From: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
To: Greg Kroah-Hartman
<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>
Cc: "Marek Vasut" <marex-ynQEQJNshbs@public.gmane.org>,
devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b@public.gmane.org,
"Denis Carikli" <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>,
"Dan Carpenter"
<dan.carpenter-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>,
"Rob Herring"
<rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
"Pawel Moll" <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
"Mark Rutland" <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
"Stephen Warren"
<swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
"Ian Campbell"
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
driverdev-devel-tBiZLqfeLfOHmIFyCCdPziST3g8Odh+X@public.gmane.org,
"David Airlie" <airlied-cv59FeDIM0c@public.gmane.org>,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
"Sascha Hauer" <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
"Shawn Guo" <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
"Eric Bénard" <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Subject: [PATCHv5][ 5/8] staging: imx-drm: parallel display: add regulator support.
Date: Thu, 5 Dec 2013 19:28:09 +0100 [thread overview]
Message-ID: <1386268092-21719-5-git-send-email-denis@eukrea.com> (raw)
In-Reply-To: <1386268092-21719-1-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Cc: Dan Carpenter <dan.carpenter-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Greg Kroah-Hartman <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>
Cc: driverdev-devel-tBiZLqfeLfOHmIFyCCdPziST3g8Odh+X@public.gmane.org
Cc: David Airlie <airlied-cv59FeDIM0c@public.gmane.org>
Cc: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
---
ChangeLog v3->v5:
- Code clenaup.
ChangeLog v2->v3:
- Added some interested people in the Cc list.
- the lcd-supply is now called display-supply (not all display are LCD).
- The code and documentation was updated accordingly.
- regulator_is_enabled now guard the regulator enables/disables because
regulator_disable does not check the regulator state.
---
.../bindings/staging/imx-drm/fsl-imx-drm.txt | 1 +
drivers/staging/imx-drm/parallel-display.c | 22 ++++++++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
index 2d24425..4dd7ce5 100644
--- a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt
@@ -28,6 +28,7 @@ Required properties:
- compatible: Should be "fsl,imx-parallel-display"
- crtc: the crtc this display is connected to, see below
Optional properties:
+- display-supply : phandle to the regulator device tree node if needed.
- interface_pix_fmt: How this display is connected to the
crtc. Currently supported types: "rgb24", "rgb565", "bgr666", "rgb666"
- edid: verbatim EDID data block describing attached display.
diff --git a/drivers/staging/imx-drm/parallel-display.c b/drivers/staging/imx-drm/parallel-display.c
index 65d0c18..61c0aeb 100644
--- a/drivers/staging/imx-drm/parallel-display.c
+++ b/drivers/staging/imx-drm/parallel-display.c
@@ -22,6 +22,7 @@
#include <drm/drmP.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_crtc_helper.h>
+#include <linux/regulator/consumer.h>
#include <linux/videodev2.h>
#include "imx-drm.h"
@@ -35,6 +36,7 @@ struct imx_parallel_display {
struct drm_encoder encoder;
struct imx_drm_encoder *imx_drm_encoder;
struct device *dev;
+ struct regulator *disp_reg;
void *edid;
int edid_len;
u32 interface_pix_fmt;
@@ -141,6 +143,13 @@ static void imx_pd_encoder_prepare(struct drm_encoder *encoder)
{
struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
+ if (!IS_ERR(imxpd->disp_reg) &&
+ !regulator_is_enabled(imxpd->disp_reg)) {
+ if (regulator_enable(imxpd->disp_reg))
+ dev_err(imxpd->dev,
+ "Failed to enable regulator.\n");
+ }
+
imx_drm_crtc_panel_format(encoder->crtc, DRM_MODE_ENCODER_NONE,
imxpd->interface_pix_fmt);
}
@@ -157,6 +166,12 @@ static void imx_pd_encoder_mode_set(struct drm_encoder *encoder,
static void imx_pd_encoder_disable(struct drm_encoder *encoder)
{
+ struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
+
+ if (!IS_ERR(imxpd->disp_reg) && regulator_is_enabled(imxpd->disp_reg)) {
+ if (regulator_disable(imxpd->disp_reg))
+ dev_err(imxpd->dev, "Failed to disable regulator.\n");
+ }
}
static void imx_pd_encoder_destroy(struct drm_encoder *encoder)
@@ -260,6 +275,13 @@ static int imx_pd_probe(struct platform_device *pdev)
if (ret)
return ret;
+ imxpd->disp_reg = devm_regulator_get(&pdev->dev, "display");
+ if (PTR_ERR(imxpd->disp_reg) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ if (IS_ERR(imxpd->disp_reg))
+ dev_dbg(&pdev->dev, "Operating without display regulator.\n");
+
ret = imx_drm_encoder_add_possible_crtcs(imxpd->imx_drm_encoder, np);
platform_set_drvdata(pdev, imxpd);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-12-05 18:28 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-05 18:28 [PATCHv5][ 1/8] [media] v4l2: add new V4L2_PIX_FMT_RGB666 pixel format Denis Carikli
[not found] ` <1386268092-21719-1-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-12-05 18:28 ` [PATCHv5][ 2/8] staging: imx-drm: Add RGB666 support for parallel display Denis Carikli
2013-12-06 13:14 ` Thierry Reding
2013-12-06 13:29 ` Lucas Stach
2013-12-06 14:16 ` Thierry Reding
2013-12-05 18:28 ` [PATCHv5][ 3/8] staging: imx-drm: Correct BGR666 and the board's dts that use them Denis Carikli
2013-12-05 20:52 ` Marek Vasut
2013-12-06 13:07 ` Thierry Reding
2013-12-05 18:28 ` Denis Carikli [this message]
2013-12-05 20:55 ` [PATCHv5][ 5/8] staging: imx-drm: parallel display: add regulator support Marek Vasut
2013-12-06 13:23 ` Thierry Reding
2013-12-05 18:28 ` [PATCHv5][ 4/8] staging: imx-drm: Use de-active and pixelclk-active display-timings Denis Carikli
2013-12-05 20:54 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386268092-21719-5-git-send-email-denis@eukrea.com \
--to=denis-fo0siakyzcbqt0dzr+alfa@public.gmane.org \
--cc=airlied-cv59FeDIM0c@public.gmane.org \
--cc=dan.carpenter-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org \
--cc=devel-gWbeCf7V1WCQmaza687I9mD2FQJk+8+b@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=driverdev-devel-tBiZLqfeLfOHmIFyCCdPziST3g8Odh+X@public.gmane.org \
--cc=eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=marex-ynQEQJNshbs@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox