From: Sinan Kaya <okaya@codeaurora.org>
To: linux-pci@vger.kernel.org, timur@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Sinan Kaya <okaya@codeaurora.org>,
Ben Skeggs <bskeggs@redhat.com>, David Airlie <airlied@linux.ie>,
Ilia Mirkin <imirkin@alum.mit.edu>,
"open list:DRM DRIVER FOR NVIDIA GEFORCE/QUADRO GPUS"
<dri-devel@lists.freedesktop.org>,
"open list:DRM DRIVER FOR NVIDIA GEFORCE/QUADRO GPUS"
<nouveau@lists.freedesktop.org>,
open list <linux-kernel@vger.kernel.org>
Subject: [PATCH 10/30] drm/nouveau: deprecate pci_get_bus_and_slot()
Date: Wed, 22 Nov 2017 00:30:55 -0500 [thread overview]
Message-ID: <1511328675-21981-11-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1511328675-21981-1-git-send-email-okaya@codeaurora.org>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Use pci_get_domain_bus_and_slot() with a domain number of 0 where we can't
extract the domain number. Other places, use the actual domain number from
the device.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/gpu/drm/nouveau/dispnv04/arb.c | 3 ++-
drivers/gpu/drm/nouveau/dispnv04/hw.c | 6 ++++--
drivers/gpu/drm/nouveau/nouveau_drm.c | 3 ++-
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramnv1a.c | 2 +-
4 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/dispnv04/arb.c b/drivers/gpu/drm/nouveau/dispnv04/arb.c
index 90075b6..729d7d0 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/arb.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/arb.c
@@ -214,7 +214,8 @@ struct nv_sim_state {
(dev->pdev->device & 0xffff) == 0x01f0 /*CHIPSET_NFORCE2*/) {
uint32_t type;
- pci_read_config_dword(pci_get_bus_and_slot(0, 1), 0x7c, &type);
+ pci_read_config_dword(pci_get_domain_bus_and_slot(0, 0, 1),
+ 0x7c, &type);
sim_data.memory_type = (type >> 12) & 1;
sim_data.memory_width = 64;
diff --git a/drivers/gpu/drm/nouveau/dispnv04/hw.c b/drivers/gpu/drm/nouveau/dispnv04/hw.c
index b985990..4b35093 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/hw.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/hw.c
@@ -221,7 +221,8 @@
(dev->pdev->device & 0x0ff0) == CHIPSET_NFORCE) {
uint32_t mpllP;
- pci_read_config_dword(pci_get_bus_and_slot(0, 3), 0x6c, &mpllP);
+ pci_read_config_dword(pci_get_domain_bus_and_slot(0, 0, 3),
+ 0x6c, &mpllP);
mpllP = (mpllP >> 8) & 0xf;
if (!mpllP)
mpllP = 4;
@@ -232,7 +233,8 @@
(dev->pdev->device & 0xff0) == CHIPSET_NFORCE2) {
uint32_t clock;
- pci_read_config_dword(pci_get_bus_and_slot(0, 5), 0x4c, &clock);
+ pci_read_config_dword(pci_get_domain_bus_and_slot(0, 0, 5),
+ 0x4c, &clock);
return clock / 1000;
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index 595630d..0b6c639 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -406,7 +406,8 @@ static int nouveau_drm_probe(struct pci_dev *pdev,
}
/* subfunction one is a hdmi audio device? */
- drm->hdmi_device = pci_get_bus_and_slot((unsigned int)pdev->bus->number,
+ drm->hdmi_device = pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus),
+ (unsigned int)pdev->bus->number,
PCI_DEVFN(PCI_SLOT(pdev->devfn), 1));
if (!drm->hdmi_device) {
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramnv1a.c b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramnv1a.c
index 3c6a871..3d2a203 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramnv1a.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramnv1a.c
@@ -29,7 +29,7 @@
struct pci_dev *bridge;
u32 mem, mib;
- bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 1));
+ bridge = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0, 1));
if (!bridge) {
nvkm_error(&fb->subdev, "no bridge device\n");
return -ENODEV;
--
1.9.1
prev parent reply other threads:[~2017-11-22 5:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1511328675-21981-1-git-send-email-okaya@codeaurora.org>
2017-11-22 5:30 ` [PATCH 09/30] drm/i915: deprecate pci_get_bus_and_slot() Sinan Kaya
2017-11-22 5:30 ` Sinan Kaya [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1511328675-21981-11-git-send-email-okaya@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=airlied@linux.ie \
--cc=bskeggs@redhat.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=imirkin@alum.mit.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=nouveau@lists.freedesktop.org \
--cc=timur@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox