dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Alex Deucher <alexdeucher@gmail.com>
To: dri-devel@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Subject: [PATCH 6/8] drm/amdgpu/gfx8: add powergating support for CZ/ST
Date: Fri, 20 May 2016 08:24:26 -0400	[thread overview]
Message-ID: <1463747068-12039-7-git-send-email-alexander.deucher@amd.com> (raw)
In-Reply-To: <1463747068-12039-1-git-send-email-alexander.deucher@amd.com>

This implements powergating support for CZ/ST asics.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 132 ++++++++++++++++++++++++++++++++--
 1 file changed, 126 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index 36ec41f..0508cef 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -3810,6 +3810,53 @@ static void gfx_v8_0_init_power_gating(struct amdgpu_device *adev)
 	}
 }
 
+static void cz_enable_sck_slow_down_on_power_up(struct amdgpu_device *adev,
+						bool enable)
+{
+	u32 data, orig;
+
+	orig = data = RREG32(mmRLC_PG_CNTL);
+
+	if (enable)
+		data |= RLC_PG_CNTL__SMU_CLK_SLOWDOWN_ON_PU_ENABLE_MASK;
+	else
+		data &= ~RLC_PG_CNTL__SMU_CLK_SLOWDOWN_ON_PU_ENABLE_MASK;
+
+	if (orig != data)
+		WREG32(mmRLC_PG_CNTL, data);
+}
+
+static void cz_enable_sck_slow_down_on_power_down(struct amdgpu_device *adev,
+						  bool enable)
+{
+	u32 data, orig;
+
+	orig = data = RREG32(mmRLC_PG_CNTL);
+
+	if (enable)
+		data |= RLC_PG_CNTL__SMU_CLK_SLOWDOWN_ON_PD_ENABLE_MASK;
+	else
+		data &= ~RLC_PG_CNTL__SMU_CLK_SLOWDOWN_ON_PD_ENABLE_MASK;
+
+	if (orig != data)
+		WREG32(mmRLC_PG_CNTL, data);
+}
+
+static void cz_enable_cp_power_gating(struct amdgpu_device *adev, bool enable)
+{
+	u32 data, orig;
+
+	orig = data = RREG32(mmRLC_PG_CNTL);
+
+	if (enable)
+		data &= ~RLC_PG_CNTL__CP_PG_DISABLE_MASK;
+	else
+		data |= RLC_PG_CNTL__CP_PG_DISABLE_MASK;
+
+	if (orig != data)
+		WREG32(mmRLC_PG_CNTL, data);
+}
+
 static void gfx_v8_0_init_pg(struct amdgpu_device *adev)
 {
 	if (adev->pg_flags & (AMD_PG_SUPPORT_GFX_PG |
@@ -3827,6 +3874,17 @@ static void gfx_v8_0_init_pg(struct amdgpu_device *adev)
 			WREG32(mmRLC_JUMP_TABLE_RESTORE, adev->gfx.rlc.cp_table_gpu_addr >> 8);
 			gfx_v8_0_init_power_gating(adev);
 			WREG32(mmRLC_PG_ALWAYS_ON_CU_MASK, adev->gfx.cu_info.ao_cu_mask);
+			if (adev->pg_flags & AMD_PG_SUPPORT_RLC_SMU_HS) {
+				cz_enable_sck_slow_down_on_power_up(adev, true);
+				cz_enable_sck_slow_down_on_power_down(adev, true);
+			} else {
+				cz_enable_sck_slow_down_on_power_up(adev, false);
+				cz_enable_sck_slow_down_on_power_down(adev, false);
+			}
+			if (adev->pg_flags & AMD_PG_SUPPORT_CP)
+				cz_enable_cp_power_gating(adev, true);
+			else
+				cz_enable_cp_power_gating(adev, false);
 		} else if (adev->asic_type == CHIP_POLARIS11) {
 			gfx_v8_0_init_power_gating(adev);
 		}
@@ -5232,25 +5290,87 @@ static void polaris11_enable_gfx_quick_mg_power_gating(struct amdgpu_device *ade
 	}
 }
 
+static void cz_enable_gfx_cg_power_gating(struct amdgpu_device *adev,
+					  bool enable)
+{
+	u32 data, orig;
+
+	orig = data = RREG32(mmRLC_PG_CNTL);
+
+	if (enable)
+		data |= RLC_PG_CNTL__GFX_POWER_GATING_ENABLE_MASK;
+	else
+		data &= ~RLC_PG_CNTL__GFX_POWER_GATING_ENABLE_MASK;
+
+	if (orig != data)
+		WREG32(mmRLC_PG_CNTL, data);
+}
+
+static void cz_enable_gfx_pipeline_power_gating(struct amdgpu_device *adev,
+						bool enable)
+{
+	u32 data, orig;
+
+	orig = data = RREG32(mmRLC_PG_CNTL);
+
+	if (enable)
+		data |= RLC_PG_CNTL__GFX_PIPELINE_PG_ENABLE_MASK;
+	else
+		data &= ~RLC_PG_CNTL__GFX_PIPELINE_PG_ENABLE_MASK;
+
+	if (orig != data)
+		WREG32(mmRLC_PG_CNTL, data);
+
+	/* Read any GFX register to wake up GFX. */
+	if (!enable)
+		data = RREG32(mmDB_RENDER_CONTROL);
+}
+
+static void cz_update_gfx_cg_power_gating(struct amdgpu_device *adev,
+					  bool enable)
+{
+	if ((adev->pg_flags & AMD_PG_SUPPORT_GFX_PG) && enable) {
+		cz_enable_gfx_cg_power_gating(adev, true);
+		if (adev->pg_flags & AMD_PG_SUPPORT_GFX_PIPELINE)
+			cz_enable_gfx_pipeline_power_gating(adev, true);
+	} else {
+		cz_enable_gfx_cg_power_gating(adev, false);
+		cz_enable_gfx_pipeline_power_gating(adev, false);
+	}
+}
+
 static int gfx_v8_0_set_powergating_state(void *handle,
 					  enum amd_powergating_state state)
 {
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+	bool enable = (state == AMD_PG_STATE_GATE) ? true : false;
 
 	if (!(adev->pg_flags & AMD_PG_SUPPORT_GFX_PG))
 		return 0;
 
 	switch (adev->asic_type) {
+	case CHIP_CARRIZO:
+	case CHIP_STONEY:
+		if (adev->pg_flags & AMD_PG_SUPPORT_GFX_PG)
+			cz_update_gfx_cg_power_gating(adev, enable);
+
+		if ((adev->pg_flags & AMD_PG_SUPPORT_GFX_SMG) && enable)
+			gfx_v8_0_enable_gfx_static_mg_power_gating(adev, true);
+		else
+			gfx_v8_0_enable_gfx_static_mg_power_gating(adev, false);
+
+		if ((adev->pg_flags & AMD_PG_SUPPORT_GFX_DMG) && enable)
+			gfx_v8_0_enable_gfx_dynamic_mg_power_gating(adev, true);
+		else
+			gfx_v8_0_enable_gfx_dynamic_mg_power_gating(adev, false);
+		break;
 	case CHIP_POLARIS11:
 		if (adev->pg_flags & AMD_PG_SUPPORT_GFX_SMG)
-			gfx_v8_0_enable_gfx_static_mg_power_gating(adev,
-					state == AMD_PG_STATE_GATE ? true : false);
+			gfx_v8_0_enable_gfx_static_mg_power_gating(adev, enable);
 		else if (adev->pg_flags & AMD_PG_SUPPORT_GFX_DMG)
-			gfx_v8_0_enable_gfx_dynamic_mg_power_gating(adev,
-					state == AMD_PG_STATE_GATE ? true : false);
+			gfx_v8_0_enable_gfx_dynamic_mg_power_gating(adev, enable);
 		else
-			polaris11_enable_gfx_quick_mg_power_gating(adev,
-					state == AMD_PG_STATE_GATE ? true : false);
+			polaris11_enable_gfx_quick_mg_power_gating(adev, enable);
 		break;
 	default:
 		break;
-- 
2.5.5

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2016-05-20 12:24 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-20 12:24 [PATCH 0/8] Add GFX powergating support for CZ Alex Deucher
2016-05-20 12:24 ` [PATCH 1/8] drm/amdgpu/gfx7: expand cp jt size to handle GDS as well Alex Deucher
2016-05-20 12:24 ` [PATCH 2/8] drm/radeon/gfx7: " Alex Deucher
2016-05-20 12:24 ` [PATCH 3/8] drm/amdgpu/gfx8: add state setup for CZ/ST GFX power gating Alex Deucher
2016-05-20 12:24 ` [PATCH 4/8] drm/amdgpu/gfx8: rename some pg functions Alex Deucher
2016-05-20 12:24 ` [PATCH 5/8] drm/amdgpu: add new GFX powergating types Alex Deucher
2016-05-20 12:24 ` Alex Deucher [this message]
2016-05-20 12:24 ` [PATCH 7/8] drm/amdgpu/gfx8: clean up polaris11 PG enable Alex Deucher
2016-05-20 12:24 ` [PATCH 8/8] drm/amdgpu/gfx8: Enable GFX PG on CZ Alex Deucher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1463747068-12039-7-git-send-email-alexander.deucher@amd.com \
    --to=alexdeucher@gmail.com \
    --cc=alexander.deucher@amd.com \
    --cc=dri-devel@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).