* 3.8-rc2: lockdep warning in nouveau driver
@ 2013-01-09 11:45 Arend van Spriel
2013-01-29 14:56 ` Peter Hurley
0 siblings, 1 reply; 2+ messages in thread
From: Arend van Spriel @ 2013-01-09 11:45 UTC (permalink / raw)
To: dri-devel; +Cc: linux-kernel@vger.kernel.org, Ben Skeggs
Maybe this one is already known, but I did not find a post about it. So
here it is.
Regards,
Arend
==========================================================================
[ 9.422018] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 9.436177] [TTM] Zone kernel: Available graphics memory: 433698 kiB
[ 9.442676] [TTM] Zone highmem: Available graphics memory: 1678052 kiB
[ 9.449256] [TTM] Initializing pool allocator
[ 9.455462] nouveau [ DRM] VRAM: 512 MiB
[ 9.459851] nouveau [ DRM] GART: 512 MiB
[ 9.464227] nouveau [ DRM] BIT BIOS found
[ 9.468709] nouveau [ DRM] Bios version 70.18.53.00
[ 9.474040] nouveau [ DRM] TMDS table version 2.0
[ 9.479196] nouveau [ DRM] DCB version 4.0
[ 9.483746] nouveau [ DRM] DCB outp 00: 048003b6 0f200014
[ 9.489580] nouveau [ DRM] DCB outp 01: 02033300 00000000
[ 9.495431] nouveau [ DRM] DCB outp 02: 088223a6 0f220010
[ 9.501278] nouveau [ DRM] DCB outp 03: 08022362 00020010
[ 9.507124] nouveau [ DRM] DCB outp 04: 028113c6 0f220010
[ 9.512970] nouveau [ DRM] DCB outp 05: 02011382 00020010
[ 9.518804] nouveau [ DRM] DCB conn 00: 00002047
[ 9.523059] hub 1-1.2:1.0: USB hub found
[ 9.523201] hub 1-1.2:1.0: 3 ports detected
[ 9.532105] nouveau [ DRM] DCB conn 01: 00101146
[ 9.537360] nouveau [ DRM] DCB conn 02: 00410246
[ 9.542450] nouveau [ DRM] DCB conn 03: 00000300
[ 9.588499]
[ 9.589986] =============================================
[ 9.595365] [ INFO: possible recursive locking detected ]
[ 9.600745] 3.8.0-rc2-wl-testing-lockdep-00002-ga524cf0 #1 Not tainted
[ 9.607248] ---------------------------------------------
[ 9.612626] modprobe/163 is trying to acquire lock:
[ 9.617486] (&subdev->mutex){+.+.+.}, at: [<f8929c12>]
nv50_fb_vram_new+0x92/0x230 [nouveau]
[ 9.626052]
[ 9.626052] but task is already holding lock:
[ 9.631865] (&subdev->mutex){+.+.+.}, at: [<f8936505>]
nv50_disp_data_ctor+0x55/0xc0 [nouveau]
[ 9.640593]
[ 9.640593] other info that might help us debug this:
[ 9.647096] Possible unsafe locking scenario:
[ 9.647096]
[ 9.652995] CPU0
[ 9.655430] ----
[ 9.657867] lock(&subdev->mutex);
[ 9.661365] lock(&subdev->mutex);
[ 9.664863]
[ 9.664863] *** DEADLOCK ***
[ 9.664863]
[ 9.670762] May be due to missing lock nesting notation
[ 9.670762]
[ 9.677526] 4 locks held by modprobe/163:
[ 9.681520] #0: (&__lockdep_no_validate__){......}, at:
[<c1364f40>] __driver_attach+0x50/0xa0
[ 9.690341] #1: (&__lockdep_no_validate__){......}, at:
[<c1364f4c>] __driver_attach+0x5c/0xa0
[ 9.699156] #2: (drm_global_mutex){+.+.+.}, at: [<f87814b8>]
drm_get_pci_dev+0xa8/0x260 [drm]
[ 9.707899] #3: (&subdev->mutex){+.+.+.}, at: [<f8936505>]
nv50_disp_data_ctor+0x55/0xc0 [nouveau]
[ 9.717075]
[ 9.717075] stack backtrace:
[ 9.721417] Pid: 163, comm: modprobe Not tainted
3.8.0-rc2-wl-testing-lockdep-00002-ga524cf0 #1
[ 9.730085] Call Trace:
[ 9.732524] [<c1096603>] __lock_acquire+0x12f3/0x1780
[ 9.737644] [<c10927a0>] ? noop_count+0x10/0x10
[ 9.742246] [<c1094b0b>] ? check_usage+0x6b/0x410
[ 9.747021] [<c1096f94>] lock_acquire+0x84/0x120
[ 9.751721] [<f8929c12>] ? nv50_fb_vram_new+0x92/0x230 [nouveau]
[ 9.757797] [<c1514264>] mutex_lock_nested+0x64/0x2e0
[ 9.762929] [<f8929c12>] ? nv50_fb_vram_new+0x92/0x230 [nouveau]
[ 9.769012] [<f8929bde>] ? nv50_fb_vram_new+0x5e/0x230 [nouveau]
[ 9.775096] [<f8929c12>] nv50_fb_vram_new+0x92/0x230 [nouveau]
[ 9.781008] [<f892df5e>] nv50_instobj_ctor+0xae/0xf0 [nouveau]
[ 9.786918] [<f8913f3b>] nouveau_object_ctor+0x3b/0xe0 [nouveau]
[ 9.793001] [<f892dcdd>] nv50_instmem_alloc+0x2d/0x40 [nouveau]
[ 9.798996] [<f8912922>] nouveau_gpuobj_create_+0x232/0x2b0 [nouveau]
[ 9.805501] [<c15172b6>] ? _raw_spin_unlock_irqrestore+0x36/0x70
[ 9.811574] [<c1097834>] ? trace_hardirqs_on_caller+0xf4/0x180
[ 9.817483] [<f8911480>] nouveau_engctx_create_+0x220/0x260 [nouveau]
[ 9.824002] [<f893655f>] nv50_disp_data_ctor+0xaf/0xc0 [nouveau]
[ 9.830086] [<f8913f3b>] nouveau_object_ctor+0x3b/0xe0 [nouveau]
[ 9.836168] [<f89147e9>] nouveau_object_new+0xe9/0x220 [nouveau]
[ 9.842258] [<f89a455c>] nv50_display_create+0x18c/0x850 [nouveau]
[ 9.848505] [<c10555fa>] ? __cancel_work_timer+0x5a/0xb0
[ 9.853884] [<c1097834>] ? trace_hardirqs_on_caller+0xf4/0x180
[ 9.859783] [<c105560a>] ? __cancel_work_timer+0x6a/0xb0
[ 9.865181] [<f898d3f5>] nouveau_display_create+0x415/0x6a0 [nouveau]
[ 9.871700] [<f897e16b>] nouveau_drm_load+0x28b/0x5d0 [nouveau]
[ 9.877688] [<c1362bc7>] ? device_register+0x17/0x20
[ 9.882727] [<f8782bfa>] ? drm_sysfs_device_add+0x7a/0xa0 [drm]
[ 9.888719] [<f877f920>] ? drm_get_minor+0x220/0x2b0 [drm]
[ 9.894279] [<f878155b>] drm_get_pci_dev+0x14b/0x260 [drm]
[ 9.899833] [<c12c81c7>] ? __pci_set_master+0x27/0x80
[ 9.904969] [<f897db3e>] nouveau_drm_probe+0x20e/0x250 [nouveau]
[ 9.911042] [<c12cd6b3>] pci_device_probe+0x83/0xc0
[ 9.915989] [<c1364d64>] driver_probe_device+0x64/0x1f0
[ 9.921282] [<c1364f89>] __driver_attach+0x99/0xa0
[ 9.926143] [<c1364ef0>] ? driver_probe_device+0x1f0/0x1f0
[ 9.931696] [<c13635c2>] bus_for_each_dev+0x42/0x70
[ 9.936644] [<c1364931>] driver_attach+0x21/0x30
[ 9.941333] [<c1364ef0>] ? driver_probe_device+0x1f0/0x1f0
[ 9.946885] [<c1364557>] bus_add_driver+0x187/0x280
[ 9.951831] [<c12cc780>] ? pci_dev_put+0x20/0x20
[ 9.956518] [<c12cc780>] ? pci_dev_put+0x20/0x20
[ 9.961206] [<c136541a>] driver_register+0x6a/0x130
[ 9.966153] [<c12b8142>] ? __raw_spin_lock_init+0x32/0x60
[ 9.971618] [<c12cc90a>] __pci_register_driver+0x4a/0x50
[ 9.977005] [<f878176d>] drm_pci_init+0xfd/0x110 [drm]
[ 9.982219] [<f89e0048>] nouveau_drm_init+0x48/0x4a [nouveau]
[ 9.988033] [<c1001144>] do_one_initcall+0x34/0x170
[ 9.992980] [<f89e0000>] ? 0xf89dffff
[ 9.996717] [<c10a2013>] load_module+0x1a73/0x22a0
[ 10.001579] [<c10a28c6>] sys_init_module+0x86/0xa0
[ 10.006440] [<c151ebad>] sysenter_do_call+0x12/0x38
[ 10.011744] usb 1-1.4: new high-speed USB device number 5 using ehci-pci
[ 10.012623] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 10.012623] [drm] No driver support for vblank timestamp query.
[ 10.012625] nouveau [ DRM] ACPI backlight interface available,
not registering our own
[ 10.208606] usb 2-1.7: new full-speed USB device number 3 using ehci-pci
[ 10.233173] nouveau [ DRM] 3 available performance level(s)
[ 10.239278] nouveau [ DRM] 0: core 135MHz shader 270MHz memory
135MHz voltage 850mV
[ 10.247417] nouveau [ DRM] 1: core 405MHz shader 810MHz memory
405MHz voltage 850mV
[ 10.255553] nouveau [ DRM] 3: core 606MHz shader 1468MHz memory
790MHz voltage 1000mV
[ 10.263865] nouveau [ DRM] c: core 405MHz shader 810MHz memory
405MHz voltage 1000mV
[ 10.314402] nouveau [ DRM] MM: using COPY for buffer copies
[ 10.380308] usb 2-1.8: new full-speed USB device number 4 using ehci-pci
[ 10.503748] usb 2-1.8: config 0 descriptor??
[ 10.568285] nouveau [ DRM] allocated 1920x1080 fb: 0x70000, bo
f717be00
[ 10.575405] fbcon: nouveaufb (fb0) is primary device
[ 10.837296] Console: switching to colour frame buffer device 180x56
[ 10.844686] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 10.851053] nouveau 0000:01:00.0: registered panic notifier
[ 10.856646] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0
on minor 0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: 3.8-rc2: lockdep warning in nouveau driver
2013-01-09 11:45 3.8-rc2: lockdep warning in nouveau driver Arend van Spriel
@ 2013-01-29 14:56 ` Peter Hurley
0 siblings, 0 replies; 2+ messages in thread
From: Peter Hurley @ 2013-01-29 14:56 UTC (permalink / raw)
To: Ben Skeggs; +Cc: dri-devel, linux-kernel@vger.kernel.org, Arend van Spriel
On Wed, 2013-01-09 at 12:45 +0100, Arend van Spriel wrote:
> Maybe this one is already known, but I did not find a post about it. So
> here it is.
>
> Regards,
> Arend
[snip]
> [ 9.589986] =============================================
> [ 9.595365] [ INFO: possible recursive locking detected ]
> [ 9.600745] 3.8.0-rc2-wl-testing-lockdep-00002-ga524cf0 #1 Not tainted
> [ 9.607248] ---------------------------------------------
> [ 9.612626] modprobe/163 is trying to acquire lock:
> [ 9.617486] (&subdev->mutex){+.+.+.}, at: [<f8929c12>]
> nv50_fb_vram_new+0x92/0x230 [nouveau]
> [ 9.626052]
> [ 9.626052] but task is already holding lock:
> [ 9.631865] (&subdev->mutex){+.+.+.}, at: [<f8936505>]
> nv50_disp_data_ctor+0x55/0xc0 [nouveau]
> [ 9.640593]
> [ 9.640593] other info that might help us debug this:
> [ 9.647096] Possible unsafe locking scenario:
> [ 9.647096]
> [ 9.652995] CPU0
> [ 9.655430] ----
> [ 9.657867] lock(&subdev->mutex);
> [ 9.661365] lock(&subdev->mutex);
> [ 9.664863]
> [ 9.664863] *** DEADLOCK ***
> [ 9.664863]
> [ 9.670762] May be due to missing lock nesting notation
Same.
[ 5.995881] =============================================
[ 5.995886] [ INFO: possible recursive locking detected ]
[ 5.995892] 3.8.0-next-20130125+ttypatch-xeon+lockdep #20130125+ttypatch Not tainted
[ 5.995898] ---------------------------------------------
[ 5.995904] modprobe/275 is trying to acquire lock:
[ 5.995909] (&subdev->mutex){+.+.+.}, at: [<ffffffffa00d10b8>] nouveau_instobj_create_+0x48/0x90 [nouveau]
[ 5.995955]
[ 5.995955] but task is already holding lock:
[ 5.995961] (&subdev->mutex){+.+.+.}, at: [<ffffffffa00da3b5>] nv50_disp_data_ctor+0x65/0xd0 [nouveau]
[ 5.995989]
[ 5.995989] other info that might help us debug this:
[ 5.995995] Possible unsafe locking scenario:
[ 5.995995]
[ 5.996001] CPU0
[ 5.996004] ----
[ 5.996005] lock(&subdev->mutex);
[ 5.996005] lock(&subdev->mutex);
[ 5.996005]
[ 5.996005] *** DEADLOCK ***
Regards,
Peter Hurley
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-01-29 14:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-09 11:45 3.8-rc2: lockdep warning in nouveau driver Arend van Spriel
2013-01-29 14:56 ` Peter Hurley
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).