Re: [PROTO][PATCH 02/10] drm: rcar-du: Add r8a77995 device support

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Ulrich,

Thank you for the patch.

On Tuesday, 14 August 2018 16:49:56 EEST Ulrich Hecht wrote:
> Add support for the R-Car D3 (R8A77995) SoC to the R-Car DU driver.
> 
> Based on patch by Koji Matsuoka <koji.matsuoka.xm@renesas.com>.
> 
> Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
> ---
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.c  | 17 ++++++-----------
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c   | 26 ++++++++++++++++++++++++++
>  drivers/gpu/drm/rcar-du/rcar_du_drv.h   |  1 +
>  drivers/gpu/drm/rcar-du/rcar_du_group.c |  3 ++-
>  4 files changed, 35 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index cd6803a..9153e7a 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> @@ -53,14 +53,6 @@ static void rcar_du_crtc_clr(struct rcar_du_crtc *rcrtc,
> u32 reg, u32 clr) rcar_du_read(rcdu, rcrtc->mmio_offset + reg) & ~clr);
>  }
> 
> -static void rcar_du_crtc_set(struct rcar_du_crtc *rcrtc, u32 reg, u32 set)
> -{
> -	struct rcar_du_device *rcdu = rcrtc->group->dev;
> -
> -	rcar_du_write(rcdu, rcrtc->mmio_offset + reg,
> -		      rcar_du_read(rcdu, rcrtc->mmio_offset + reg) | set);
> -}
> -
>  static void rcar_du_crtc_clr_set(struct rcar_du_crtc *rcrtc, u32 reg,
>  				 u32 clr, u32 set)
>  {
> @@ -527,7 +519,8 @@ static void rcar_du_crtc_start(struct rcar_du_crtc
> *rcrtc) * actively driven).
>  	 */
>  	interlaced = rcrtc->crtc.mode.flags & DRM_MODE_FLAG_INTERLACE;
> -	rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK | DSYSR_SCM_MASK,
> +	rcar_du_crtc_clr_set(rcrtc, DSYSR,
> +			     DSYSR_TVM_MASK | DSYSR_SCM_MASK | DSYSR_ILTS,

The ILTS bit defaults to 0 so this shouldn't be needed. However, we never 
initialize the DSYSR register completely but only modify bits. It would be 
safer to write all bits at init time. I'll write a separate patch.

>  			     (interlaced ? DSYSR_SCM_INT_VIDEO : 0) |
>  			     DSYSR_TVM_MASTER);
> 
> @@ -596,7 +589,9 @@ static void rcar_du_crtc_stop(struct rcar_du_crtc
> *rcrtc) * Select switch sync mode. This stops display operation and
> configures * the HSYNC and VSYNC signals as inputs.
>  	 */
> -	rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK, DSYSR_TVM_SWITCH);
> +	rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK | DSYSR_ILTS,
> +		rcar_du_needs(rcrtc->group->dev, RCAR_DU_QUIRK_TVM_MASTER_ONLY) ?
> +		DSYSR_TVM_MASTER : DSYSR_TVM_SWITCH);

Now this is a problem. The driver uses switch mode as a way to disable the 
display output, as the display enable bits in the DSYSR register cover a group 
of two DU channels. TVM switch mode was the only workaround I found to be able 
to disable the display output. If the D3 and E3 SoCs don't implement TVM 
switch mode we need a different mechanism.

>  	rcar_du_group_start_stop(rcrtc->group, false);
>  }
> @@ -744,7 +739,7 @@ static int rcar_du_crtc_enable_vblank(struct drm_crtc
> *crtc) struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
> 
>  	rcar_du_crtc_write(rcrtc, DSRCR, DSRCR_VBCL);
> -	rcar_du_crtc_set(rcrtc, DIER, DIER_VBE);
> +	rcar_du_crtc_clr_set(rcrtc, DIER, DIER_TVE | DIER_FRE, DIER_VBE);
>  	rcrtc->vblank_enable = true;
> 
>  	return 0;
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index 56f9472..5c2f764 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> @@ -294,6 +294,31 @@ static const struct rcar_du_device_info
> rcar_du_r8a77970_info = { .num_lvds = 1,
>  };
> 
> +static const struct rcar_du_device_info rcar_du_r8a77995_info = {
> +	.gen = 3,
> +	.features = RCAR_DU_FEATURE_CRTC_IRQ_CLOCK
> +		  | RCAR_DU_FEATURE_EXT_CTRL_REGS
> +		  | RCAR_DU_FEATURE_VSP1_SOURCE,
> +	.quirks = RCAR_DU_QUIRK_TVM_MASTER_ONLY,
> +	.channels_mask = BIT(1) | BIT(0),
> +	.routes = {
> +		/* R8A77995 has two LVDS output and one RGB output. */
> +		[RCAR_DU_OUTPUT_DPAD0] = {
> +			.possible_crtcs = BIT(0) | BIT(1),
> +			.port = 0,
> +		},
> +		[RCAR_DU_OUTPUT_LVDS0] = {
> +			.possible_crtcs = BIT(0),
> +			.port = 1,
> +		},
> +		[RCAR_DU_OUTPUT_LVDS1] = {
> +			.possible_crtcs = BIT(1),
> +			.port = 2,
> +		},
> +	},
> +	.num_lvds = 2,
> +};
> +
>  static const struct of_device_id rcar_du_of_table[] = {
>  	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
>  	{ .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
> @@ -307,6 +332,7 @@ static const struct of_device_id rcar_du_of_table[] = {
>  	{ .compatible = "renesas,du-r8a7796", .data = &rcar_du_r8a7796_info },
>  	{ .compatible = "renesas,du-r8a77965", .data = &rcar_du_r8a77965_info },
>  	{ .compatible = "renesas,du-r8a77970", .data = &rcar_du_r8a77970_info },
> +	{ .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a77995_info },
>  	{ }
>  };
> 
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> b/drivers/gpu/drm/rcar-du/rcar_du_drv.h index b3a25e8..6257405 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> @@ -32,6 +32,7 @@ struct rcar_du_device;
>  #define RCAR_DU_FEATURE_VSP1_SOURCE	(1 << 2)	/* Has inputs from VSP1 */
> 
>  #define RCAR_DU_QUIRK_ALIGN_128B	(1 << 0)	/* Align pitches to 128 bytes 
*/
> +#define RCAR_DU_QUIRK_TVM_MASTER_ONLY	(1 << 1)	/* Does not have TV
> switch/sync modes */
> 
>  /*
>   * struct rcar_du_output_routing - Output routing specification
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.c
> b/drivers/gpu/drm/rcar-du/rcar_du_group.c index d539cb2..9a0a694 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_group.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_group.c
> @@ -178,7 +178,8 @@ void rcar_du_group_put(struct rcar_du_group *rgrp)
>  static void __rcar_du_group_start_stop(struct rcar_du_group *rgrp, bool
> start) {
>  	rcar_du_group_write(rgrp, DSYSR,
> -		(rcar_du_group_read(rgrp, DSYSR) & ~(DSYSR_DRES | DSYSR_DEN)) |
> +		(rcar_du_group_read(rgrp, DSYSR) &
> +		 ~(DSYSR_DRES | DSYSR_DEN | DSYSR_ILTS)) |
>  		(start ? DSYSR_DEN : DSYSR_DRES));
>  }

-- 
Regards,

Laurent Pinchart



_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel