From mboxrd@z Thu Jan 1 00:00:00 1970 From: Inki Dae Subject: [PATCH v2 3/7] drm/exynos: Fix G2D core malfunctioning issue Date: Thu, 14 Mar 2013 18:48:45 +0900 Message-ID: <1363254525-11735-1-git-send-email-inki.dae@samsung.com> References: <1363165441-7448-1-git-send-email-inki.dae@samsung.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mailout1.samsung.com (mailout1.samsung.com [203.254.224.24]) by gabe.freedesktop.org (Postfix) with ESMTP id 8BFE2E5D2F for ; Thu, 14 Mar 2013 02:48:47 -0700 (PDT) Received: from epcpsbgr3.samsung.com (u143.gpu120.samsung.co.kr [203.254.230.143]) by mailout1.samsung.com (Oracle Communications Messaging Server 7u4-24.01 (7.0.4.24.0) 64bit (built Nov 17 2011)) with ESMTP id <0MJN00IP79X7CNS0@mailout1.samsung.com> for dri-devel@lists.freedesktop.org; Thu, 14 Mar 2013 18:48:46 +0900 (KST) In-reply-to: <1363165441-7448-1-git-send-email-inki.dae@samsung.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: dri-devel-bounces+sf-dri-devel=m.gmane.org@lists.freedesktop.org Errors-To: dri-devel-bounces+sf-dri-devel=m.gmane.org@lists.freedesktop.org To: airlied@linux.ie, dri-devel@lists.freedesktop.org Cc: kyungmin.park@samsung.com, sw0312.kim@samsung.com, YoungJun Cho List-Id: dri-devel@lists.freedesktop.org From: YoungJun Cho This patch fixes G2D core malfunctioning issue once g2d dma is started. Without 'DMA_HOLD_CMD_REG' register setting, there is only one interrupt after the execution to all command lists have been completed. And that induces watchdog. So this patch sets 'LIST_HOLD' command to the register so that command execution interrupt can be occured whenever each command list execution is finished. Changelog v2: - Consider for interrupt setup to each command list and all command lists And correct typo. Signed-off-by: YoungJun Cho Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 20 +++++++++++++++----- 1 files changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 095520f..1ff1144 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -82,7 +82,7 @@ #define G2D_DMA_LIST_DONE_COUNT_OFFSET 17 /* G2D_DMA_HOLD_CMD */ -#define G2D_USET_HOLD (1 << 2) +#define G2D_USER_HOLD (1 << 2) #define G2D_LIST_HOLD (1 << 1) #define G2D_BITBLT_HOLD (1 << 0) @@ -592,10 +592,6 @@ static void g2d_dma_start(struct g2d_data *g2d, pm_runtime_get_sync(g2d->dev); clk_enable(g2d->gate_clk); - /* interrupt enable */ - writel_relaxed(G2D_INTEN_ACF | G2D_INTEN_UCF | G2D_INTEN_GCF, - g2d->regs + G2D_INTEN); - writel_relaxed(node->dma_addr, g2d->regs + G2D_DMA_SFR_BASE_ADDR); writel_relaxed(G2D_DMA_START, g2d->regs + G2D_DMA_COMMAND); } @@ -863,9 +859,23 @@ int exynos_g2d_set_cmdlist_ioctl(struct drm_device *drm_dev, void *data, cmdlist->data[cmdlist->last++] = G2D_SRC_BASE_ADDR; cmdlist->data[cmdlist->last++] = 0; + /* + * 'LIST_HOLD' command should be set to the DMA_HOLD_CMD_REG + * and GCF bit should be set to INTEN register if user wants + * G2D interrupt event once current command list execution is + * finished. + * Otherwise only ACF bit should be set to INTEN register so + * that one interrupt is occured after all command lists + * have been completed. + */ if (node->event) { + cmdlist->data[cmdlist->last++] = G2D_INTEN; + cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF | G2D_INTEN_GCF; cmdlist->data[cmdlist->last++] = G2D_DMA_HOLD_CMD; cmdlist->data[cmdlist->last++] = G2D_LIST_HOLD; + } else { + cmdlist->data[cmdlist->last++] = G2D_INTEN; + cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF; } /* Check size of cmdlist: last 2 is about G2D_BITBLT_START */ -- 1.7.4.1