dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Alex Deucher <alexdeucher@gmail.com>
To: airlied@gmail.com, dri-devel@lists.freedesktop.org
Subject: [PATCH 18/18] drm/radeon/kms: fixup eDP connector handling
Date: Fri, 20 May 2011 04:34:31 -0400	[thread overview]
Message-ID: <1305880471-1472-18-git-send-email-alexdeucher@gmail.com> (raw)
In-Reply-To: <1305880471-1472-1-git-send-email-alexdeucher@gmail.com>

It's more like LVDS then DP in some ways.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
---
 drivers/gpu/drm/radeon/radeon_connectors.c |   80 +++++++++++++++++++++++++---
 1 files changed, 72 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 532f17d..ee1dccb 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -1055,16 +1055,44 @@ static int radeon_dp_get_modes(struct drm_connector *connector)
 	int ret;
 
 	if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+		struct drm_encoder *encoder;
+		struct drm_display_mode *mode;
+
 		if (!radeon_dig_connector->edp_on)
 			atombios_set_edp_panel_power(connector,
 						     ATOM_TRANSMITTER_ACTION_POWER_ON);
-	}
-	ret = radeon_ddc_get_modes(radeon_connector);
-	if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+		ret = radeon_ddc_get_modes(radeon_connector);
 		if (!radeon_dig_connector->edp_on)
 			atombios_set_edp_panel_power(connector,
 						     ATOM_TRANSMITTER_ACTION_POWER_OFF);
-	}
+
+		if (ret > 0) {
+			encoder = radeon_best_single_encoder(connector);
+			if (encoder) {
+				radeon_fixup_lvds_native_mode(encoder, connector);
+				/* add scaled modes */
+				radeon_add_common_modes(encoder, connector);
+			}
+			return ret;
+		}
+
+		encoder = radeon_best_single_encoder(connector);
+		if (!encoder)
+			return 0;
+
+		/* we have no EDID modes */
+		mode = radeon_fp_native_mode(encoder);
+		if (mode) {
+			ret = 1;
+			drm_mode_probed_add(connector, mode);
+			/* add the width/height from vbios tables if available */
+			connector->display_info.width_mm = mode->width_mm;
+			connector->display_info.height_mm = mode->height_mm;
+			/* add scaled modes */
+			radeon_add_common_modes(encoder, connector);
+		}
+	} else
+		ret = radeon_ddc_get_modes(radeon_connector);
 
 	return ret;
 }
@@ -1155,6 +1183,15 @@ radeon_dp_detect(struct drm_connector *connector, bool force)
 	}
 
 	if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+		struct drm_encoder *encoder = radeon_best_single_encoder(connector);
+		if (encoder) {
+			struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+			struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
+
+			/* check if panel is valid */
+			if (native_mode->hdisplay >= 320 && native_mode->vdisplay >= 240)
+				ret = connector_status_connected;
+		}
 		/* eDP is always DP */
 		radeon_dig_connector->dp_sink_type = CONNECTOR_OBJECT_ID_DISPLAYPORT;
 		if (!radeon_dig_connector->edp_on)
@@ -1194,11 +1231,38 @@ static int radeon_dp_mode_valid(struct drm_connector *connector,
 
 	/* XXX check mode bandwidth */
 
-	if ((radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) ||
-	    (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP))
-		return radeon_dp_mode_valid_helper(connector, mode);
-	else
+	if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+		struct drm_encoder *encoder = radeon_best_single_encoder(connector);
+
+		if ((mode->hdisplay < 320) || (mode->vdisplay < 240))
+			return MODE_PANEL;
+
+		if (encoder) {
+			struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+			struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
+
+		/* AVIVO hardware supports downscaling modes larger than the panel
+			 * to the panel size, but I'm not sure this is desirable.
+			 */
+			if ((mode->hdisplay > native_mode->hdisplay) ||
+			    (mode->vdisplay > native_mode->vdisplay))
+				return MODE_PANEL;
+
+			/* if scaling is disabled, block non-native modes */
+			if (radeon_encoder->rmx_type == RMX_OFF) {
+				if ((mode->hdisplay != native_mode->hdisplay) ||
+				    (mode->vdisplay != native_mode->vdisplay))
+					return MODE_PANEL;
+			}
+		}
 		return MODE_OK;
+	} else {
+		if ((radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) ||
+		    (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP))
+			return radeon_dp_mode_valid_helper(connector, mode);
+		else
+			return MODE_OK;
+	}
 }
 
 struct drm_connector_helper_funcs radeon_dp_connector_helper_funcs = {
-- 
1.7.1.1

      parent reply	other threads:[~2011-05-20  8:35 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-20  8:34 [PATCH 01/18] drm/radeon/kms: DCE4.1 DIG encoders are fully routeable just like DCE3.2 Alex Deucher
2011-05-20  8:34 ` [PATCH 02/18] drm/radeon/kms: properly handle bpc >8 in atom command tables Alex Deucher
2011-05-20  8:34 ` [PATCH 03/18] drm/radeon/kms: spread spectrum fixes Alex Deucher
2011-05-20  8:34 ` [PATCH 04/18] drm/radeon/kms: fix up DP clock programming on DCE4/5 Alex Deucher
2011-05-20  8:34 ` [PATCH 05/18] drm/radeon/kms: adjust eDP handling (v2) Alex Deucher
2011-05-20  8:34 ` [PATCH 06/18] drm/radeon/kms: fix eDP panel power function Alex Deucher
2011-05-20  8:34 ` [PATCH 07/18] drm/radeon/kms: make sure eDP panel is on for modesetting Alex Deucher
2011-05-20  8:34 ` [PATCH 08/18] drm/radeon/kms: add some dp encoder/connector helper funcs Alex Deucher
2011-05-20  8:34 ` [PATCH 09/18] drm/radeon/kms: handle DP bridges Alex Deucher
2011-05-20  8:34 ` [PATCH 10/18] drm/radeon/kms: improve DP detect logic Alex Deucher
2011-05-20  8:34 ` [PATCH 11/18] drm/radeon/kms: improve aux error handling Alex Deucher
2011-05-20  8:34 ` [PATCH 12/18] drm/dp: add some new DP regs for DP 1.2 Alex Deucher
2011-05-20  8:34 ` [PATCH 13/18] drm/radeon/kms: atombios.h updates for DP panel mode Alex Deucher
2011-05-20  8:34 ` [PATCH 14/18] drm/radeon/kms/atom: add support for setting " Alex Deucher
2011-05-20  8:34 ` [PATCH 15/18] drm/radeon/kms: rewrite DP handling Alex Deucher
2011-05-20  8:34 ` [PATCH 16/18] drm/radeon/kms: simplify hotplug handler logic Alex Deucher
2011-05-20  8:34 ` [PATCH 17/18] drm/radeon/kms: bail early for eDP in hotplug callback Alex Deucher
2011-05-20  8:34 ` Alex Deucher [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1305880471-1472-18-git-send-email-alexdeucher@gmail.com \
    --to=alexdeucher@gmail.com \
    --cc=airlied@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).