From: Alex Deucher <alexdeucher@gmail.com>
To: dri-devel@lists.freedesktop.org, deathsimple@vodafone.de
Cc: Alex Deucher <alexander.deucher@amd.com>
Subject: [PATCH] drm/radeon: add a i2c bus mutex
Date: Thu, 8 May 2014 10:58:04 -0400 [thread overview]
Message-ID: <1399561084-2017-1-git-send-email-alexander.deucher@amd.com> (raw)
The i2c and aux buses use the same pads so add
a mutex to protect access to the pads.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
drivers/gpu/drm/radeon/atombios_dp.c | 18 ++++++++++++++----
drivers/gpu/drm/radeon/atombios_i2c.c | 17 +++++++++++++----
drivers/gpu/drm/radeon/radeon_i2c.c | 9 +++++++++
drivers/gpu/drm/radeon/radeon_mode.h | 1 +
4 files changed, 37 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 54e4f52..3bb0933 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -95,9 +95,12 @@ static int radeon_process_aux_ch(struct radeon_i2c_chan *chan,
int index = GetIndexIntoMasterTable(COMMAND, ProcessAuxChannelTransaction);
unsigned char *base;
int recv_bytes;
+ int r = 0;
memset(&args, 0, sizeof(args));
+ mutex_lock(&chan->mutex);
+
base = (unsigned char *)(rdev->mode_info.atom_context->scratch + 1);
radeon_atom_copy_swap(base, send, send_bytes, true);
@@ -117,19 +120,22 @@ static int radeon_process_aux_ch(struct radeon_i2c_chan *chan,
/* timeout */
if (args.v1.ucReplyStatus == 1) {
DRM_DEBUG_KMS("dp_aux_ch timeout\n");
- return -ETIMEDOUT;
+ r = -ETIMEDOUT;
+ goto done;
}
/* flags not zero */
if (args.v1.ucReplyStatus == 2) {
DRM_DEBUG_KMS("dp_aux_ch flags not zero\n");
- return -EBUSY;
+ r = -EBUSY;
+ goto done;
}
/* error */
if (args.v1.ucReplyStatus == 3) {
DRM_DEBUG_KMS("dp_aux_ch error\n");
- return -EIO;
+ r = -EIO;
+ goto done;
}
recv_bytes = args.v1.ucDataOutLen;
@@ -139,7 +145,11 @@ static int radeon_process_aux_ch(struct radeon_i2c_chan *chan,
if (recv && recv_size)
radeon_atom_copy_swap(recv, base + 16, recv_bytes, false);
- return recv_bytes;
+ r = recv_bytes;
+done:
+ mutex_unlock(&chan->mutex);
+
+ return r;
}
#define BARE_ADDRESS_SIZE 3
diff --git a/drivers/gpu/drm/radeon/atombios_i2c.c b/drivers/gpu/drm/radeon/atombios_i2c.c
index b5162c3..9c570fb 100644
--- a/drivers/gpu/drm/radeon/atombios_i2c.c
+++ b/drivers/gpu/drm/radeon/atombios_i2c.c
@@ -43,15 +43,19 @@ static int radeon_process_i2c_ch(struct radeon_i2c_chan *chan,
int index = GetIndexIntoMasterTable(COMMAND, ProcessI2cChannelTransaction);
unsigned char *base;
u16 out = cpu_to_le16(0);
+ int r = 0;
memset(&args, 0, sizeof(args));
+ mutex_lock(&chan->mutex);
+
base = (unsigned char *)rdev->mode_info.atom_context->scratch;
if (flags & HW_I2C_WRITE) {
if (num > ATOM_MAX_HW_I2C_WRITE) {
DRM_ERROR("hw i2c: tried to write too many bytes (%d vs 3)\n", num);
- return -EINVAL;
+ r = -EINVAL;
+ goto done;
}
if (buf == NULL)
args.ucRegIndex = 0;
@@ -65,7 +69,8 @@ static int radeon_process_i2c_ch(struct radeon_i2c_chan *chan,
} else {
if (num > ATOM_MAX_HW_I2C_READ) {
DRM_ERROR("hw i2c: tried to read too many bytes (%d vs 255)\n", num);
- return -EINVAL;
+ r = -EINVAL;
+ goto done;
}
args.ucRegIndex = 0;
args.lpI2CDataOut = 0;
@@ -82,13 +87,17 @@ static int radeon_process_i2c_ch(struct radeon_i2c_chan *chan,
/* error */
if (args.ucStatus != HW_ASSISTED_I2C_STATUS_SUCCESS) {
DRM_DEBUG_KMS("hw_i2c error\n");
- return -EIO;
+ r = -EIO;
+ goto done;
}
if (!(flags & HW_I2C_WRITE))
radeon_atom_copy_swap(buf, base, num, false);
- return 0;
+done:
+ mutex_unlock(&chan->mutex);
+
+ return r;
}
int radeon_atom_hw_i2c_xfer(struct i2c_adapter *i2c_adap,
diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c
index 7b94414..427ee4d 100644
--- a/drivers/gpu/drm/radeon/radeon_i2c.c
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -94,6 +94,8 @@ static int pre_xfer(struct i2c_adapter *i2c_adap)
struct radeon_i2c_bus_rec *rec = &i2c->rec;
uint32_t temp;
+ mutex_lock(&i2c->mutex);
+
/* RV410 appears to have a bug where the hw i2c in reset
* holds the i2c port in a bad state - switch hw i2c away before
* doing DDC - do this for all r200s/r300s/r400s for safety sake
@@ -170,6 +172,8 @@ static void post_xfer(struct i2c_adapter *i2c_adap)
temp = RREG32(rec->mask_data_reg) & ~rec->mask_data_mask;
WREG32(rec->mask_data_reg, temp);
temp = RREG32(rec->mask_data_reg);
+
+ mutex_unlock(&i2c->mutex);
}
static int get_clock(void *i2c_priv)
@@ -813,6 +817,8 @@ static int radeon_hw_i2c_xfer(struct i2c_adapter *i2c_adap,
struct radeon_i2c_bus_rec *rec = &i2c->rec;
int ret = 0;
+ mutex_lock(&i2c->mutex);
+
switch (rdev->family) {
case CHIP_R100:
case CHIP_RV100:
@@ -879,6 +885,8 @@ static int radeon_hw_i2c_xfer(struct i2c_adapter *i2c_adap,
break;
}
+ mutex_unlock(&i2c->mutex);
+
return ret;
}
@@ -919,6 +927,7 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
i2c->adapter.dev.parent = &dev->pdev->dev;
i2c->dev = dev;
i2c_set_adapdata(&i2c->adapter, i2c);
+ mutex_init(&i2c->mutex);
if (rec->mm_i2c ||
(rec->hw_capable &&
radeon_hw_i2c &&
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 6ddf31a..b265a8b 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -191,6 +191,7 @@ struct radeon_i2c_chan {
struct radeon_i2c_bus_rec rec;
struct drm_dp_aux aux;
bool has_aux;
+ struct mutex mutex;
};
/* mostly for macs, but really any system without connector tables */
--
1.8.3.1
next reply other threads:[~2014-05-08 14:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-08 14:58 Alex Deucher [this message]
2014-05-12 13:24 ` [PATCH] drm/radeon: add a i2c bus mutex Christian König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399561084-2017-1-git-send-email-alexander.deucher@amd.com \
--to=alexdeucher@gmail.com \
--cc=alexander.deucher@amd.com \
--cc=deathsimple@vodafone.de \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox