dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v3 12/20] drm: omapdrm: Prevent processing the same event multiple times
Date: Mon, 12 Dec 2016 12:29:22 +0200	[thread overview]
Message-ID: <11674568.xpeZQhfd3U@avalon> (raw)
In-Reply-To: <96083e73-845f-cec2-6286-6a2eb9eb5670@ti.com>

Hi Tomi,

On Tuesday 27 Sep 2016 15:24:47 Tomi Valkeinen wrote:
> On 19/09/16 15:27, Laurent Pinchart wrote:
> > The vblank interrupt is disabled after one occurrence, preventing the
> > atomic update event from being processed twice. However, this also
> > prevents the software frame counter from being updated correctly that
> > would require vblank interrupts to be kept enabled while the CRTC is
> > active.
> > 
> > In preparation for vblank interrupt fixes, make sure that the atomic
> > update event will be processed once only when the vblank interrupt will
> > be kept enabled.
> > 
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> > 
> >  drivers/gpu/drm/omapdrm/omap_crtc.c | 22 +++++++++++++++++++---
> >  1 file changed, 19 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c
> > b/drivers/gpu/drm/omapdrm/omap_crtc.c index a0c26592fc69..8fef6558197b
> > 100644
> > --- a/drivers/gpu/drm/omapdrm/omap_crtc.c
> > +++ b/drivers/gpu/drm/omapdrm/omap_crtc.c
> > @@ -43,6 +43,7 @@ struct omap_crtc {
> >  	bool enabled;
> >  	bool pending;
> >  	wait_queue_head_t pending_wait;
> > +	struct drm_pending_vblank_event *event;
> >  };
> >  
> >  /* ----------------------------------------------------------------------
> > @@ -260,11 +261,15 @@ static const struct dss_mgr_ops mgr_ops = {
> > 
> >  static void omap_crtc_complete_page_flip(struct drm_crtc *crtc)
> >  {
> > +	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> >  	struct drm_pending_vblank_event *event;
> >  	struct drm_device *dev = crtc->dev;
> >  	unsigned long flags;
> > 
> > -	event = crtc->state->event;
> > +	spin_lock_irqsave(&dev->event_lock, flags);
> > +	event = omap_crtc->event;
> > +	omap_crtc->event = NULL;
> > +	spin_unlock_irqrestore(&dev->event_lock, flags);
> > 
> >  	if (!event)
> >  		return;
> > @@ -384,12 +389,23 @@ static int omap_crtc_atomic_check(struct drm_crtc
> > *crtc,
> >  }
> >  
> >  static void omap_crtc_atomic_begin(struct drm_crtc *crtc,
> > -                                  struct drm_crtc_state *old_crtc_state)
> > +				   struct drm_crtc_state *old_crtc_state)
> >  {
> > +	struct drm_pending_vblank_event *event = crtc->state->event;
> > +	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
> > +	unsigned long flags;
> > +
> > +	if (event) {
> > +		WARN_ON(drm_crtc_vblank_get(crtc) != 0);
> 
> Where's the matching put?

It's missing, or rather the get shouldn't be added here. The vblank get/put 
calls are added by patch 14/20 in this series. I'll remove the call from here.

-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2016-12-12 10:28 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-19 12:27 [PATCH v3 00/20] OMAP DRM fixes and improvements Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 01/20] drm: omapdrm: fb: Limit number of planes per framebuffer to two Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 02/20] drm: omapdrm: fb: Use format information provided by the DRM core Laurent Pinchart
2016-09-20 12:47   ` Tomi Valkeinen
2016-12-12 21:41     ` Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 03/20] drm: omapdrm: fb: Simplify objects lookup when creating framebuffer Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 04/20] drm: omapdrm: fb: Simplify mode command checks " Laurent Pinchart
2016-09-20 12:55   ` Tomi Valkeinen
2016-09-19 12:27 ` [PATCH v3 05/20] drm: omapdrm: fb: Turn framebuffer creation error messages into debug Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 06/20] drm: omapdrm: Handle FIFO underflow IRQs internally Laurent Pinchart
2016-09-20 13:17   ` Tomi Valkeinen
2016-09-20 13:27   ` Tomi Valkeinen
2016-12-12 21:59     ` Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 07/20] drm: omapdrm: Handle CRTC error IRQs directly Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 08/20] drm: omapdrm: Handle OCP error IRQ directly Laurent Pinchart
2016-09-20 13:34   ` Tomi Valkeinen
2016-12-12 22:09     ` Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 09/20] drm: omapdrm: Replace DSS manager state check with omapdrm CRTC state Laurent Pinchart
2016-09-20 13:44   ` Tomi Valkeinen
2016-12-12 22:16     ` Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 10/20] drm: omapdrm: Only commit planes on active CRTCs Laurent Pinchart
2016-09-20 13:51   ` Tomi Valkeinen
2016-12-12 22:53     ` Laurent Pinchart
2016-12-13  7:58       ` Tomi Valkeinen
2016-12-13 13:12         ` Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 11/20] drm: omapdrm: Check DSS manager state in the enable/disable helpers Laurent Pinchart
2016-09-20 13:57   ` Tomi Valkeinen
2016-12-12 23:07     ` Laurent Pinchart
2016-12-13  8:15       ` Tomi Valkeinen
2016-12-13 23:56         ` Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 12/20] drm: omapdrm: Prevent processing the same event multiple times Laurent Pinchart
2016-09-27 12:24   ` Tomi Valkeinen
2016-12-12 10:29     ` Laurent Pinchart [this message]
2016-09-27 15:05   ` Daniel Kurtz
2016-12-12 10:21     ` Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 13/20] drm: omapdrm: Use a spinlock to protect the CRTC pending flag Laurent Pinchart
2016-09-27 12:27   ` Tomi Valkeinen
2016-09-19 12:27 ` [PATCH v3 14/20] drm: omapdrm: Keep vblank interrupt enabled while CRTC is active Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 15/20] drm: omapdrm: Don't expose the omap_irq_(un)register() functions Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 16/20] drm: omapdrm: Remove unused parameter from omap_drm_irq handler Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 17/20] drm: omapdrm: Don't call DISPC power handling in IRQ wait functions Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 18/20] drm: omapdrm: Make pipe2vbl function static Laurent Pinchart
2016-12-12 10:41   ` Tomi Valkeinen
2016-12-12 23:17     ` Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 19/20] drm: omapdrm: Simplify IRQ wait implementation Laurent Pinchart
2016-09-19 12:27 ` [PATCH v3 20/20] drm: omapdrm: Remove global variables Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11674568.xpeZQhfd3U@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox