From: Neil Armstrong <narmstrong@baylibre.com>
To: airlied@linux.ie
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
dri-devel@lists.freedesktop.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH v2 03/13] drm/meson: Add support for components
Date: Tue, 21 Mar 2017 16:25:40 +0100 [thread overview]
Message-ID: <1490109950-21421-4-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1490109950-21421-1-git-send-email-narmstrong@baylibre.com>
This patch adds support for optional components connected through the
Device Tree endpoints scheme.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_drv.c | 113 +++++++++++++++++++++++++++++++++-----
1 file changed, 99 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index bc562a0..a2e9f56 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
+#include <linux/component.h>
#include <linux/of_graph.h>
#include <drm/drmP.h>
@@ -150,9 +151,9 @@ static bool meson_vpu_has_available_connectors(struct device *dev)
.max_register = 0x1000,
};
-static int meson_drv_probe(struct platform_device *pdev)
+static int meson_drv_bind(struct device *dev)
{
- struct device *dev = &pdev->dev;
+ struct platform_device *pdev = to_platform_device(dev);
struct meson_drm *priv;
struct drm_device *drm;
struct resource *res;
@@ -215,6 +216,15 @@ static int meson_drv_probe(struct platform_device *pdev)
drm_vblank_init(drm, 1);
drm_mode_config_init(drm);
+ drm->mode_config.max_width = 3840;
+ drm->mode_config.max_height = 2160;
+ drm->mode_config.funcs = &meson_mode_config_funcs;
+
+ /* Hardware Initialization */
+
+ meson_venc_init(priv);
+ meson_vpp_init(priv);
+ meson_viu_init(priv);
/* Encoder Initialization */
@@ -222,11 +232,11 @@ static int meson_drv_probe(struct platform_device *pdev)
if (ret)
goto free_drm;
- /* Hardware Initialization */
-
- meson_venc_init(priv);
- meson_vpp_init(priv);
- meson_viu_init(priv);
+ ret = component_bind_all(drm->dev, drm);
+ if (ret) {
+ dev_err(drm->dev, "Couldn't bind all components\n");
+ goto free_drm;
+ }
ret = meson_plane_create(priv);
if (ret)
@@ -241,9 +251,6 @@ static int meson_drv_probe(struct platform_device *pdev)
goto free_drm;
drm_mode_config_reset(drm);
- drm->mode_config.max_width = 8192;
- drm->mode_config.max_height = 8192;
- drm->mode_config.funcs = &meson_mode_config_funcs;
priv->fbdev = drm_fbdev_cma_init(drm, 32,
drm->mode_config.num_connector);
@@ -268,9 +275,9 @@ static int meson_drv_probe(struct platform_device *pdev)
return ret;
}
-static int meson_drv_remove(struct platform_device *pdev)
+static void meson_drv_unbind(struct device *dev)
{
- struct drm_device *drm = dev_get_drvdata(&pdev->dev);
+ struct drm_device *drm = dev_get_drvdata(dev);
struct meson_drm *priv = drm->dev_private;
drm_dev_unregister(drm);
@@ -280,9 +287,88 @@ static int meson_drv_remove(struct platform_device *pdev)
drm_vblank_cleanup(drm);
drm_dev_unref(drm);
- return 0;
}
+static const struct component_master_ops meson_drv_master_ops = {
+ .bind = meson_drv_bind,
+ .unbind = meson_drv_unbind,
+};
+
+static int compare_of(struct device *dev, void *data)
+{
+ DRM_DEBUG_DRIVER("Comparing of node %s with %s\n",
+ of_node_full_name(dev->of_node),
+ of_node_full_name(data));
+
+ return dev->of_node == data;
+}
+
+/* Possible connectors nodes to ignore */
+static const struct of_device_id connectors_match[] = {
+ { .compatible = "composite-video-connector" },
+ { .compatible = "svideo-connector" },
+ { .compatible = "hdmi-connector" },
+ { .compatible = "dvi-connector" },
+ {}
+};
+
+static int meson_probe_remote(struct platform_device *pdev,
+ struct component_match **match,
+ struct device_node *parent,
+ struct device_node *remote)
+{
+ struct device_node *ep, *remote_node;
+ int count = 1;
+
+ /* If node is a connector, return and do not add to match table */
+ if (of_match_node(connectors_match, remote))
+ return 1;
+
+ component_match_add(&pdev->dev, match, compare_of, remote);
+
+ for_each_endpoint_of_node(remote, ep) {
+ remote_node = of_graph_get_remote_port_parent(ep);
+ if (!remote_node ||
+ remote_node == parent || /* Ignore parent endpoint */
+ !of_device_is_available(remote_node))
+ continue;
+
+ count += meson_probe_remote(pdev, match, remote, remote_node);
+
+ of_node_put(remote_node);
+ }
+
+ return count;
+}
+
+static int meson_drv_probe(struct platform_device *pdev)
+{
+ struct component_match *match = NULL;
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *ep, *remote;
+ int count = 0;
+
+ for_each_endpoint_of_node(np, ep) {
+ remote = of_graph_get_remote_port_parent(ep);
+ if (!remote || !of_device_is_available(remote))
+ continue;
+
+ count += meson_probe_remote(pdev, &match, np, remote);
+ }
+
+ /* If some endpoints were found, initialize the nodes */
+ if (count) {
+ dev_info(&pdev->dev, "Queued %d outputs on vpu\n", count);
+
+ return component_master_add_with_match(&pdev->dev,
+ &meson_drv_master_ops,
+ match);
+ }
+
+ /* If no output endpoints were available, simply bail out */
+ return 0;
+};
+
static const struct of_device_id dt_match[] = {
{ .compatible = "amlogic,meson-gxbb-vpu" },
{ .compatible = "amlogic,meson-gxl-vpu" },
@@ -293,7 +379,6 @@ static int meson_drv_remove(struct platform_device *pdev)
static struct platform_driver meson_drm_platform_driver = {
.probe = meson_drv_probe,
- .remove = meson_drv_remove,
.driver = {
.name = "meson-drm",
.of_match_table = dt_match,
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-03-21 15:25 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-21 15:25 [PATCH v2 00/13] drm/meson: Initial support for HDMI Output Neil Armstrong
2017-03-21 15:25 ` [PATCH v2 01/13] drm/meson: Use crtc_state for hdisplay and fix atomic flush/enable sync for vsync commit Neil Armstrong
2017-04-04 8:49 ` Daniel Vetter
2017-03-21 15:25 ` [PATCH v2 02/13] drm/meson: Add missing HDMI register Neil Armstrong
2017-03-21 15:25 ` Neil Armstrong [this message]
2017-04-04 8:59 ` [PATCH v2 03/13] drm/meson: Add support for components Daniel Vetter
2017-04-04 9:08 ` Neil Armstrong
2017-04-04 9:09 ` Daniel Vetter
2017-03-21 15:25 ` [PATCH v2 04/13] drm/meson: venc_cvbs: no more return -ENODEV if CVBS is not available Neil Armstrong
2017-03-21 15:25 ` [PATCH v2 05/13] drm/meson: add support for HDMI clock support Neil Armstrong
2017-03-21 15:25 ` [PATCH v2 06/13] drm/meson: Add support for HDMI venc modes and settings Neil Armstrong
2017-03-21 15:25 ` [PATCH v2 07/13] drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY Neil Armstrong
2017-04-04 8:57 ` Daniel Vetter
2017-04-04 9:16 ` Neil Armstrong
2017-04-04 13:50 ` Daniel Vetter
2017-03-21 15:25 ` [PATCH v2 08/13] ARM64: dts: meson-gx: Add shared CMA dma memory pool Neil Armstrong
2017-04-04 8:41 ` Neil Armstrong
2017-04-04 11:57 ` Kevin Hilman
2017-03-21 15:25 ` [PATCH v2 09/13] ARM64: dts: meson-gx: Add support for HDMI output Neil Armstrong
[not found] ` <1490109950-21421-10-git-send-email-narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-04-04 8:10 ` Neil Armstrong
2017-04-04 11:57 ` Kevin Hilman
[not found] ` <1490109950-21421-1-git-send-email-narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-03-21 15:25 ` [PATCH v2 10/13] dt-bindings: Add bindings for the Amlogic Meson dw-hdmi extension Neil Armstrong
2017-03-21 15:25 ` [PATCH v2 11/13] drm/meson: Convert existing documentation to actual kerneldoc Neil Armstrong
2017-03-21 15:25 ` [PATCH v2 12/13] drm/meson: Add RST to bring together kerneldoc Neil Armstrong
2017-04-04 9:00 ` Daniel Vetter
2017-04-04 9:17 ` Neil Armstrong
2017-03-21 15:25 ` [PATCH v2 13/13] MAINTAINERS: update files for Amlogic DRM Driver Neil Armstrong
2017-04-04 9:01 ` Daniel Vetter
2017-04-04 9:18 ` Neil Armstrong
2017-04-04 9:04 ` [PATCH v2 00/13] drm/meson: Initial support for HDMI Output Daniel Vetter
2017-04-04 9:21 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1490109950-21421-4-git-send-email-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).