dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Alex Deucher <alexdeucher@gmail.com>
To: dri-devel@lists.freedesktop.org
Cc: Eric Huang <JinHuiEric.Huang@amd.com>,
	Alex Deucher <alexander.deucher@amd.com>
Subject: [PATCH 3/6] drm/amdgpu: add powerplay sclk OD support through sysfs
Date: Fri, 13 May 2016 14:48:53 -0400	[thread overview]
Message-ID: <1463165336-14878-4-git-send-email-alexander.deucher@amd.com> (raw)
In-Reply-To: <1463165336-14878-1-git-send-email-alexander.deucher@amd.com>

From: Eric Huang <JinHuiEric.Huang@amd.com>

Add a new sysfs entry pp_sclk_od to support sclk overdrive(OD) overclocking,
the entry is read/write, the value of input/output is an integer which is the
over percentage of the highest sclk.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h               |  6 +++
 drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c            | 49 +++++++++++++++++++++++
 drivers/gpu/drm/amd/powerplay/amd_powerplay.c     | 44 ++++++++++++++++++++
 drivers/gpu/drm/amd/powerplay/inc/amd_powerplay.h |  2 +
 drivers/gpu/drm/amd/powerplay/inc/hwmgr.h         |  2 +
 5 files changed, 103 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
index 992f00b..367dbc4 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -2335,6 +2335,12 @@ amdgpu_get_sdma_instance(struct amdgpu_ring *ring)
 #define amdgpu_dpm_force_clock_level(adev, type, level) \
 		(adev)->powerplay.pp_funcs->force_clock_level((adev)->powerplay.pp_handle, type, level)
 
+#define amdgpu_dpm_get_sclk_od(adev) \
+	(adev)->powerplay.pp_funcs->get_sclk_od((adev)->powerplay.pp_handle)
+
+#define amdgpu_dpm_set_sclk_od(adev, value) \
+	(adev)->powerplay.pp_funcs->set_sclk_od((adev)->powerplay.pp_handle, value)
+
 #define amdgpu_dpm_dispatch_task(adev, event_id, input, output)		\
 	(adev)->powerplay.pp_funcs->dispatch_tasks((adev)->powerplay.pp_handle, (event_id), (input), (output))
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
index 589b36e..f7ecaf4 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
@@ -471,6 +471,46 @@ fail:
 	return count;
 }
 
+static ssize_t amdgpu_get_pp_sclk_od(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct drm_device *ddev = dev_get_drvdata(dev);
+	struct amdgpu_device *adev = ddev->dev_private;
+	uint32_t value = 0;
+
+	if (adev->pp_enabled)
+		value = amdgpu_dpm_get_sclk_od(adev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", value);;
+}
+
+static ssize_t amdgpu_set_pp_sclk_od(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf,
+		size_t count)
+{
+	struct drm_device *ddev = dev_get_drvdata(dev);
+	struct amdgpu_device *adev = ddev->dev_private;
+	int ret;
+	long int value;
+
+	ret = kstrtol(buf, 0, &value);
+
+	if (ret) {
+		count = -EINVAL;
+		goto fail;
+	}
+
+	if (adev->pp_enabled)
+		amdgpu_dpm_set_sclk_od(adev, (uint32_t)value);
+
+	amdgpu_dpm_dispatch_task(adev, AMD_PP_EVENT_READJUST_POWER_STATE, NULL, NULL);
+
+fail:
+	return count;
+}
+
 static DEVICE_ATTR(power_dpm_state, S_IRUGO | S_IWUSR, amdgpu_get_dpm_state, amdgpu_set_dpm_state);
 static DEVICE_ATTR(power_dpm_force_performance_level, S_IRUGO | S_IWUSR,
 		   amdgpu_get_dpm_forced_performance_level,
@@ -492,6 +532,9 @@ static DEVICE_ATTR(pp_dpm_mclk, S_IRUGO | S_IWUSR,
 static DEVICE_ATTR(pp_dpm_pcie, S_IRUGO | S_IWUSR,
 		amdgpu_get_pp_dpm_pcie,
 		amdgpu_set_pp_dpm_pcie);
+static DEVICE_ATTR(pp_sclk_od, S_IRUGO | S_IWUSR,
+		amdgpu_get_pp_sclk_od,
+		amdgpu_set_pp_sclk_od);
 
 static ssize_t amdgpu_hwmon_show_temp(struct device *dev,
 				      struct device_attribute *attr,
@@ -1125,6 +1168,11 @@ int amdgpu_pm_sysfs_init(struct amdgpu_device *adev)
 			DRM_ERROR("failed to create device file pp_dpm_pcie\n");
 			return ret;
 		}
+		ret = device_create_file(adev->dev, &dev_attr_pp_sclk_od);
+		if (ret) {
+			DRM_ERROR("failed to create device file pp_sclk_od\n");
+			return ret;
+		}
 	}
 	ret = amdgpu_debugfs_pm_init(adev);
 	if (ret) {
@@ -1151,6 +1199,7 @@ void amdgpu_pm_sysfs_fini(struct amdgpu_device *adev)
 		device_remove_file(adev->dev, &dev_attr_pp_dpm_sclk);
 		device_remove_file(adev->dev, &dev_attr_pp_dpm_mclk);
 		device_remove_file(adev->dev, &dev_attr_pp_dpm_pcie);
+		device_remove_file(adev->dev, &dev_attr_pp_sclk_od);
 	}
 }
 
diff --git a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
index 8e345bf..e0f2440 100644
--- a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
@@ -530,6 +530,10 @@ int pp_dpm_dispatch_tasks(void *handle, enum amd_pp_event event_id, void *input,
 	case AMD_PP_EVENT_COMPLETE_INIT:
 		ret = pem_handle_event(pp_handle->eventmgr, event_id, &data);
 		break;
+	case AMD_PP_EVENT_READJUST_POWER_STATE:
+		pp_handle->hwmgr->current_ps = pp_handle->hwmgr->boot_ps;
+		ret = pem_handle_event(pp_handle->eventmgr, event_id, &data);
+		break;
 	default:
 		break;
 	}
@@ -800,6 +804,44 @@ static int pp_dpm_print_clock_levels(void *handle,
 	return hwmgr->hwmgr_func->print_clock_levels(hwmgr, type, buf);
 }
 
+static int pp_dpm_get_sclk_od(void *handle)
+{
+	struct pp_hwmgr *hwmgr;
+
+	if (!handle)
+		return -EINVAL;
+
+	hwmgr = ((struct pp_instance *)handle)->hwmgr;
+
+	PP_CHECK_HW(hwmgr);
+
+	if (hwmgr->hwmgr_func->get_sclk_od == NULL) {
+		printk(KERN_INFO "%s was not implemented.\n", __func__);
+		return 0;
+	}
+
+	return hwmgr->hwmgr_func->get_sclk_od(hwmgr);
+}
+
+static int pp_dpm_set_sclk_od(void *handle, uint32_t value)
+{
+	struct pp_hwmgr *hwmgr;
+
+	if (!handle)
+		return -EINVAL;
+
+	hwmgr = ((struct pp_instance *)handle)->hwmgr;
+
+	PP_CHECK_HW(hwmgr);
+
+	if (hwmgr->hwmgr_func->set_sclk_od == NULL) {
+		printk(KERN_INFO "%s was not implemented.\n", __func__);
+		return 0;
+	}
+
+	return hwmgr->hwmgr_func->set_sclk_od(hwmgr, value);
+}
+
 const struct amd_powerplay_funcs pp_dpm_funcs = {
 	.get_temperature = pp_dpm_get_temperature,
 	.load_firmware = pp_dpm_load_fw,
@@ -822,6 +864,8 @@ const struct amd_powerplay_funcs pp_dpm_funcs = {
 	.set_pp_table = pp_dpm_set_pp_table,
 	.force_clock_level = pp_dpm_force_clock_level,
 	.print_clock_levels = pp_dpm_print_clock_levels,
+	.get_sclk_od = pp_dpm_get_sclk_od,
+	.set_sclk_od = pp_dpm_set_sclk_od,
 };
 
 static int amd_pp_instance_init(struct amd_pp_init *pp_init,
diff --git a/drivers/gpu/drm/amd/powerplay/inc/amd_powerplay.h b/drivers/gpu/drm/amd/powerplay/inc/amd_powerplay.h
index 50b367d..154d406 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/amd_powerplay.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/amd_powerplay.h
@@ -342,6 +342,8 @@ struct amd_powerplay_funcs {
 	int (*set_pp_table)(void *handle, const char *buf, size_t size);
 	int (*force_clock_level)(void *handle, enum pp_clock_type type, uint32_t mask);
 	int (*print_clock_levels)(void *handle, enum pp_clock_type type, char *buf);
+	int (*get_sclk_od)(void *handle);
+	int (*set_sclk_od)(void *handle, uint32_t value);
 };
 
 struct amd_powerplay {
diff --git a/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h b/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h
index 28f5714..37ebfa2 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h
@@ -338,6 +338,8 @@ struct pp_hwmgr_func {
 	int (*force_clock_level)(struct pp_hwmgr *hwmgr, enum pp_clock_type type, uint32_t mask);
 	int (*print_clock_levels)(struct pp_hwmgr *hwmgr, enum pp_clock_type type, char *buf);
 	int (*enable_per_cu_power_gating)(struct pp_hwmgr *hwmgr, bool enable);
+	int (*get_sclk_od)(struct pp_hwmgr *hwmgr);
+	int (*set_sclk_od)(struct pp_hwmgr *hwmgr, uint32_t value);
 };
 
 struct pp_table_func {
-- 
2.5.5

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2016-05-13 18:49 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-13 18:48 [PATCH 0/6] Initial sclk OD support for amdgpu Alex Deucher
2016-05-13 18:48 ` [PATCH 1/6] drm/amd/powerplay: fix a bug on updating sclk for Fiji Alex Deucher
2016-05-13 18:48 ` [PATCH 2/6] drm/amd/powerplay: fix a bug on updating sclk for Tonga Alex Deucher
2016-05-13 18:48 ` Alex Deucher [this message]
2016-05-14  6:27   ` [PATCH 3/6] drm/amdgpu: add powerplay sclk OD support through sysfs Nils Wallménius
2016-05-16 15:35     ` Eric Huang
2016-05-13 18:48 ` [PATCH 4/6] drm/amd/powerplay: add sclk OD support on Fiji Alex Deucher
2016-05-14 14:03   ` Emil Velikov
2016-05-16 14:42     ` Alex Deucher
2016-05-16 22:04       ` Emil Velikov
2016-05-16 22:23         ` Alex Deucher
2016-05-13 18:48 ` [PATCH 5/6] drm/amd/powerplay: add sclk OD support on Tonga Alex Deucher
2016-05-13 18:48 ` [PATCH 6/6] drm/amd/powerplay: add sclk OD support on Polaris10 Alex Deucher
2016-05-13 18:54 ` [PATCH 0/6] Initial sclk OD support for amdgpu Mike Lothian
2016-05-13 18:56   ` Alex Deucher
2016-05-13 19:45     ` Mike Lothian
2016-05-13 21:38       ` Alex Deucher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1463165336-14878-4-git-send-email-alexander.deucher@amd.com \
    --to=alexdeucher@gmail.com \
    --cc=JinHuiEric.Huang@amd.com \
    --cc=alexander.deucher@amd.com \
    --cc=dri-devel@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox