[deathsimple/drm-next-3.16][PATCH V3 2/4] drm/radeon/hdmi: DCE3: clean ACR control

From: "Rafał Miłecki" <zajec5@gmail.com>
To: dri-devel@lists.freedesktop.org,
	"Christian König" <deathsimple@vodafone.de>
Subject: [deathsimple/drm-next-3.16][PATCH V3 2/4] drm/radeon/hdmi: DCE3: clean ACR control
Date: Fri, 16 May 2014 11:10:29 +0200	[thread overview]
Message-ID: <1400231431-4844-2-git-send-email-zajec5@gmail.com> (raw)
In-Reply-To: <1400231431-4844-1-git-send-email-zajec5@gmail.com>

What initially seemed to be a typo in fglrx (using register 0x740c
instead of 0x74dc) appeared to be a correct behavior. DCE3 has ACR and
CRC registers swapped which explains why we needed
WREG32(HDMI0_AUDIO_CRC_CONTROL + offset, 0x1000);

This has been tested for possible regressions on DCE3 HD3470 (RV620).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
V2: Use defines for swapped regs, update commit message.
---
 drivers/gpu/drm/radeon/r600_hdmi.c | 8 +++++---
 drivers/gpu/drm/radeon/r600d.h     | 2 ++
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index b8b2efa..a828222e 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -332,6 +332,7 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod
 	u8 buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE];
 	struct hdmi_avi_infoframe frame;
 	uint32_t offset;
+	uint32_t acr_ctl;
 	ssize_t err;
 
 	if (!dig || !dig->afmt)
@@ -351,15 +352,16 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod
 	WREG32(HDMI0_VBI_PACKET_CONTROL + offset,
 	       HDMI0_NULL_SEND); /* send null packets when required */
 
-	WREG32(HDMI0_AUDIO_CRC_CONTROL + offset, 0x1000);
-
 	WREG32(HDMI0_AUDIO_PACKET_CONTROL + offset,
 	       HDMI0_AUDIO_SAMPLE_SEND | /* send audio packets */
 	       HDMI0_AUDIO_DELAY_EN(1) | /* default audio delay */
 	       HDMI0_AUDIO_PACKETS_PER_LINE(3) | /* should be suffient for all audio modes and small enough for all hblanks */
 	       HDMI0_60958_CS_UPDATE); /* allow 60958 channel status fields to be updated */
 
-	WREG32(HDMI0_ACR_PACKET_CONTROL + offset,
+	/* DCE 3.0 uses register that's normally for CRC_CONTROL */
+	acr_ctl = ASIC_IS_DCE3(rdev) ? DCE3_HDMI0_ACR_PACKET_CONTROL :
+				       HDMI0_ACR_PACKET_CONTROL;
+	WREG32(acr_ctl + offset,
 	       HDMI0_ACR_SOURCE | /* select SW CTS value - XXX verify that hw CTS works on all families */
 	       HDMI0_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */
 
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index 37455f6..10380c5 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -1038,6 +1038,7 @@
 #       define HDMI0_AZ_FORMAT_WTRIG_ACK   (1 << 29)
 #define HDMI0_AUDIO_CRC_CONTROL      0x740c
 #       define HDMI0_AUDIO_CRC_EN    (1 << 0)
+#define DCE3_HDMI0_ACR_PACKET_CONTROL	0x740c
 #define HDMI0_VBI_PACKET_CONTROL     0x7410
 #       define HDMI0_NULL_SEND       (1 << 0)
 #       define HDMI0_GC_SEND         (1 << 4)
@@ -1166,6 +1167,7 @@
 #       define HDMI0_ACR_48          3
 #       define HDMI0_ACR_SOURCE      (1 << 8) /* 0 - hw; 1 - cts value */
 #       define HDMI0_ACR_AUTO_SEND   (1 << 12)
+#define DCE3_HDMI0_AUDIO_CRC_CONTROL	0x74dc
 #define HDMI0_RAMP_CONTROL0          0x74e0
 #       define HDMI0_RAMP_MAX_COUNT(x)   (((x) & 0xffffff) << 0)
 #define HDMI0_RAMP_CONTROL1          0x74e4
-- 
1.8.4.5

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
