From: Lyude <cpaul@redhat.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>,
David Airlie <airlied@linux.ie>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Daniel Vetter <daniel.vetter@intel.com>
Subject: [PATCH 07/10] drm/i915/gen9: Make skl_pipe_wm_get_hw_state() reusable
Date: Fri, 7 Oct 2016 20:11:31 -0400 [thread overview]
Message-ID: <1475885497-6094-8-git-send-email-cpaul@redhat.com> (raw)
In-Reply-To: <1475885497-6094-1-git-send-email-cpaul@redhat.com>
There's not much of a reason this should have the locations to read out
the hardware state hardcoded, so allow the caller to specify the
location and add this function to intel_drv.h. As well, we're going to
need this function to be reusable for the next patch.
Signed-off-by: Lyude <cpaul@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
drivers/gpu/drm/i915/intel_drv.h | 2 ++
drivers/gpu/drm/i915/intel_pm.c | 27 +++++++++++++++++----------
2 files changed, 19 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 958dc72..73a2d16d 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1756,6 +1756,8 @@ void ilk_wm_get_hw_state(struct drm_device *dev);
void skl_wm_get_hw_state(struct drm_device *dev);
void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
struct skl_ddb_allocation *ddb /* out */);
+void skl_pipe_wm_get_hw_state(struct drm_crtc *crtc,
+ struct skl_pipe_wm *out);
bool intel_can_enable_sagv(struct drm_atomic_state *state);
int intel_enable_sagv(struct drm_i915_private *dev_priv);
int intel_disable_sagv(struct drm_i915_private *dev_priv);
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 9e53ff7..27a520ce 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4287,15 +4287,13 @@ static inline void skl_wm_level_from_reg_val(uint32_t val,
PLANE_WM_LINES_MASK;
}
-static void skl_pipe_wm_get_hw_state(struct drm_crtc *crtc)
+void skl_pipe_wm_get_hw_state(struct drm_crtc *crtc,
+ struct skl_pipe_wm *out)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
- struct skl_wm_values *hw = &dev_priv->wm.skl_hw;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state);
struct intel_plane *intel_plane;
- struct skl_pipe_wm *active = &cstate->wm.skl.optimal;
struct skl_plane_wm *wm;
enum pipe pipe = intel_crtc->pipe;
int level, id, max_level = ilk_wm_max_level(dev);
@@ -4303,7 +4301,7 @@ static void skl_pipe_wm_get_hw_state(struct drm_crtc *crtc)
for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
id = skl_wm_plane_id(intel_plane);
- wm = &cstate->wm.skl.optimal.planes[id];
+ wm = &out->planes[id];
for (level = 0; level <= max_level; level++) {
if (id != PLANE_CURSOR)
@@ -4325,20 +4323,29 @@ static void skl_pipe_wm_get_hw_state(struct drm_crtc *crtc)
if (!intel_crtc->active)
return;
- hw->dirty_pipes |= drm_crtc_mask(crtc);
- active->linetime = I915_READ(PIPE_WM_LINETIME(pipe));
- intel_crtc->wm.active.skl = *active;
+ out->linetime = I915_READ(PIPE_WM_LINETIME(pipe));
}
void skl_wm_get_hw_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
+ struct skl_wm_values *hw = &dev_priv->wm.skl_hw;
struct skl_ddb_allocation *ddb = &dev_priv->wm.skl_hw.ddb;
struct drm_crtc *crtc;
+ struct intel_crtc *intel_crtc;
+ struct intel_crtc_state *cstate;
skl_ddb_get_hw_state(dev_priv, ddb);
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
- skl_pipe_wm_get_hw_state(crtc);
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ intel_crtc = to_intel_crtc(crtc);
+ cstate = to_intel_crtc_state(crtc->state);
+
+ skl_pipe_wm_get_hw_state(crtc, &cstate->wm.skl.optimal);
+ intel_crtc->wm.active.skl = cstate->wm.skl.optimal;
+
+ if (!intel_crtc->active)
+ hw->dirty_pipes |= drm_crtc_mask(crtc);
+ }
if (dev_priv->active_crtcs) {
/* Fully recompute DDB on first atomic commit */
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-10-08 0:11 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-08 0:11 [PATCH v2 00/10] Start of skl watermark cleanup Lyude
2016-10-08 0:11 ` [PATCH v2 01/10] drm/i915/skl: Move per-pipe ddb allocations into crtc states Lyude
2016-10-11 19:36 ` Paulo Zanoni
2016-10-08 0:11 ` [PATCH v2 02/10] drm/i915/skl: Remove linetime from skl_wm_values Lyude
2016-10-08 0:11 ` [PATCH v2 03/10] drm/i915/gen9: Make skl_wm_level per-plane Lyude
2016-10-11 19:36 ` Paulo Zanoni
2016-10-08 0:11 ` [PATCH 04/10] drm/i915/gen9: Cleanup skl_pipe_wm_active_state Lyude
2016-10-11 19:40 ` Paulo Zanoni
2016-10-08 0:11 ` [PATCH v2 05/10] drm/i915/gen9: Get rid of redundant watermark values Lyude
2016-10-13 13:39 ` [Intel-gfx] " Maarten Lankhorst
2016-10-13 20:04 ` Paulo Zanoni
2016-10-13 20:07 ` Paulo Zanoni
2016-10-13 21:25 ` [Intel-gfx] " Lyude Paul
2016-10-17 6:05 ` Daniel Vetter
2016-10-17 8:07 ` Maarten Lankhorst
2016-10-08 0:11 ` [PATCH v2 06/10] drm/i915/gen9: Add ddb changes to atomic debug output Lyude
2016-10-13 20:17 ` Paulo Zanoni
2016-10-08 0:11 ` Lyude [this message]
2016-10-13 20:36 ` [PATCH 07/10] drm/i915/gen9: Make skl_pipe_wm_get_hw_state() reusable Paulo Zanoni
2016-10-08 0:11 ` [PATCH 08/10] drm/i915/gen9: Add skl_wm_level_equals() Lyude
2016-10-13 20:40 ` Paulo Zanoni
2016-10-08 0:11 ` [PATCH 09/10] drm/i915/gen9: Actually verify WM levels in verify_wm_state() Lyude
2016-10-13 21:15 ` Paulo Zanoni
2016-10-13 21:20 ` Paulo Zanoni
2016-10-08 0:11 ` [PATCH 10/10] drm/i915/gen9: Don't wrap strings " Lyude
2016-10-13 21:18 ` Paulo Zanoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1475885497-6094-8-git-send-email-cpaul@redhat.com \
--to=cpaul@redhat.com \
--cc=airlied@linux.ie \
--cc=daniel.vetter@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=paulo.r.zanoni@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).