From: Benoit Parrot <bparrot@ti.com>
To: devicetree@vger.kernel.org
Cc: tony@atomide.com, dri-devel@lists.freedesktop.org, bcousson@baylibre.com
Subject: [PATCH v3 1/1] ARM: dts: AM33XX: Add LCDC info into am335x-evm
Date: Fri, 23 Aug 2013 11:13:56 -0500 [thread overview]
Message-ID: <1377274436-3890-1-git-send-email-bparrot@ti.com> (raw)
Add LCDC device node in DT for am33xx
Add LCDC and Panel info in DT for am335x-evm
Changes in v3:
- rebase to 3.11-rc6
Changes in v2:
- remove redundant/unnecessary SoC specific setting in the board dts
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
arch/arm/boot/dts/am335x-evm.dts | 72 ++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/am33xx.dtsi | 9 +++++
2 files changed, 81 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 3aee1a4..b0703f1 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -149,6 +149,40 @@
0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
+
+ lcd_pins_s0: lcd_pins_s0 {
+ pinctrl-single,pins = <
+ 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
+ 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
+ 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
+ 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
+ 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
+ 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
+ 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
+ 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
+ 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0 */
+ 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0 */
+ 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0 */
+ 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0 */
+ 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0 */
+ 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0 */
+ 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0 */
+ 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0 */
+ 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0 */
+ 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0 */
+ 0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT | MODE0 */
+ 0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT | MODE0 */
+ 0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT | MODE0 */
+ 0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT | MODE0 */
+ 0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT | MODE0 */
+ 0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT | MODE0 */
+ 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
+ 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
+ 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
+ 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
+ >;
+ };
+
};
ocp {
@@ -311,6 +345,10 @@
};
};
};
+
+ lcdc: lcdc@4830e000 {
+ status = "okay";
+ };
};
vbat: fixedregulator@0 {
@@ -374,6 +412,40 @@
brightness-levels = <0 51 53 56 62 75 101 152 255>;
default-brightness-level = <8>;
};
+
+ panel {
+ compatible = "ti,tilcdc,panel";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins_s0>;
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <32>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+
+ display-timings {
+ 800x480p62 {
+ clock-frequency = <30000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <39>;
+ hback-porch = <39>;
+ hsync-len = <47>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ vsync-len = <2>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+ };
};
#include "tps65910.dtsi"
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 38b446b..a302fd6 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -530,5 +530,14 @@
#size-cells = <1>;
status = "disabled";
};
+
+ lcdc: lcdc@4830e000 {
+ compatible = "ti,am33xx-tilcdc";
+ reg = <0x4830e000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+ ti,hwmods = "lcdc";
+ status = "disabled";
+ };
};
};
--
1.7.9.5
next reply other threads:[~2013-08-23 16:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-23 16:13 Benoit Parrot [this message]
2013-09-03 14:55 ` [PATCH v3 1/1] ARM: dts: AM33XX: Add LCDC info into am335x-evm Benoit Parrot
2013-09-24 9:29 ` Benoit Cousson
[not found] ` <52415B8F.40804-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2013-09-25 22:31 ` Benoit Parrot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377274436-3890-1-git-send-email-bparrot@ti.com \
--to=bparrot@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox