From: Alex Deucher <alexdeucher@gmail.com>
To: airlied@gmail.com, dri-devel@lists.freedesktop.org
Subject: [PATCH 04/18] drm/radeon/kms: fix up DP clock programming on DCE4/5
Date: Fri, 20 May 2011 04:34:17 -0400 [thread overview]
Message-ID: <1305880471-1472-4-git-send-email-alexdeucher@gmail.com> (raw)
In-Reply-To: <1305880471-1472-1-git-send-email-alexdeucher@gmail.com>
In DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock,
depending on the asic. The crtc virtual pixel clock is derived from
the DP ref clock.
- DCE4: PPLL or ext clock
- DCE5: DCPLL or ext clock
Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip
PPLL/DCPLL programming and only program the DP DTO for the
crtc virtual pixel clock.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
---
drivers/gpu/drm/radeon/atombios_crtc.c | 12 ++++++++++--
drivers/gpu/drm/radeon/radeon_encoders.c | 11 ++++++++---
2 files changed, 18 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index ff0d1ca..9770aff 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1443,11 +1443,19 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc)
uint32_t pll_in_use = 0;
if (ASIC_IS_DCE4(rdev)) {
- /* if crtc is driving DP and we have an ext clock, use that */
list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
if (test_encoder->crtc && (test_encoder->crtc == crtc)) {
+ /* in DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock,
+ * depending on the asic:
+ * DCE4: PPLL or ext clock
+ * DCE5: DCPLL or ext clock
+ *
+ * Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip
+ * PPLL/DCPLL programming and only program the DP DTO for the
+ * crtc virtual pixel clock.
+ */
if (atombios_get_encoder_mode(test_encoder) == ATOM_ENCODER_MODE_DP) {
- if (rdev->clock.dp_extclk)
+ if (ASIC_IS_DCE5(rdev) || rdev->clock.dp_extclk)
return ATOM_PPLL_INVALID;
}
}
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 6c6793e..4d66e24 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -988,11 +988,16 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t
}
if (ASIC_IS_DCE5(rdev)) {
- if (is_dp && rdev->clock.dp_extclk)
- args.v4.acConfig.ucRefClkSource = 3; /* external src */
- else
+ /* On DCE5 DCPLL usually generates the DP ref clock */
+ if (is_dp) {
+ if (rdev->clock.dp_extclk)
+ args.v4.acConfig.ucRefClkSource = ENCODER_REFCLK_SRC_EXTCLK;
+ else
+ args.v4.acConfig.ucRefClkSource = ENCODER_REFCLK_SRC_DCPLL;
+ } else
args.v4.acConfig.ucRefClkSource = pll_id;
} else {
+ /* On DCE4, if there is an external clock, it generates the DP ref clock */
if (is_dp && rdev->clock.dp_extclk)
args.v3.acConfig.ucRefClkSource = 2; /* external src */
else
--
1.7.1.1
next prev parent reply other threads:[~2011-05-20 8:34 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-20 8:34 [PATCH 01/18] drm/radeon/kms: DCE4.1 DIG encoders are fully routeable just like DCE3.2 Alex Deucher
2011-05-20 8:34 ` [PATCH 02/18] drm/radeon/kms: properly handle bpc >8 in atom command tables Alex Deucher
2011-05-20 8:34 ` [PATCH 03/18] drm/radeon/kms: spread spectrum fixes Alex Deucher
2011-05-20 8:34 ` Alex Deucher [this message]
2011-05-20 8:34 ` [PATCH 05/18] drm/radeon/kms: adjust eDP handling (v2) Alex Deucher
2011-05-20 8:34 ` [PATCH 06/18] drm/radeon/kms: fix eDP panel power function Alex Deucher
2011-05-20 8:34 ` [PATCH 07/18] drm/radeon/kms: make sure eDP panel is on for modesetting Alex Deucher
2011-05-20 8:34 ` [PATCH 08/18] drm/radeon/kms: add some dp encoder/connector helper funcs Alex Deucher
2011-05-20 8:34 ` [PATCH 09/18] drm/radeon/kms: handle DP bridges Alex Deucher
2011-05-20 8:34 ` [PATCH 10/18] drm/radeon/kms: improve DP detect logic Alex Deucher
2011-05-20 8:34 ` [PATCH 11/18] drm/radeon/kms: improve aux error handling Alex Deucher
2011-05-20 8:34 ` [PATCH 12/18] drm/dp: add some new DP regs for DP 1.2 Alex Deucher
2011-05-20 8:34 ` [PATCH 13/18] drm/radeon/kms: atombios.h updates for DP panel mode Alex Deucher
2011-05-20 8:34 ` [PATCH 14/18] drm/radeon/kms/atom: add support for setting " Alex Deucher
2011-05-20 8:34 ` [PATCH 15/18] drm/radeon/kms: rewrite DP handling Alex Deucher
2011-05-20 8:34 ` [PATCH 16/18] drm/radeon/kms: simplify hotplug handler logic Alex Deucher
2011-05-20 8:34 ` [PATCH 17/18] drm/radeon/kms: bail early for eDP in hotplug callback Alex Deucher
2011-05-20 8:34 ` [PATCH 18/18] drm/radeon/kms: fixup eDP connector handling Alex Deucher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1305880471-1472-4-git-send-email-alexdeucher@gmail.com \
--to=alexdeucher@gmail.com \
--cc=airlied@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).