[PATCH 4/5] drm/intel/dp: Try harder to get bpc of a DP sink if EDID doesn't tell.

[Mario Kleiner <mario.kleiner.de@gmail.com>]

For DP sinks which don't expose color depth via EDID, use
the drm_dp_sink_bpc() helper to derive the bpc of the sink.

This should handle DP native sinks with the "Assume 6 bpc if EDID
doesn't tell us" as mandated by DP spec. It gives more accurate
values for DP->legacy converters for HDMI, DVI and VGA.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 26 +++++++++++++++++++++-----
 drivers/gpu/drm/i915/intel_dp.c      |  7 +++++++
 drivers/gpu/drm/i915/intel_drv.h     |  1 +
 3 files changed, 29 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c7854f4..1a5287f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12212,11 +12212,27 @@ connected_sink_compute_bpp(struct intel_connector *connector,
 		pipe_config->pipe_bpp = connector->base.display_info.bpc*3;
 	}
 
-	/* Clamp bpp to 8 on screens without EDID 1.4 */
-	if (connector->base.display_info.bpc == 0 && bpp > 24) {
-		DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of 24\n",
-			      bpp);
-		pipe_config->pipe_bpp = 24;
+	/* Clamp bpp to default limit on screens without EDID 1.4 */
+	if (connector->base.display_info.bpc == 0) {
+		int type = connector->base.connector_type;
+		int clamp_bpp = 24;
+
+		/* On DisplayPort try harder to find sink bpc */
+		if (type == DRM_MODE_CONNECTOR_DisplayPort ||
+		    type == DRM_MODE_CONNECTOR_eDP) {
+			int sink_bpc = intel_dp_sink_bpc(&connector->base);
+
+			if (sink_bpc) {
+				DRM_DEBUG_KMS("DP sink with bpc %d\n", sink_bpc);
+				clamp_bpp = 3 * sink_bpc;
+			}
+		}
+
+		if (bpp > clamp_bpp) {
+			DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of %d\n",
+				      bpp, clamp_bpp);
+			pipe_config->pipe_bpp = clamp_bpp;
+		}
 	}
 }
 
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index ffa43ec..d8dab0b 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -5689,3 +5689,10 @@ void intel_dp_mst_resume(struct drm_device *dev)
 		}
 	}
 }
+
+/* XXX Only supports up to 1 downstream port atm. */
+int intel_dp_sink_bpc(struct drm_connector *connector)
+{
+	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	return drm_dp_sink_bpc(intel_dp->dpcd, intel_dp->downstream_ports, 0);
+}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 089a425..e8feac1 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1335,6 +1335,7 @@ void intel_edp_panel_off(struct intel_dp *intel_dp);
 void intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector);
 void intel_dp_mst_suspend(struct drm_device *dev);
 void intel_dp_mst_resume(struct drm_device *dev);
+int intel_dp_sink_bpc(struct drm_connector *connector);
 int intel_dp_max_link_rate(struct intel_dp *intel_dp);
 int intel_dp_rate_select(struct intel_dp *intel_dp, int rate);
 void intel_dp_hot_plug(struct intel_encoder *intel_encoder);
-- 
2.7.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel