dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Sinclair Yeh <syeh@vmware.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-graphics-maintainer@vmware.com, stable@vger.kernel.org
Subject: [PATCH 2/2] drm/vmwgfx: Add an option to change assumed FB bpp
Date: Wed, 29 Jun 2016 17:14:48 -0700	[thread overview]
Message-ID: <1467245688-24449-3-git-send-email-syeh@vmware.com> (raw)
In-Reply-To: <1467245688-24449-1-git-send-email-syeh@vmware.com>

Offer an option for advanced users who want larger modes at 16bpp.

This becomes necessary after the fix: "Work around mode set
failure in 2D VMs."  Without this patch, there would be no way
for existing advanced users to get to a high res mode.

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: <stable@vger.kernel.org>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 5 +++++
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 1 +
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 3 +++
 3 files changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index fc9ad00..8d528fc 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -233,6 +233,7 @@ static int vmw_force_iommu;
 static int vmw_restrict_iommu;
 static int vmw_force_coherent;
 static int vmw_restrict_dma_mask;
+static int vmw_assume_16bpp;
 
 static int vmw_probe(struct pci_dev *, const struct pci_device_id *);
 static void vmw_master_init(struct vmw_master *);
@@ -249,6 +250,8 @@ MODULE_PARM_DESC(force_coherent, "Force coherent TTM pages");
 module_param_named(force_coherent, vmw_force_coherent, int, 0600);
 MODULE_PARM_DESC(restrict_dma_mask, "Restrict DMA mask to 44 bits with IOMMU");
 module_param_named(restrict_dma_mask, vmw_restrict_dma_mask, int, 0600);
+MODULE_PARM_DESC(assume_16bpp, "Assume 16-bpp when filtering modes");
+module_param_named(assume_16bpp, vmw_assume_16bpp, int, 0600);
 
 
 static void vmw_print_capabilities(uint32_t capabilities)
@@ -660,6 +663,8 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
 	dev_priv->vram_start = pci_resource_start(dev->pdev, 1);
 	dev_priv->mmio_start = pci_resource_start(dev->pdev, 2);
 
+	dev_priv->assume_16bpp = !!vmw_assume_16bpp;
+
 	dev_priv->enable_fb = enable_fbdev;
 
 	vmw_write(dev_priv, SVGA_REG_ID, SVGA_ID_2);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
index 1980e2a..89fb194 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -386,6 +386,7 @@ struct vmw_private {
 	spinlock_t hw_lock;
 	spinlock_t cap_lock;
 	bool has_dx;
+	bool assume_16bpp;
 
 	/*
 	 * VGA registers.
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index 077f16d..e29da45 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -1555,6 +1555,9 @@ int vmw_du_connector_fill_modes(struct drm_connector *connector,
 	int i;
 	u32 assumed_bpp = 4;
 
+	if (dev_priv->assume_16bpp)
+		assumed_bpp = 2;
+
 	if (dev_priv->active_display_unit == vmw_du_screen_target) {
 		max_width  = min(max_width,  dev_priv->stdu_max_width);
 		max_height = min(max_height, dev_priv->stdu_max_height);
-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

      parent reply	other threads:[~2016-06-30  0:16 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-30  0:14 [PATCH 0/2] drm/vmwgfx: Fix various black screen issues Sinclair Yeh
2016-06-30  0:14 ` [PATCH 1/2] drm/vmwgfx: Work around mode set failure in 2D VMs Sinclair Yeh
2016-06-30  0:14 ` Sinclair Yeh [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1467245688-24449-3-git-send-email-syeh@vmware.com \
    --to=syeh@vmware.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-graphics-maintainer@vmware.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).