From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
To: linux-renesas-soc@vger.kernel.org,
laurent.pinchart@ideasonboard.com,
dri-devel@lists.freedesktop.org
Cc: kuninori.morimoto.gx@renesas.com, geert@linux-m68k.org,
airlied@linux.ie, koji.matsuoka.xm@renesas.com
Subject: [PATCH 03/10] drm: rcar-du: Add R8A7795 device support
Date: Fri, 11 Nov 2016 18:07:39 +0100 [thread overview]
Message-ID: <1478884066-1090-4-git-send-email-ulrich.hecht+renesas@gmail.com> (raw)
In-Reply-To: <1478884066-1090-1-git-send-email-ulrich.hecht+renesas@gmail.com>
From: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
---
drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 4 +++-
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 14 ++++++++++++--
drivers/gpu/drm/rcar-du/rcar_du_drv.h | 2 ++
3 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
index 6f08b7e..459e539 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h
@@ -1,7 +1,7 @@
/*
* rcar_du_crtc.h -- R-Car Display Unit CRTCs
*
- * Copyright (C) 2013-2014 Renesas Electronics Corporation
+ * Copyright (C) 2013-2015 Renesas Electronics Corporation
*
* Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
*
@@ -61,6 +61,8 @@ enum rcar_du_output {
RCAR_DU_OUTPUT_DPAD1,
RCAR_DU_OUTPUT_LVDS0,
RCAR_DU_OUTPUT_LVDS1,
+ RCAR_DU_OUTPUT_HDMI0,
+ RCAR_DU_OUTPUT_HDMI1,
RCAR_DU_OUTPUT_TCON,
RCAR_DU_OUTPUT_MAX,
};
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 73c971e..4d0ae8a 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -140,14 +140,24 @@ static const struct rcar_du_device_info rcar_du_r8a7795_info = {
| RCAR_DU_FEATURE_VSP1_SOURCE,
.num_crtcs = 4,
.routes = {
- /* R8A7795 has one RGB output, one LVDS output and two
- * (currently unsupported) HDMI outputs.
+ /* R8A7795 has one RGB output, two HDMI outputs and one
+ * LVDS output.
*/
[RCAR_DU_OUTPUT_DPAD0] = {
.possible_crtcs = BIT(3),
.encoder_type = DRM_MODE_ENCODER_NONE,
.port = 0,
},
+ [RCAR_DU_OUTPUT_HDMI0] = {
+ .possible_crtcs = BIT(1),
+ .encoder_type = RCAR_DU_ENCODER_HDMI,
+ .port = 1,
+ },
+ [RCAR_DU_OUTPUT_HDMI1] = {
+ .possible_crtcs = BIT(2),
+ .encoder_type = RCAR_DU_ENCODER_HDMI,
+ .port = 2,
+ },
[RCAR_DU_OUTPUT_LVDS0] = {
.possible_crtcs = BIT(0),
.encoder_type = DRM_MODE_ENCODER_LVDS,
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
index c843c31..c9db610 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
@@ -20,6 +20,7 @@
#include "rcar_du_crtc.h"
#include "rcar_du_group.h"
#include "rcar_du_vsp.h"
+#include "rcar_du_encoder.h"
struct clk;
struct device;
@@ -31,6 +32,7 @@ struct rcar_du_lvdsenc;
#define RCAR_DU_FEATURE_CRTC_IRQ_CLOCK (1 << 0) /* Per-CRTC IRQ and clock */
#define RCAR_DU_FEATURE_EXT_CTRL_REGS (1 << 1) /* Has extended control registers */
#define RCAR_DU_FEATURE_VSP1_SOURCE (1 << 2) /* Has inputs from VSP1 */
+#define RCAR_DU_FEATURE_GEN3_REGS (1 << 3) /* Use Gen3 registers */
#define RCAR_DU_QUIRK_ALIGN_128B (1 << 0) /* Align pitches to 128 bytes */
#define RCAR_DU_QUIRK_LVDS_LANES (1 << 1) /* LVDS lanes 1 and 3 inverted */
--
2.7.4
next prev parent reply other threads:[~2016-11-11 17:07 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-11 17:07 [PATCH 00/10] Renesas R8A7795/Salvator-X HDMI output Ulrich Hecht
2016-11-11 17:07 ` [PATCH 01/10] drm: bridge/dw_hdmi: add dw hdmi i2c bus adapter support Ulrich Hecht
2016-11-11 17:48 ` Vladimir Zapolskiy
2016-11-11 17:07 ` [PATCH 02/10] drm: bridge/dw_hdmi: Add R-Car Gen3 device support Ulrich Hecht
2016-11-11 17:07 ` Ulrich Hecht [this message]
2016-11-11 17:07 ` [PATCH 04/10] drm: rcar-du: Add dw_hdmi driver startup Ulrich Hecht
2016-11-11 17:07 ` [PATCH 05/10] drm: rcar-du: Add DPLL support Ulrich Hecht
2016-11-11 17:07 ` [PATCH 06/10] drm: rcar-du: Fix display registers for R-Car Gen3 Ulrich Hecht
2016-11-11 17:07 ` [PATCH 07/10] arm64: dts: r8a7795: Add HDMI encoder support Ulrich Hecht
2016-11-11 17:07 ` [PATCH 08/10] arm64: dts: salvator-x: Add DU pins, HDMI connectors and encoder Ulrich Hecht
2016-11-11 17:07 ` [PATCH 09/10] arm64: dts: r8a7795: add HDMI support to DU Ulrich Hecht
2016-11-15 15:28 ` Sergei Shtylyov
2016-11-11 17:07 ` [PATCH 10/10] dt-bindings: drm/bridge: Add renesas,rcar-dw-hdmi Ulrich Hecht
2016-11-14 10:16 ` [PATCH 00/10] Renesas R8A7795/Salvator-X HDMI output Geert Uytterhoeven
2016-11-14 15:22 ` Ulrich Hecht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1478884066-1090-4-git-send-email-ulrich.hecht+renesas@gmail.com \
--to=ulrich.hecht+renesas@gmail.com \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=geert@linux-m68k.org \
--cc=koji.matsuoka.xm@renesas.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).