From mboxrd@z Thu Jan  1 00:00:00 1970
From: Scott Wood <scottwood@freescale.com>
Subject: Re: [PATCH 2/3] arm/dts/ls1021a: Add DCU dts node
Date: Fri, 13 Feb 2015 11:28:08 -0600
Message-ID: <1423848488.4107.5.camel@aoeu.buserror.net>
References: <1423825436-47780-1-git-send-email-b52261@freescale.com>
	 <1423825436-47780-2-git-send-email-b52261@freescale.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 7bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <1423825436-47780-2-git-send-email-b52261@freescale.com>
Sender: linux-kernel-owner@vger.kernel.org
To: Jianwei Wang <b52261@freescale.com>
Cc: dri-devel@lists.freedesktop.org, jbarnes@virtuousgeek.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Alison Wang <b18965@freescale.com>, Xiubo Li <lixiubo@cmss.chinamobile.com>
List-Id: dri-devel@lists.freedesktop.org

On Fri, 2015-02-13 at 19:03 +0800, Jianwei Wang wrote:
> Add DCU node, DCU is a display controller of Freescale
> named 2D-ACE.
> 
> Signed-off-by: Alison Wang <b18965@freescale.com>
> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
> Signed-off-by: Jianwei Wang <b52261@freescale.com>
> ---
>  arch/arm/boot/dts/ls1021a.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index c70bb27..28c37f1 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -383,6 +383,17 @@
>  				 <&platform_clk 1>;
>  		};
>  
> +		dcfb: dcfb@2ce0000 {
> +			compatible = "fsl,ls1021a-dcfb";
> +			reg = <0x0 0x2ce0000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&platform_clk 0>;
> +			clock-names = "dcfb";
> +			scfg-controller = <&scfg>;
> +			big-endian;
> +			status = "disabled";
> +		};

I don't see "big-endian" in the dcfb binding.

-Scott