Re: [PATCH] drm/imx: ipuv3-crtc: Allow to divide DI clock from TVEv2

[Philipp Zabel <p.zabel@pengutronix.de>]

Am Montag, den 02.03.2015, 16:40 +0100 schrieb Lucas Stach:
> Am Montag, den 02.03.2015, 16:24 +0100 schrieb Philipp Zabel:
> > This patch allows the IPU to divide the 27 MHz input clock from
> > the TVE by two to obtain the 13.5 MHz pixel clock needed for
> > NTSC/PAL SD modes.
> > 
> > Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> > ---
> >  drivers/gpu/drm/imx/ipuv3-crtc.c | 7 +++++--
> >  1 file changed, 5 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c
> > index 35a3375..11a8d868 100644
> > --- a/drivers/gpu/drm/imx/ipuv3-crtc.c
> > +++ b/drivers/gpu/drm/imx/ipuv3-crtc.c
> > @@ -161,13 +161,16 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc,
> >  		__func__, encoder_types);
> >  
> >  	/*
> > -	 * If we have DAC, TVDAC or LDB, then we need the IPU DI clock
> > -	 * to be the same as the LDB DI clock.
> > +	 * If we have DAC or LDB, then we need the IPU DI clock to be
> > +	 * the same as the LDB DI clock. For TVDAC, derive the IPU DI
> > +	 * clock from 27 MHz TVE_DI clock, but allow to divide it.
> >  	 */
> >  	if (encoder_types & (BIT(DRM_MODE_ENCODER_DAC) |
> >  			     BIT(DRM_MODE_ENCODER_TVDAC) |
> 
> I suppose the above line has to be removed for this to work properly.

You are right. I'll fix that.

> >  			     BIT(DRM_MODE_ENCODER_LVDS)))
> >  		sig_cfg.clkflags = IPU_DI_CLKMODE_SYNC | IPU_DI_CLKMODE_EXT;
> > +	else if (encoder_types & BIT(DRM_MODE_ENCODER_TVDAC))
> > +		sig_cfg.clkflags = IPU_DI_CLKMODE_EXT;
> >  	else
> >  		sig_cfg.clkflags = 0;
> >  

thanks
Philipp

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel