From: Fabien Dessenne <fabien.dessenne@st.com>
To: dri-devel@lists.freedesktop.org
Cc: Vincent Abriou <vincent.abriou@st.com>, kernel@stlinux.com
Subject: [PATCH 4/5] drm/sti: do not sync SETPROPERTY on vblank if not ATOMIC
Date: Tue, 3 Jan 2017 17:56:51 +0100 [thread overview]
Message-ID: <1483462612-29448-5-git-send-email-fabien.dessenne@st.com> (raw)
In-Reply-To: <1483462612-29448-1-git-send-email-fabien.dessenne@st.com>
If the client does not set the ATOMIC capability, do not wait for vblank
before returning an DRM_IOCTL_MODE_OBJ_SETPROPERTY call.
In this way, a legacy framework (eg non-atomic Weston) can call several
SETPROPERTY within the same Vsync cycle.
This is implemented by setting the legacy_cursor_update flag, to behave
the same way as DRM_IOCTL_MODE_CURSOR (not vblank synced).
Change-Id: I6b6134eca57eca399bdda006ab1cb8280d4002d4
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
---
drivers/gpu/drm/sti/sti_cursor.c | 2 +-
drivers/gpu/drm/sti/sti_gdp.c | 2 +-
drivers/gpu/drm/sti/sti_hqvdp.c | 2 +-
drivers/gpu/drm/sti/sti_plane.c | 54 ++++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/sti/sti_plane.h | 2 ++
5 files changed, 59 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/sti/sti_cursor.c b/drivers/gpu/drm/sti/sti_cursor.c
index ea0dbae..d7e9f8a 100644
--- a/drivers/gpu/drm/sti/sti_cursor.c
+++ b/drivers/gpu/drm/sti/sti_cursor.c
@@ -349,7 +349,7 @@ static const struct drm_plane_funcs sti_cursor_plane_helpers_funcs = {
.update_plane = sti_plane_update_plane,
.disable_plane = sti_plane_disable_plane,
.destroy = sti_cursor_destroy,
- .set_property = drm_atomic_helper_plane_set_property,
+ .set_property = sti_plane_set_property,
.reset = sti_plane_reset,
.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
diff --git a/drivers/gpu/drm/sti/sti_gdp.c b/drivers/gpu/drm/sti/sti_gdp.c
index a379bbe..6fa5042 100644
--- a/drivers/gpu/drm/sti/sti_gdp.c
+++ b/drivers/gpu/drm/sti/sti_gdp.c
@@ -885,7 +885,7 @@ static const struct drm_plane_funcs sti_gdp_plane_helpers_funcs = {
.update_plane = sti_plane_update_plane,
.disable_plane = sti_plane_disable_plane,
.destroy = sti_gdp_destroy,
- .set_property = drm_atomic_helper_plane_set_property,
+ .set_property = sti_plane_set_property,
.reset = sti_plane_reset,
.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
diff --git a/drivers/gpu/drm/sti/sti_hqvdp.c b/drivers/gpu/drm/sti/sti_hqvdp.c
index 65ca43f..3fd6f3a 100644
--- a/drivers/gpu/drm/sti/sti_hqvdp.c
+++ b/drivers/gpu/drm/sti/sti_hqvdp.c
@@ -1255,7 +1255,7 @@ static const struct drm_plane_funcs sti_hqvdp_plane_helpers_funcs = {
.update_plane = sti_plane_update_plane,
.disable_plane = sti_plane_disable_plane,
.destroy = sti_hqvdp_destroy,
- .set_property = drm_atomic_helper_plane_set_property,
+ .set_property = sti_plane_set_property,
.reset = sti_plane_reset,
.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
diff --git a/drivers/gpu/drm/sti/sti_plane.c b/drivers/gpu/drm/sti/sti_plane.c
index 22cf30d..c58fe1b 100644
--- a/drivers/gpu/drm/sti/sti_plane.c
+++ b/drivers/gpu/drm/sti/sti_plane.c
@@ -132,6 +132,60 @@ void sti_plane_init_property(struct sti_plane *plane,
plane->drm_plane.base.id, sti_plane_to_str(plane));
}
+int sti_plane_set_property(struct drm_plane *plane,
+ struct drm_property *property, uint64_t val)
+{
+ /*
+ * Forked from drm_atomic_helper_plane_set_property().
+ * Here we do not wait for vblank if the client is not atomic, so
+ * DRM_IOCTL_MODE_OBJ_SETPROPERTY returns before vblank.
+ */
+ struct drm_atomic_state *state;
+ struct drm_plane_state *plane_state;
+ struct sti_private *private = plane->dev->dev_private;
+ int ret = 0;
+
+ state = drm_atomic_state_alloc(plane->dev);
+ if (!state)
+ return -ENOMEM;
+
+ /* ->set_property is always called with all locks held. */
+ state->acquire_ctx = plane->dev->mode_config.acquire_ctx;
+retry:
+ plane_state = drm_atomic_get_plane_state(state, plane);
+ if (IS_ERR(plane_state)) {
+ ret = PTR_ERR(plane_state);
+ goto fail;
+ }
+
+ ret = drm_atomic_plane_set_property(plane, plane_state,
+ property, val);
+ if (ret)
+ goto fail;
+
+ if (!private->filp->atomic)
+ state->legacy_cursor_update = true;
+
+ ret = drm_atomic_commit(state);
+ if (ret != 0)
+ goto fail;
+
+ /* Driver takes ownership of state on successful commit. */
+ return 0;
+fail:
+ if (ret == -EDEADLK)
+ goto backoff;
+
+ drm_atomic_state_free(state);
+
+ return ret;
+backoff:
+ drm_atomic_state_clear(state);
+ drm_atomic_legacy_backoff(state);
+
+ goto retry;
+}
+
int sti_plane_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int crtc_x, int crtc_y,
diff --git a/drivers/gpu/drm/sti/sti_plane.h b/drivers/gpu/drm/sti/sti_plane.h
index 1372b9c..aa1b6ce 100644
--- a/drivers/gpu/drm/sti/sti_plane.h
+++ b/drivers/gpu/drm/sti/sti_plane.h
@@ -82,6 +82,8 @@ void sti_plane_update_fps(struct sti_plane *plane,
void sti_plane_init_property(struct sti_plane *plane,
enum drm_plane_type type);
+int sti_plane_set_property(struct drm_plane *plane,
+ struct drm_property *property, uint64_t val);
void sti_plane_reset(struct drm_plane *plane);
int sti_plane_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-01-03 16:57 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-03 16:56 [PATCH 0/5] drm/sti: do not sync legacy IOCTL on vblank if not ATOMIC Fabien Dessenne
2017-01-03 16:56 ` [PATCH 1/5] drm/sti: use atomic_helper for commit Fabien Dessenne
2017-01-03 16:56 ` [PATCH 2/5] drm/sti: add drm_file to sti_private Fabien Dessenne
2017-01-03 16:56 ` [PATCH 3/5] drm/sti: do not sync SETPLANE on vblank if not ATOMIC Fabien Dessenne
2017-01-03 16:56 ` Fabien Dessenne [this message]
2017-01-03 16:56 ` [PATCH 5/5] drm/sti: do not check hw scaling if mode is not set Fabien Dessenne
2017-01-04 9:18 ` [PATCH 0/5] drm/sti: do not sync legacy IOCTL on vblank if not ATOMIC Daniel Vetter
2017-01-05 15:23 ` Fabien DESSENNE
2017-01-09 10:03 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1483462612-29448-5-git-send-email-fabien.dessenne@st.com \
--to=fabien.dessenne@st.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=kernel@stlinux.com \
--cc=vincent.abriou@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox