[PATCH 10/11] drm/i915: prepare ycbcr420 modeset

[Shashank Sharma <shashank.sharma@intel.com>]

To get a ycbcr420 output from intel platforms, there are two
major steps:
- RGB->YCBCR conversion using a pipe CSC.
- Program PIPE_MISC register to generate a ycbcr420 output.
- Scaling down YCBCR444 samples to YCBCR420 samples using a pipe
  scaler.

This patch:
- Does scaler allocation for HDMI ycbcr420 outputs.
- Programs PIPE_MISC register for ycbcr420 output.
- Adds a new scaler user "HDMI output" to plug-into existing
  scaler framework. This output is identified with bit 30
  of the scaler users bitmap.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h      |  3 +++
 drivers/gpu/drm/i915/intel_atomic.c  |  6 ++++++
 drivers/gpu/drm/i915/intel_display.c | 34 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h     | 10 +++++++++-
 drivers/gpu/drm/i915/intel_hdmi.c    | 11 +++++++++++
 drivers/gpu/drm/i915/intel_panel.c   |  3 ++-
 6 files changed, 65 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 11b12f4..ecf28df 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -5024,6 +5024,9 @@ enum {
 
 #define _PIPE_MISC_A			0x70030
 #define _PIPE_MISC_B			0x71030
+#define   PIPEMISC_YCBCR420_ENABLE	(1<<27)
+#define   PIPEMISC_YCBCR420_MODE_BLEND	(1<<26)
+#define   PIPEMISC_OUTPUT_YCBCR		(1<<11)
 #define   PIPEMISC_DITHER_BPC_MASK	(7<<5)
 #define   PIPEMISC_DITHER_8_BPC		(0<<5)
 #define   PIPEMISC_DITHER_10_BPC	(1<<5)
diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
index 50fb1f7..592b0d2 100644
--- a/drivers/gpu/drm/i915/intel_atomic.c
+++ b/drivers/gpu/drm/i915/intel_atomic.c
@@ -187,6 +187,12 @@ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
 
 			/* panel fitter case: assign as a crtc scaler */
 			scaler_id = &scaler_state->scaler_id;
+		} else if (i == SKL_HDMI_OUTPUT_INDEX) {
+			name = "HDMI-OUTPUT";
+			idx = intel_crtc->base.base.id;
+
+			/* hdmi output case: needs a pipe scaler */
+			scaler_id = &scaler_state->scaler_id;
 		} else {
 			name = "PLANE";
 
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b03e5f3..5c4b342 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4611,6 +4611,11 @@ skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
 		(src_h != dst_w || src_w != dst_h):
 		(src_w != dst_w || src_h != dst_h);
 
+	if (crtc_state->hdmi_output == DRM_HDMI_OUTPUT_YCBCR420
+		&& scaler_user == SKL_HDMI_OUTPUT_INDEX)
+		/* YCBCR 444 -> 420 conversion needs a scaler */
+		need_scaling = true;
+
 	/*
 	 * if plane is being disabled or scaler is no more required or force detach
 	 *  - free scaler binded to this plane/crtc
@@ -4658,6 +4663,26 @@ skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
 }
 
 /**
+ * skl_update_scaler_hdmi_output - Stages update to scaler state for HDMI.
+ * HDMI YCBCR 420 output needs a scaler, for downsampling.
+ *
+ * @state: crtc's scaler state
+ *
+ * Return
+ *     0 - scaler_usage updated successfully
+ *    error - requested scaling cannot be supported or other error condition
+ */
+int skl_update_scaler_crtc_hdmi_output(struct intel_crtc_state *state)
+{
+	const struct drm_display_mode *mode = &state->base.adjusted_mode;
+
+	return skl_update_scaler(state, !state->base.active,
+		SKL_HDMI_OUTPUT_INDEX, &state->scaler_state.scaler_id,
+		DRM_ROTATE_0, state->pipe_src_w, state->pipe_src_h,
+		mode->crtc_hdisplay, mode->crtc_vdisplay);
+}
+
+/**
  * skl_update_scaler_crtc - Stages update to scaler state for a given crtc.
  *
  * @state: crtc's scaler state
@@ -8053,6 +8078,7 @@ static void haswell_set_pipemisc(struct drm_crtc *crtc)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	enum drm_hdmi_output_type hdmi_out = intel_crtc->config->hdmi_output;
 
 	if (IS_BROADWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 9) {
 		u32 val = 0;
@@ -8078,6 +8104,14 @@ static void haswell_set_pipemisc(struct drm_crtc *crtc)
 		if (intel_crtc->config->dither)
 			val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
 
+		if (hdmi_out) {
+			val |= PIPEMISC_OUTPUT_YCBCR;
+			if (hdmi_out == DRM_HDMI_OUTPUT_YCBCR420) {
+				val |= PIPEMISC_YCBCR420_ENABLE |
+				       PIPEMISC_YCBCR420_MODE_BLEND;
+			}
+		}
+
 		I915_WRITE(PIPEMISC(intel_crtc->pipe), val);
 	}
 }
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 98902d4..2a336d7 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -454,7 +454,8 @@ struct intel_crtc_scaler_state {
 	 *
 	 *     If a bit is set, a user is using a scaler.
 	 *     Here user can be a plane or crtc as defined below:
-	 *       bits 0-30 - plane (bit position is index from drm_plane_index)
+	 *       bits 0-29 - plane (bit position is index from drm_plane_index)
+	 *       bit 30    - hdmi output
 	 *       bit 31    - crtc
 	 *
 	 * Instead of creating a new index to cover planes and crtc, using
@@ -467,6 +468,12 @@ struct intel_crtc_scaler_state {
 	 * avilability.
 	 */
 #define SKL_CRTC_INDEX 31
+
+	/*
+	 * HDMI YCBCR 420 output consume a scaler. So adding a user
+	 * for HDMI output 420 requirement.
+	 */
+#define SKL_HDMI_OUTPUT_INDEX 30
 	unsigned scaler_users;
 
 	/* scaler used by crtc for panel fitting purpose */
@@ -1450,6 +1457,7 @@ void intel_mode_from_pipe_config(struct drm_display_mode *mode,
 				 struct intel_crtc_state *pipe_config);
 
 int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
+int skl_update_scaler_crtc_hdmi_output(struct intel_crtc_state *state);
 int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state);
 
 static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state *state)
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 40d3414..f0826a5 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1412,6 +1412,7 @@ intel_hdmi_compute_ycbcr_config(struct drm_connector_state *conn_state,
 {
 	struct drm_connector *connector = conn_state->connector;
 	struct drm_display_info *info = &connector->display_info;
+	struct intel_crtc *intel_crtc = to_intel_crtc(conn_state->crtc);
 	struct drm_display_mode *mode = &config->base.adjusted_mode;
 	enum drm_hdmi_output_type type = conn_state->hdmi_output;
 
@@ -1455,6 +1456,16 @@ intel_hdmi_compute_ycbcr_config(struct drm_connector_state *conn_state,
 		config->port_clock /= 2;
 		*clock_12bpc /= 2;
 		*clock_8bpc /= 2;
+
+		/* ycbcr 420 output conversion needs a scaler */
+		if (skl_update_scaler_crtc_hdmi_output(config)) {
+			DRM_ERROR("Scaler allocation for output failed\n");
+			return DRM_HDMI_OUTPUT_INVALID;
+		}
+
+		/* Bind this scaler to pipe */
+		intel_pch_panel_fitting(intel_crtc, config,
+					DRM_MODE_SCALE_FULLSCREEN);
 		break;
 
 	case DRM_HDMI_OUTPUT_YCBCR422:
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index cb50c52..b20aa1e 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -110,7 +110,8 @@ intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
 
 	/* Native modes don't need fitting */
 	if (adjusted_mode->crtc_hdisplay == pipe_config->pipe_src_w &&
-	    adjusted_mode->crtc_vdisplay == pipe_config->pipe_src_h)
+	    adjusted_mode->crtc_vdisplay == pipe_config->pipe_src_h &&
+	    pipe_config->hdmi_output != DRM_HDMI_OUTPUT_YCBCR420)
 		goto done;
 
 	switch (fitting_mode) {
-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel