[PATCH V2 0/7] drm/tilcdc: bug fixes, mode selection improvements

[Darren Etheridge <detheridge@ti.com>]

The series of patches that follow are intended to address issues that
have been found in the tilcdc drm driver. The patchset enables support
for screen resolutions with horizontal resolutions greater than 1024
pixels.  The patchset also addresses a limitation where certain
monitor timings would overflow LCD controller timing registers causing
either no monitor signal or a very corrupted display.  This patchset
will stop monitor modes from being reported as valid if the lcd
controller cannot support them.  

V2:
	Fix typos in commit messages
	Add a patch that enables runtime modesetting to work correctly
	Fix an issue where the slave encoder can initialize before the i2c
		subsystem, resulting in no displays being configured.

Applies cleanly on drm-next.

Darren Etheridge (6):
  drm/tilcdc: support pixel widths greater than 1024
  drm/tilcdc: adding some more devicetree config
  drm/tilcdc: fixing off by one errors found on analyzer
  drm/tilcdc: adding more guards to prevent selection of invalid modes
  drm/tilcdc: whitespace fixes and tidyup
  drm/tilcdc fixing i2c/slave initialization race

Pantelis Antoniou (1):
  drm/tilcdc: Clear bits of register we're going to set.

 .../devicetree/bindings/drm/tilcdc/tilcdc.txt      |    8 ++
 drivers/gpu/drm/tilcdc/tilcdc_crtc.c               |  117 +++++++++++++++++--
 drivers/gpu/drm/tilcdc/tilcdc_drv.c                |   25 ++++-
 drivers/gpu/drm/tilcdc/tilcdc_drv.h                |   24 ++++-
 drivers/gpu/drm/tilcdc/tilcdc_regs.h               |    1 +
 drivers/gpu/drm/tilcdc/tilcdc_slave.c              |   53 +++++----
 6 files changed, 189 insertions(+), 39 deletions(-)