dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Subject: [PATCH v3 4/7] drm/atomic: Handle encoder stealing from set_config better.
Date: Thu,  3 Mar 2016 10:17:39 +0100	[thread overview]
Message-ID: <1456996662-8704-5-git-send-email-maarten.lankhorst@linux.intel.com> (raw)
In-Reply-To: <1456996662-8704-1-git-send-email-maarten.lankhorst@linux.intel.com>

Instead of failing with -EINVAL when conflicting encoders are found,
the legacy set_config will disable other connectors when encoders
conflict.

With the previous commit this becomes a lot easier to implement.
set_config only adds connectors to the state that are modified,
and because of the previous commit that calls add_affected_connectors
only on set->crtc it means any connector not part of the modeset can
be stolen from. We disable the connector in that case, and possibly
the crtc if required.

Atomic modeset itself still doesn't allow encoder stealing, the results
would be too unpredictable.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
 drivers/gpu/drm/drm_atomic_helper.c | 69 +++++++++++++++++++++++++++++++++++++
 include/drm/drm_crtc.h              |  2 ++
 2 files changed, 71 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 72ca85b32260..db11c2f9b098 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -86,6 +86,68 @@ drm_atomic_helper_plane_changed(struct drm_atomic_state *state,
 	}
 }
 
+static int disable_conflicting_connectors(struct drm_atomic_state *state)
+{
+	struct drm_connector_state *conn_state;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	unsigned encoder_mask = 0;
+	int i, ret;
+
+	for_each_connector_in_state(state, connector, conn_state, i) {
+		const struct drm_connector_helper_funcs *funcs = connector->helper_private;
+		struct drm_encoder *new_encoder;
+
+		if (!conn_state->crtc)
+			continue;
+
+		if (funcs->atomic_best_encoder)
+			new_encoder = funcs->atomic_best_encoder(connector, conn_state);
+		else
+			new_encoder = funcs->best_encoder(connector);
+
+		if (new_encoder)
+			encoder_mask |= 1 << drm_encoder_index(new_encoder);
+	}
+
+	drm_for_each_connector(connector, state->dev) {
+		struct drm_crtc_state *crtc_state;
+
+		if (drm_atomic_get_existing_connector_state(state, connector))
+			continue;
+
+		encoder = connector->state->best_encoder;
+		if (!encoder || !(encoder_mask & (1 << drm_encoder_index(encoder))))
+			continue;
+
+		conn_state = drm_atomic_get_connector_state(state, connector);
+		if (IS_ERR(conn_state))
+			return PTR_ERR(conn_state);
+
+		DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] in use on [CRTC:%d:%s], disabling [CONNECTOR:%d:%s]\n",
+				 encoder->base.id, encoder->name,
+				 conn_state->crtc->base.id, conn_state->crtc->name,
+				 connector->base.id, connector->name);
+
+		crtc_state = drm_atomic_get_existing_crtc_state(state, conn_state->crtc);
+
+		ret = drm_atomic_set_crtc_for_connector(conn_state, NULL);
+		if (ret)
+			return ret;
+
+		if (!crtc_state->connector_mask) {
+			ret = drm_atomic_set_mode_prop_for_crtc(crtc_state,
+								NULL);
+			if (ret < 0)
+				return ret;
+
+			crtc_state->active = false;
+		}
+	}
+
+	return 0;
+}
+
 static bool
 check_pending_encoder_assignment(struct drm_atomic_state *state,
 				 struct drm_encoder *new_encoder)
@@ -448,6 +510,12 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,
 		}
 	}
 
+	if (state->legacy_set_config) {
+		ret = disable_conflicting_connectors(state);
+		if (ret)
+			return ret;
+	}
+
 	for_each_connector_in_state(state, connector, connector_state, i) {
 		/*
 		 * This only sets crtc->mode_changed for routing changes,
@@ -1796,6 +1864,7 @@ int drm_atomic_helper_set_config(struct drm_mode_set *set)
 	if (!state)
 		return -ENOMEM;
 
+	state->legacy_set_config = true;
 	state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
 retry:
 	ret = __drm_atomic_helper_set_config(set, state);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 7fad193dc645..9a946df27f07 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -1677,6 +1677,7 @@ struct drm_bridge {
  * @dev: parent DRM device
  * @allow_modeset: allow full modeset
  * @legacy_cursor_update: hint to enforce legacy cursor IOCTL semantics
+ * @legacy_set_config: Disable conflicting encoders instead of failing with -EINVAL.
  * @planes: pointer to array of plane pointers
  * @plane_states: pointer to array of plane states pointers
  * @crtcs: pointer to array of CRTC pointers
@@ -1690,6 +1691,7 @@ struct drm_atomic_state {
 	struct drm_device *dev;
 	bool allow_modeset : 1;
 	bool legacy_cursor_update : 1;
+	bool legacy_set_config : 1;
 	struct drm_plane **planes;
 	struct drm_plane_state **plane_states;
 	struct drm_crtc **crtcs;
-- 
2.1.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2016-03-03  9:17 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-03  9:17 [PATCH v3 0/7] drm/atomic: Fix encoder stealing, v3 Maarten Lankhorst
2016-03-03  9:17 ` [PATCH v3 1/7] drm/atomic: Clean up update_output_state Maarten Lankhorst
2016-03-03  9:17 ` [PATCH v3 2/7] drm/atomic: Pass connector and state to update_connector_routing Maarten Lankhorst
2016-03-03  9:17 ` [PATCH v3 3/7] drm/atomic: Always call steal_encoder, v2 Maarten Lankhorst
2016-03-03  9:17 ` Maarten Lankhorst [this message]
2016-03-03  9:17 ` [PATCH v3 5/7] drm/atomic: Handle encoder assignment conflicts in a separate check, v3 Maarten Lankhorst
2016-03-04 13:24   ` Ville Syrjälä
2016-03-03  9:17 ` [PATCH v3 6/7] drm/atomic: Clean up steal_encoder, v2 Maarten Lankhorst
2016-03-03  9:41   ` [Intel-gfx] " kbuild test robot
2016-03-04 13:27   ` Ville Syrjälä
2016-03-03  9:17 ` [PATCH v3 7/7] drm/atomic: Clean up update_connector_routing Maarten Lankhorst
2016-03-04 13:29   ` [Intel-gfx] " Ville Syrjälä
2016-03-08 12:20     ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1456996662-8704-5-git-send-email-maarten.lankhorst@linux.intel.com \
    --to=maarten.lankhorst@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox