[PATCH 5/5] ARM: tegra: Add hdmi to Tegra114 Dalmore device tree

[Mikko Perttunen <mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>]

Add hdmi node to Dalmore device tree to supply Dalmore-specific
data: VDD and PLL regulators for HDMI port, DDC bus and HDMI
cable hotplug GPIO.

Signed-off-by: Mikko Perttunen <mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/tegra114-dalmore.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 6023028..50e6fb4 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -713,6 +713,17 @@
 		};
 	};
 
+	host1x {
+		hdmi {
+			status = "okay";
+
+			vdd-supply = <&vdd_hdmi_reg>;
+			pll-supply = <&palmas_smps3_reg>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	serial@70006300 {
 		status = "okay";
 	};
@@ -740,6 +751,10 @@
 		};
 	};
 
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+	};
+
 	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
@@ -1169,6 +1184,8 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
 			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
 			vin-supply = <&tps65090_dcdc1_reg>;
 		};
-- 
1.8.1.5