From: Rob Clark <rob.clark@linaro.org>
To: dri-devel@lists.freedesktop.org
Cc: patches@linaro.org, daniel.vetter@ffwll.ch,
laurent.pinchart@ideasonboard.com, gregkh@linuxfoundation.org,
Rob Clark <rob@ti.com>,
bskeggs@redhat.com
Subject: [PATCH 01/11] drm: add drm_send_vblank_event() helper (v3)
Date: Thu, 11 Oct 2012 19:29:15 -0500 [thread overview]
Message-ID: <1350001756-5460-1-git-send-email-rob.clark@linaro.org> (raw)
From: Rob Clark <rob@ti.com>
A helper that drivers can use to send vblank event after a pageflip.
If the driver doesn't support proper vblank irq based time/seqn then
just pass -1 for the pipe # to get do_gettimestamp() behavior (since
there are a lot of drivers that don't use drm_vblank_count_and_time())
Also an internal send_vblank_event() helper for the various other code
paths within drm_irq that also need to send vblank events.
v1: original
v2: add back 'vblwait->reply.sequence = seq' which should not have
been deleted
v3: add WARN_ON() in case lock is not held and comments
Signed-off-by: Rob Clark <rob@ti.com>
---
drivers/gpu/drm/drm_irq.c | 74 +++++++++++++++++++++++++++++++--------------
include/drm/drmP.h | 2 ++
2 files changed, 54 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 076c4a8..d623a06 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -802,6 +802,46 @@ u32 drm_vblank_count_and_time(struct drm_device *dev, int crtc,
}
EXPORT_SYMBOL(drm_vblank_count_and_time);
+static void send_vblank_event(struct drm_device *dev,
+ struct drm_pending_vblank_event *e,
+ unsigned long seq, struct timeval *now)
+{
+ WARN_ON(!spin_is_locked(&dev->event_lock));
+ e->event.sequence = seq;
+ e->event.tv_sec = now->tv_sec;
+ e->event.tv_usec = now->tv_usec;
+
+ list_add_tail(&e->base.link,
+ &e->base.file_priv->event_list);
+ wake_up_interruptible(&e->base.file_priv->event_wait);
+ trace_drm_vblank_event_delivered(e->base.pid, e->pipe,
+ e->event.sequence);
+}
+
+/**
+ * drm_send_vblank_event - helper to send vblank event after pageflip
+ * @dev: DRM device
+ * @crtc: CRTC in question
+ * @e: the event to send
+ *
+ * Updates sequence # and timestamp on event, and sends it to userspace.
+ * Caller must hold event lock.
+ */
+void drm_send_vblank_event(struct drm_device *dev, int crtc,
+ struct drm_pending_vblank_event *e)
+{
+ struct timeval now;
+ unsigned int seq;
+ if (crtc >= 0) {
+ seq = drm_vblank_count_and_time(dev, crtc, &now);
+ } else {
+ seq = 0;
+ do_gettimeofday(&now);
+ }
+ send_vblank_event(dev, e, seq, &now);
+}
+EXPORT_SYMBOL(drm_send_vblank_event);
+
/**
* drm_update_vblank_count - update the master vblank counter
* @dev: DRM device
@@ -936,6 +976,13 @@ void drm_vblank_put(struct drm_device *dev, int crtc)
}
EXPORT_SYMBOL(drm_vblank_put);
+/**
+ * drm_vblank_off - disable vblank events on a CRTC
+ * @dev: DRM device
+ * @crtc: CRTC in question
+ *
+ * Caller must hold event lock.
+ */
void drm_vblank_off(struct drm_device *dev, int crtc)
{
struct drm_pending_vblank_event *e, *t;
@@ -955,15 +1002,9 @@ void drm_vblank_off(struct drm_device *dev, int crtc)
DRM_DEBUG("Sending premature vblank event on disable: \
wanted %d, current %d\n",
e->event.sequence, seq);
-
- e->event.sequence = seq;
- e->event.tv_sec = now.tv_sec;
- e->event.tv_usec = now.tv_usec;
+ list_del(&e->base.link);
drm_vblank_put(dev, e->pipe);
- list_move_tail(&e->base.link, &e->base.file_priv->event_list);
- wake_up_interruptible(&e->base.file_priv->event_wait);
- trace_drm_vblank_event_delivered(e->base.pid, e->pipe,
- e->event.sequence);
+ send_vblank_event(dev, e, seq, &now);
}
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
@@ -1107,15 +1148,9 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe,
e->event.sequence = vblwait->request.sequence;
if ((seq - vblwait->request.sequence) <= (1 << 23)) {
- e->event.sequence = seq;
- e->event.tv_sec = now.tv_sec;
- e->event.tv_usec = now.tv_usec;
drm_vblank_put(dev, pipe);
- list_add_tail(&e->base.link, &e->base.file_priv->event_list);
- wake_up_interruptible(&e->base.file_priv->event_wait);
+ send_vblank_event(dev, e, seq, &now);
vblwait->reply.sequence = seq;
- trace_drm_vblank_event_delivered(current->pid, pipe,
- vblwait->request.sequence);
} else {
/* drm_handle_vblank_events will call drm_vblank_put */
list_add_tail(&e->base.link, &dev->vblank_event_list);
@@ -1256,14 +1291,9 @@ static void drm_handle_vblank_events(struct drm_device *dev, int crtc)
DRM_DEBUG("vblank event on %d, current %d\n",
e->event.sequence, seq);
- e->event.sequence = seq;
- e->event.tv_sec = now.tv_sec;
- e->event.tv_usec = now.tv_usec;
+ list_del(&e->base.link);
drm_vblank_put(dev, e->pipe);
- list_move_tail(&e->base.link, &e->base.file_priv->event_list);
- wake_up_interruptible(&e->base.file_priv->event_wait);
- trace_drm_vblank_event_delivered(e->base.pid, e->pipe,
- e->event.sequence);
+ send_vblank_event(dev, e, seq, &now);
}
spin_unlock_irqrestore(&dev->event_lock, flags);
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 05af0e7..ee8f927 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -1437,6 +1437,8 @@ extern int drm_vblank_wait(struct drm_device *dev, unsigned int *vbl_seq);
extern u32 drm_vblank_count(struct drm_device *dev, int crtc);
extern u32 drm_vblank_count_and_time(struct drm_device *dev, int crtc,
struct timeval *vblanktime);
+extern void drm_send_vblank_event(struct drm_device *dev, int crtc,
+ struct drm_pending_vblank_event *e);
extern bool drm_handle_vblank(struct drm_device *dev, int crtc);
extern int drm_vblank_get(struct drm_device *dev, int crtc);
extern void drm_vblank_put(struct drm_device *dev, int crtc);
--
1.7.9.5
next reply other threads:[~2012-10-12 0:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-12 0:29 Rob Clark [this message]
2012-10-12 17:05 ` [PATCH 01/11] drm: add drm_send_vblank_event() helper (v3) Marcin Slusarz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350001756-5460-1-git-send-email-rob.clark@linaro.org \
--to=rob.clark@linaro.org \
--cc=bskeggs@redhat.com \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=gregkh@linuxfoundation.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=patches@linaro.org \
--cc=rob@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox