From: Stefan Agner <stefan@agner.ch>
To: airlied@linux.ie, daniel.vetter@ffwll.ch, jianwei.wang.chn@gmail.com
Cc: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
alison.wang@freescale.com
Subject: [PATCH 7/7] drm/fsl-dcu: use mode flags for hsync/vsync pixelclk polarity
Date: Wed, 18 Nov 2015 18:42:50 -0800 [thread overview]
Message-ID: <1447900970-15936-8-git-send-email-stefan@agner.ch> (raw)
In-Reply-To: <1447900970-15936-1-git-send-email-stefan@agner.ch>
The current default configuration is as follows:
- Display samples data on the falling edge
- Invert VSYNC signal (active LOW)
- Invert HSYNC signal (active LOW)
The mode flags allow to specify the required polarity per
display. Furthermore, none of the current driver settings is
actually a standard polarity.
This patch applies the current driver standard polarities as
explicit flags to the display which has been introduced with
the driver (NEC WQVGA "nec,nl4827hc19-05b"). The driver now
also parses the flags field and applies the configuration
accordingly, by using the following values as defaults (e.g.
if no flags are specified):
- Display samples data on the rising edge
- VSYNC signal not inverted (active HIGH)
- HSYNC signal not inverted (active HIGH)
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 16 +++++++++++++---
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 4 ++--
drivers/gpu/drm/panel/panel-simple.c | 2 ++
3 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
index b2f56e4..db69725 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c
@@ -18,6 +18,8 @@
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
+#include <video/display_timing.h>
+
#include "fsl_dcu_drm_crtc.h"
#include "fsl_dcu_drm_drv.h"
#include "fsl_dcu_drm_plane.h"
@@ -74,7 +76,7 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
struct drm_device *dev = crtc->dev;
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
struct drm_display_mode *mode = &crtc->state->mode;
- unsigned int hbp, hfp, hsw, vbp, vfp, vsw, div, index;
+ unsigned int hbp, hfp, hsw, vbp, vfp, vsw, div, index, pol = 0;
unsigned long dcuclk;
index = drm_crtc_index(crtc);
@@ -89,6 +91,15 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
vfp = mode->vsync_start - mode->vdisplay;
vsw = mode->vsync_end - mode->vsync_start;
+ if (!(mode->flags & DISPLAY_FLAGS_PIXDATA_POSEDGE))
+ pol |= DCU_SYN_POL_INV_PXCK_FALL;
+
+ if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+ pol |= DCU_SYN_POL_INV_HS_LOW;
+
+ if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+ pol |= DCU_SYN_POL_INV_VS_LOW;
+
regmap_write(fsl_dev->regmap, DCU_HSYN_PARA,
DCU_HSYN_PARA_BP(hbp) |
DCU_HSYN_PARA_PW(hsw) |
@@ -101,8 +112,7 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
DCU_DISP_SIZE_DELTA_Y(mode->vdisplay) |
DCU_DISP_SIZE_DELTA_X(mode->hdisplay));
regmap_write(fsl_dev->regmap, DCU_DIV_RATIO, div);
- regmap_write(fsl_dev->regmap, DCU_SYN_POL,
- DCU_SYN_POL_INV_VS_LOW | DCU_SYN_POL_INV_HS_LOW);
+ regmap_write(fsl_dev->regmap, DCU_SYN_POL, pol);
regmap_write(fsl_dev->regmap, DCU_BGND, DCU_BGND_R(0) |
DCU_BGND_G(0) | DCU_BGND_B(0));
regmap_write(fsl_dev->regmap, DCU_DCU_MODE,
diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
index 6413ac9..2a724f3 100644
--- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
+++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
@@ -47,8 +47,8 @@
#define DCU_VSYN_PARA_FP(x) (x)
#define DCU_SYN_POL 0x0024
-#define DCU_SYN_POL_INV_PXCK_FALL (0 << 6)
-#define DCU_SYN_POL_NEG_REMAIN (0 << 5)
+#define DCU_SYN_POL_INV_PXCK_FALL BIT(6)
+#define DCU_SYN_POL_NEG_REMAIN BIT(5)
#define DCU_SYN_POL_INV_VS_LOW BIT(1)
#define DCU_SYN_POL_INV_HS_LOW BIT(0)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index f97b73e..fa68b56 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -960,6 +960,8 @@ static const struct drm_display_mode nec_nl4827hc19_05b_mode = {
.vsync_end = 272 + 2 + 4,
.vtotal = 272 + 2 + 4 + 2,
.vrefresh = 74,
+ .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC |
+ DISPLAY_FLAGS_PIXDATA_POSEDGE,
};
static const struct panel_desc nec_nl4827hc19_05b = {
--
2.6.2
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-11-19 2:42 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-19 2:42 [PATCH 0/7] drm/fsl-dcu: fixes and enhancements Stefan Agner
2015-11-19 2:42 ` [PATCH 1/7] drm/fsl-dcu: specify volatile registers Stefan Agner
2015-11-19 2:42 ` [PATCH 2/7] drm/fsl-dcu: remove regmap return value checks Stefan Agner
2015-11-19 2:42 ` [PATCH 3/7] drm/fsl-dcu: avoid memory leak on errors Stefan Agner
2015-11-19 2:42 ` [PATCH 4/7] drm/fsl-dcu: handle initialization errors properly Stefan Agner
2015-11-19 2:42 ` [PATCH 5/7] drm/fsl-dcu: mask all interrupts on initialization Stefan Agner
2015-11-19 2:42 ` [PATCH 6/7] drm/fsl-dcu: fix alpha blending Stefan Agner
2015-11-19 2:42 ` Stefan Agner [this message]
2016-01-28 2:46 ` [PATCH 7/7] drm/fsl-dcu: use mode flags for hsync/vsync pixelclk polarity Stefan Agner
2016-02-03 14:00 ` Thierry Reding
2016-02-03 23:18 ` Stefan Agner
2016-02-04 20:31 ` Stefan Agner
2016-02-03 14:04 ` Thierry Reding
2016-02-03 23:30 ` Stefan Agner
2016-02-25 23:36 ` [PATCH 0/7] drm/fsl-dcu: fixes and enhancements Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447900970-15936-8-git-send-email-stefan@agner.ch \
--to=stefan@agner.ch \
--cc=airlied@linux.ie \
--cc=alison.wang@freescale.com \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=jianwei.wang.chn@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).