dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
To: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>,
	David Airlie <airlied@linux.ie>,
	Darren Etheridge <detheridge@ti.com>,
	Rob Clark <robdclark@gmail.com>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH 4/8] drm/i2c: tda998x: prepare for video input configuration
Date: Tue,  6 Aug 2013 00:20:14 +0200	[thread overview]
Message-ID: <1375741218-10225-5-git-send-email-sebastian.hesselbarth@gmail.com> (raw)
In-Reply-To: <1375741218-10225-1-git-send-email-sebastian.hesselbarth@gmail.com>

From: Russell King <rmk+kernel@arm.linux.org.uk>

The video-input-port (VIP) is highly configurable. This prepares
current driver to allow to configure VIP configuration, as some
boards connect lcd controller and TDA998x "pin-swapped" and depend
on VIP to swap the pins by register configuration.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: David Airlie <airlied@linux.ie>
Cc: Darren Etheridge <detheridge@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/gpu/drm/i2c/tda998x_drv.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index da2917b..d6afd02 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -32,6 +32,9 @@ struct tda998x_priv {
 	uint16_t rev;
 	uint8_t current_page;
 	int dpms;
+	u8 vip_cntrl_0;
+	u8 vip_cntrl_1;
+	u8 vip_cntrl_2;
 };
 
 #define to_tda998x_priv(x)  ((struct tda998x_priv *)to_encoder_slave(x)->slave_priv)
@@ -447,12 +450,9 @@ tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
 		reg_write(encoder, REG_ENA_VP_1, 0xff);
 		reg_write(encoder, REG_ENA_VP_2, 0xff);
 		/* set muxing after enabling ports: */
-		reg_write(encoder, REG_VIP_CNTRL_0,
-				VIP_CNTRL_0_SWAP_A(2) | VIP_CNTRL_0_SWAP_B(3));
-		reg_write(encoder, REG_VIP_CNTRL_1,
-				VIP_CNTRL_1_SWAP_C(0) | VIP_CNTRL_1_SWAP_D(1));
-		reg_write(encoder, REG_VIP_CNTRL_2,
-				VIP_CNTRL_2_SWAP_E(4) | VIP_CNTRL_2_SWAP_F(5));
+		reg_write(encoder, REG_VIP_CNTRL_0, priv->vip_cntrl_0);
+		reg_write(encoder, REG_VIP_CNTRL_1, priv->vip_cntrl_1);
+		reg_write(encoder, REG_VIP_CNTRL_2, priv->vip_cntrl_2);
 		break;
 	case DRM_MODE_DPMS_OFF:
 		/* disable audio and video ports */
@@ -822,6 +822,10 @@ tda998x_encoder_init(struct i2c_client *client,
 	if (!priv)
 		return -ENOMEM;
 
+	priv->vip_cntrl_0 = VIP_CNTRL_0_SWAP_A(2) | VIP_CNTRL_0_SWAP_B(3);
+	priv->vip_cntrl_1 = VIP_CNTRL_1_SWAP_C(0) | VIP_CNTRL_1_SWAP_D(1);
+	priv->vip_cntrl_2 = VIP_CNTRL_2_SWAP_E(4) | VIP_CNTRL_2_SWAP_F(5);
+
 	priv->current_page = 0;
 	priv->cec = i2c_new_dummy(client->adapter, 0x34);
 	priv->dpms = DRM_MODE_DPMS_OFF;
-- 
1.7.10.4

  parent reply	other threads:[~2013-08-05 22:20 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-05 22:20 [PATCH 0/8] Several NXP TDA998x patches Sebastian Hesselbarth
2013-08-05 22:20 ` [PATCH 1/8] drm/i2c: tda998x: fix EDID reading on TDA19988 devices Sebastian Hesselbarth
2013-08-14 12:16   ` Russell King - ARM Linux
2013-08-14 12:32     ` Rob Clark
2013-08-05 22:20 ` [PATCH 2/8] drm/i2c: tda998x: ensure VIP output mux is properly set Sebastian Hesselbarth
2013-08-14 12:15   ` Russell King - ARM Linux
2013-08-05 22:20 ` [PATCH 3/8] drm/i2c: tda998x: fix npix/nline programming Sebastian Hesselbarth
2013-08-05 22:20 ` Sebastian Hesselbarth [this message]
2013-08-05 22:20 ` [PATCH 5/8] drm/i2c: tda998x: add video and audio input configuration Sebastian Hesselbarth
2013-08-14 12:20   ` Russell King - ARM Linux
2013-08-14 14:12   ` Russell King - ARM Linux
2013-08-14 14:34     ` Sebastian Hesselbarth
2013-08-05 22:20 ` [PATCH 6/8] drm/i2c: tda998x: fix sync generation and calculation Sebastian Hesselbarth
2013-08-14 12:41   ` Russell King - ARM Linux
2013-08-14 14:14     ` Sebastian Hesselbarth
2013-08-14 14:35   ` Russell King - ARM Linux
2013-08-05 22:20 ` [PATCH 7/8] drm/i2c: tda998x: prepare for broken sync workaround Sebastian Hesselbarth
2013-08-05 22:20 ` [PATCH 8/8] drm/tilcdc fixup mode to workaound sync for tda998x Sebastian Hesselbarth
2013-08-06 16:26 ` [PATCH 0/8] Several NXP TDA998x patches Etheridge, Darren
2013-08-08 22:08 ` Darren Etheridge

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1375741218-10225-5-git-send-email-sebastian.hesselbarth@gmail.com \
    --to=sebastian.hesselbarth@gmail.com \
    --cc=airlied@linux.ie \
    --cc=daniel.vetter@ffwll.ch \
    --cc=detheridge@ti.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rmk+kernel@arm.linux.org.uk \
    --cc=robdclark@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).