[PATCH] drm/radeon/kms: properly set panel mode for eDP

[Alex Deucher <alexdeucher@gmail.com>]

This should make eDP more reliable.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
---
 drivers/gpu/drm/radeon/atombios_dp.c |   11 +++++++++++
 include/drm/drm_dp_helper.h          |    3 +++
 2 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 8c0f9e3..892b88d 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -543,6 +543,7 @@ static void radeon_dp_set_panel_mode(struct drm_encoder *encoder,
 {
 	struct drm_device *dev = encoder->dev;
 	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 	int panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE;
 
 	if (!ASIC_IS_DCE4(rdev))
@@ -550,10 +551,20 @@ static void radeon_dp_set_panel_mode(struct drm_encoder *encoder,
 
 	if (radeon_connector_encoder_is_dp_bridge(connector))
 		panel_mode = DP_PANEL_MODE_INTERNAL_DP1_MODE;
+	else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+		u8 tmp = radeon_read_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_CAP);
+		if (tmp & 1)
+			panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE;
+	}
 
 	atombios_dig_encoder_setup(encoder,
 				   ATOM_ENCODER_CMD_SETUP_PANEL_MODE,
 				   panel_mode);
+
+	if ((connector->connector_type == DRM_MODE_CONNECTOR_eDP) &&
+	    (panel_mode == DP_PANEL_MODE_INTERNAL_DP2_MODE)) {
+		radeon_write_dpcd_reg(radeon_connector, DP_EDP_CONFIGURATION_SET, 1);
+	}
 }
 
 void radeon_dp_set_link_config(struct drm_connector *connector,
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 91567bb..03eb1d6 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -72,6 +72,7 @@
 
 #define DP_MAIN_LINK_CHANNEL_CODING         0x006
 
+#define DP_EDP_CONFIGURATION_CAP            0x00d
 #define DP_TRAINING_AUX_RD_INTERVAL         0x00e
 
 /* link configuration */
@@ -133,6 +134,8 @@
 #define DP_MAIN_LINK_CHANNEL_CODING_SET	    0x108
 # define DP_SET_ANSI_8B10B		    (1 << 0)
 
+#define DP_EDP_CONFIGURATION_SET            0x10a
+
 #define DP_LANE0_1_STATUS		    0x202
 #define DP_LANE2_3_STATUS		    0x203
 # define DP_LANE_CR_DONE		    (1 << 0)
-- 
1.7.4