From: David Herrmann <dh.herrmann@gmail.com>
To: dri-devel@lists.freedesktop.org
Subject: [PATCH 3/5] drm: cleanup drm_core_{init,exit}()
Date: Wed, 9 Sep 2015 14:21:31 +0200 [thread overview]
Message-ID: <1441801293-1440-4-git-send-email-dh.herrmann@gmail.com> (raw)
In-Reply-To: <1441801293-1440-1-git-send-email-dh.herrmann@gmail.com>
Various cleanups to the DRM core initialization and exit handlers:
- Register chrdev last: Once register_chrdev() returns, open() will
succeed on the given chrdevs. This is usually not an issue, as no
chardevs are registered, yet. However, nodes can be created by
user-space via mknod(2), even though such major/minor combinations are
unknown to the kernel. Avoid calling into drm_stub_open() in those
cases.
Again, drm_stub_open() would just bail out as the inode is unknown,
but it's really non-obvious if you hack on drm_stub_open().
- Unify error-paths into just one label. All the error-path helpers can
be called even though the constructors were not called yet, or failed.
Hence, just call all cleanups unconditionally.
- Call into drm_global_release(). This is a no-op, but provides
debugging helpers in case there're GLOBALS left on module unload. This
function was unused until now.
- Use DRM_ERROR() instead of printk(), and also print the error-code on
failure (even if it is static!).
- Don't throw away error-codes of register_chrdev()!
- Don't hardcode -1 as errno. This is just plain wrong.
- Order exit-handlers in the exact reverse order of initialization
(except if the order actually matters for syncing-reasons, which is
not the case here, though).
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
---
drivers/gpu/drm/drm_drv.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 58299f7..bf2924b 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -829,50 +829,50 @@ static const struct file_operations drm_stub_fops = {
static int __init drm_core_init(void)
{
- int ret = -ENOMEM;
+ int ret;
drm_global_init();
drm_connector_ida_init();
idr_init(&drm_minors_idr);
- if (register_chrdev(DRM_MAJOR, "drm", &drm_stub_fops))
- goto err_p1;
-
ret = drm_sysfs_init();
if (ret < 0) {
- printk(KERN_ERR "DRM: Error creating drm class.\n");
- goto err_p2;
+ DRM_ERROR("Cannot create DRM class: %d\n", ret);
+ goto error;
}
drm_debugfs_root = debugfs_create_dir("dri", NULL);
if (!drm_debugfs_root) {
- DRM_ERROR("Cannot create /sys/kernel/debug/dri\n");
- ret = -1;
- goto err_p3;
+ ret = -ENOMEM;
+ DRM_ERROR("Cannot create debugfs-root: %d\n", ret);
+ goto error;
}
+ ret = register_chrdev(DRM_MAJOR, "drm", &drm_stub_fops);
+ if (ret < 0)
+ goto error;
+
DRM_INFO("Initialized %s %d.%d.%d %s\n",
CORE_NAME, CORE_MAJOR, CORE_MINOR, CORE_PATCHLEVEL, CORE_DATE);
return 0;
-err_p3:
- drm_sysfs_destroy();
-err_p2:
- unregister_chrdev(DRM_MAJOR, "drm");
+error:
+ debugfs_remove(drm_debugfs_root);
+ drm_sysfs_destroy();
idr_destroy(&drm_minors_idr);
-err_p1:
+ drm_connector_ida_destroy();
+ drm_global_release();
return ret;
}
static void __exit drm_core_exit(void)
{
+ unregister_chrdev(DRM_MAJOR, "drm");
debugfs_remove(drm_debugfs_root);
drm_sysfs_destroy();
-
- unregister_chrdev(DRM_MAJOR, "drm");
-
- drm_connector_ida_destroy();
idr_destroy(&drm_minors_idr);
+ drm_connector_ida_destroy();
+ drm_global_release();
}
module_init(drm_core_init);
--
2.5.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-09-09 12:21 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-09 12:21 [PATCH 0/5] DRM Cleanups David Herrmann
2015-09-09 12:21 ` [PATCH 1/5] drm: simplify drm_sysfs_destroy() via IS_ERR_OR_NULL() David Herrmann
2015-09-09 12:21 ` [PATCH 2/5] drm: move drm_class into drm_sysfs.c David Herrmann
2015-09-09 13:16 ` Daniel Vetter
2015-09-09 12:21 ` David Herrmann [this message]
2015-09-09 13:11 ` [PATCH 3/5] drm: cleanup drm_core_{init,exit}() Daniel Vetter
2015-09-09 13:19 ` David Herrmann
2015-09-09 12:21 ` [PATCH 4/5] drm: drop obsolete drm_core.h David Herrmann
2015-09-09 12:21 ` [PATCH 5/5] drm: allocate kernel mode-object IDs in cyclic fashion David Herrmann
2015-09-09 13:03 ` Daniel Vetter
2015-09-11 9:47 ` David Herrmann
2015-09-11 12:14 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441801293-1440-4-git-send-email-dh.herrmann@gmail.com \
--to=dh.herrmann@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox