From: Uma Shankar <uma.shankar@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Cc: Uma Shankar <uma.shankar@intel.com>,
ville.syrjala@intel.com, maarten.lankhorst@intel.com
Subject: [RFC 1/7] drm: Add Plane Degamma properties
Date: Tue, 7 Nov 2017 17:36:25 +0530 [thread overview]
Message-ID: <1510056391-9684-2-git-send-email-uma.shankar@intel.com> (raw)
In-Reply-To: <1510056391-9684-1-git-send-email-uma.shankar@intel.com>
Add Plane Degamma as a blob property and plane
degamma size as a range property.
v2: Rebase
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
---
drivers/gpu/drm/drm_atomic.c | 12 ++++++++++++
drivers/gpu/drm/drm_atomic_helper.c | 6 ++++++
drivers/gpu/drm/drm_mode_config.c | 14 ++++++++++++++
include/drm/drm_mode_config.h | 11 +++++++++++
include/drm/drm_plane.h | 10 ++++++++++
5 files changed, 53 insertions(+)
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 7e0e7be..30853c7 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -713,6 +713,8 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
{
struct drm_device *dev = plane->dev;
struct drm_mode_config *config = &dev->mode_config;
+ bool replaced = false;
+ int ret;
if (property == config->prop_fb_id) {
struct drm_framebuffer *fb = drm_framebuffer_lookup(dev, NULL, val);
@@ -758,6 +760,12 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
} else if (plane->funcs->atomic_set_property) {
return plane->funcs->atomic_set_property(plane, state,
property, val);
+ } else if (property == config->plane_degamma_lut_property) {
+ ret = drm_atomic_replace_property_blob_from_id(dev,
+ &state->degamma_lut,
+ val, -1, &replaced);
+ state->color_mgmt_changed |= replaced;
+ return ret;
} else {
return -EINVAL;
}
@@ -816,6 +824,9 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
*val = state->zpos;
} else if (plane->funcs->atomic_get_property) {
return plane->funcs->atomic_get_property(plane, state, property, val);
+ } else if (property == config->plane_degamma_lut_property) {
+ *val = (state->degamma_lut) ?
+ state->degamma_lut->base.id : 0;
} else {
return -EINVAL;
}
@@ -953,6 +964,7 @@ static void drm_atomic_plane_print_state(struct drm_printer *p,
drm_printf(p, "\tcrtc-pos=" DRM_RECT_FMT "\n", DRM_RECT_ARG(&dest));
drm_printf(p, "\tsrc-pos=" DRM_RECT_FP_FMT "\n", DRM_RECT_FP_ARG(&src));
drm_printf(p, "\trotation=%x\n", state->rotation);
+ drm_printf(p, "\tcolor_mgmt_changed=%d\n", state->color_mgmt_changed);
if (plane->funcs->atomic_print_state)
plane->funcs->atomic_print_state(p, state);
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 71d712f..ba924cf 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -3395,6 +3395,10 @@ void __drm_atomic_helper_plane_duplicate_state(struct drm_plane *plane,
state->fence = NULL;
state->commit = NULL;
+
+ if (state->degamma_lut)
+ drm_property_blob_get(state->degamma_lut);
+ state->color_mgmt_changed = false;
}
EXPORT_SYMBOL(__drm_atomic_helper_plane_duplicate_state);
@@ -3439,6 +3443,8 @@ void __drm_atomic_helper_plane_destroy_state(struct drm_plane_state *state)
if (state->commit)
drm_crtc_commit_put(state->commit);
+
+ drm_property_blob_put(state->degamma_lut);
}
EXPORT_SYMBOL(__drm_atomic_helper_plane_destroy_state);
diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
index cda8bfa..118f6ac 100644
--- a/drivers/gpu/drm/drm_mode_config.c
+++ b/drivers/gpu/drm/drm_mode_config.c
@@ -348,6 +348,20 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)
return -ENOMEM;
dev->mode_config.modifiers_property = prop;
+ prop = drm_property_create(dev,
+ DRM_MODE_PROP_BLOB,
+ "PLANE_DEGAMMA_LUT", 0);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.plane_degamma_lut_property = prop;
+
+ prop = drm_property_create_range(dev,
+ DRM_MODE_PROP_IMMUTABLE,
+ "PLANE_DEGAMMA_LUT_SIZE", 0, UINT_MAX);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.plane_degamma_lut_size_property = prop;
+
return 0;
}
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 0b4ac2e..6ee2df6 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -718,6 +718,17 @@ struct drm_mode_config {
struct drm_property *gamma_lut_size_property;
/**
+ * @plane_degamma_lut_property: Optional Plane property to set the LUT
+ * used to convert the framebuffer's colors to linear gamma.
+ */
+ struct drm_property *plane_degamma_lut_property;
+ /**
+ * @plane_degamma_lut_size_property: Optional Plane property for the
+ * size of the degamma LUT as supported by the driver (read-only).
+ */
+ struct drm_property *plane_degamma_lut_size_property;
+
+ /**
* @suggested_x_property: Optional connector property with a hint for
* the position of the output on the host's screen.
*/
diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
index 069c4c8..d112c50 100644
--- a/include/drm/drm_plane.h
+++ b/include/drm/drm_plane.h
@@ -123,6 +123,14 @@ struct drm_plane_state {
*/
bool visible;
+ /* @degamma_lut:
+ *
+ * Lookup table for converting framebuffer pixel data before apply the
+ * color conversion matrix @ctm. See drm_plane_enable_color_mgmt(). The
+ * blob (if not NULL) is an array of &struct drm_color_lut.
+ */
+ struct drm_property_blob *degamma_lut;
+
/**
* @commit: Tracks the pending commit to prevent use-after-free conditions,
* and for async plane updates.
@@ -132,6 +140,8 @@ struct drm_plane_state {
struct drm_crtc_commit *commit;
struct drm_atomic_state *state;
+
+ bool color_mgmt_changed : 1;
};
static inline struct drm_rect
--
1.7.9.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-11-07 12:06 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-07 12:06 [PATCH 0/7] Add Plane Color Properties Uma Shankar
2017-11-07 12:06 ` Uma Shankar [this message]
2017-11-07 15:43 ` [Intel-gfx] [RFC 1/7] drm: Add Plane Degamma properties Emil Velikov
2017-11-07 17:49 ` Brian Starkey
2017-11-07 18:09 ` Brian Starkey
2017-11-09 12:55 ` Shankar, Uma
2017-11-07 12:06 ` [RFC 2/7] drm: Add Plane CTM property Uma Shankar
2017-11-07 17:39 ` Brian Starkey
2017-11-08 9:08 ` Shankar, Uma
2017-11-07 12:06 ` [RFC 3/7] drm: Add Plane Gamma properties Uma Shankar
2017-11-07 12:06 ` [RFC 4/7] drm: Define helper function for plane color enabling Uma Shankar
2017-11-07 12:06 ` [RFC 5/7] drm/i915: Enable plane color features Uma Shankar
2017-11-07 12:06 ` [RFC 6/7] drm/i915: Implement Plane Gamma for Bdw and Gen9 platforms Uma Shankar
2017-11-07 12:06 ` [RFC 7/7] drm/i915: Load plane color luts from atomic flip Uma Shankar
2017-11-07 16:13 ` [Intel-gfx] [PATCH 0/7] Add Plane Color Properties Daniel Stone
2017-11-10 8:37 ` Shankar, Uma
2017-11-13 10:30 ` [Intel-gfx] " Daniel Stone
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1510056391-9684-2-git-send-email-uma.shankar@intel.com \
--to=uma.shankar@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=maarten.lankhorst@intel.com \
--cc=ville.syrjala@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).