dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Rob Clark <robdclark@gmail.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Subject: [PATCH 1/3] drm/msm: split out vram initialization
Date: Tue,  3 Mar 2015 15:04:24 -0500	[thread overview]
Message-ID: <1425413066-20757-1-git-send-email-robdclark@gmail.com> (raw)

We'll want to extend this a bit to handle also a reserved-memory
("stolen") region, so that drm/msm can take-over bootloader splash
screen.  First split it out into it's own fxn to reduce noise in
the following patch.

Signed-off-by: Rob Clark <robdclark@gmail.com>
---
 drivers/gpu/drm/msm/msm_drv.c | 58 +++++++++++++++++++++++++------------------
 1 file changed, 34 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index a426911..b250610 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -182,29 +182,9 @@ static int get_mdp_ver(struct platform_device *pdev)
 	return 4;
 }
 
-static int msm_load(struct drm_device *dev, unsigned long flags)
+static int msm_init_vram(struct drm_device *dev)
 {
-	struct platform_device *pdev = dev->platformdev;
-	struct msm_drm_private *priv;
-	struct msm_kms *kms;
-	int ret;
-
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (!priv) {
-		dev_err(dev->dev, "failed to allocate private data\n");
-		return -ENOMEM;
-	}
-
-	dev->dev_private = priv;
-
-	priv->wq = alloc_ordered_workqueue("msm", 0);
-	init_waitqueue_head(&priv->fence_event);
-	init_waitqueue_head(&priv->pending_crtcs_event);
-
-	INIT_LIST_HEAD(&priv->inactive_list);
-	INIT_LIST_HEAD(&priv->fence_cbs);
-
-	drm_mode_config_init(dev);
+	struct msm_drm_private *priv = dev->dev_private;
 
 	/* if we have no IOMMU, then we need to use carveout allocator.
 	 * Grab the entire CMA chunk carved out in early startup in
@@ -232,8 +212,7 @@ static int msm_load(struct drm_device *dev, unsigned long flags)
 		if (!p) {
 			dev_err(dev->dev, "failed to allocate VRAM\n");
 			priv->vram.paddr = 0;
-			ret = -ENOMEM;
-			goto fail;
+			return -ENOMEM;
 		}
 
 		dev_info(dev->dev, "VRAM: %08x->%08x\n",
@@ -241,6 +220,37 @@ static int msm_load(struct drm_device *dev, unsigned long flags)
 				(uint32_t)(priv->vram.paddr + size));
 	}
 
+	return 0;
+}
+
+static int msm_load(struct drm_device *dev, unsigned long flags)
+{
+	struct platform_device *pdev = dev->platformdev;
+	struct msm_drm_private *priv;
+	struct msm_kms *kms;
+	int ret;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(dev->dev, "failed to allocate private data\n");
+		return -ENOMEM;
+	}
+
+	dev->dev_private = priv;
+
+	priv->wq = alloc_ordered_workqueue("msm", 0);
+	init_waitqueue_head(&priv->fence_event);
+	init_waitqueue_head(&priv->pending_crtcs_event);
+
+	INIT_LIST_HEAD(&priv->inactive_list);
+	INIT_LIST_HEAD(&priv->fence_cbs);
+
+	drm_mode_config_init(dev);
+
+	ret = msm_init_vram(dev);
+	if (ret)
+		goto fail;
+
 	platform_set_drvdata(pdev, dev);
 
 	/* Bind all our sub-components: */
-- 
2.1.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2015-03-03 20:04 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-03 20:04 Rob Clark [this message]
2015-03-03 20:04 ` [PATCH 2/3] drm/msm: add support for "stolen" mem Rob Clark
2015-03-03 20:04 ` [PATCH 3/3] RFC: dts: ifc6410: add splash screen carveout Rob Clark
2015-03-04 23:10   ` Emil Velikov
2015-03-04 23:19     ` Rob Clark
2015-03-05 14:30       ` Emil Velikov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1425413066-20757-1-git-send-email-robdclark@gmail.com \
    --to=robdclark@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).