From: CK Hu <ck.hu@mediatek.com>
To: Bibby Hsieh <bibby.hsieh@mediatek.com>
Cc: linux-kernel@vger.kernel.org,
Sascha Hauer <kernel@pengutronix.de>,
chunhui dai <chunhui.dai@mediatek.com>,
David Airlie <airlied@linux.ie>,
Daniel Vetter <daniel.vetter@ffwll.ch>,
Cawa Cheng <cawa.cheng@mediatek.com>,
dri-devel@lists.freedesktop.org,
Mao Huang <littlecvr@chromium.org>,
Thierry Reding <thierry.reding@gmail.com>,
linux-mediatek@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>,
Yingjoe Chen <yingjoe.chen@mediatek.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v1 3/7] drm/mediatek: add dpi driver for mt2701 and mt7623
Date: Mon, 28 May 2018 17:11:28 +0800 [thread overview]
Message-ID: <1527498688.14913.5.camel@mtksdaap41> (raw)
In-Reply-To: <20180514075243.5442-4-bibby.hsieh@mediatek.com>
Hi, Bibby:
On Mon, 2018-05-14 at 15:52 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
>
> This patch adds dpi driver suppot for both mt2701 and mt7623.
> And also support other (existing or future) chips that use
> the same binding and driver.
>
> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 24 ++++++++++++++++++++++--
> drivers/gpu/drm/mediatek/mtk_drm_drv.c | 1 +
> 2 files changed, 23 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 2b8b34c72697..e1af1d0d213d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -640,8 +640,7 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
> }
> drm_encoder_helper_add(&dpi->encoder, &mtk_dpi_encoder_helper_funcs);
>
> - /* Currently DPI0 is fixed to be driven by OVL1 */
> - dpi->encoder.possible_crtcs = BIT(1);
> + dpi->encoder.possible_crtcs = BIT(0) | BIT(1);
This modification influence not only mt2701, but also mt8173. So move
this to an independent patch.
Regards,
CK
> dpi->encoder.bridge->encoder = &dpi->encoder;
> ret = drm_bridge_attach(&dpi->encoder, dpi->encoder.bridge, NULL);
> if (ret) {
> @@ -690,12 +689,33 @@ static unsigned int mt8173_calculate_factor(int clock)
> return 2 * 3;
> }
>
> +static unsigned int mt2701_calculate_factor(int clock)
> +{
> + if (clock <= 64000)
> + return 16;
> + else if (clock <= 128000)
> + return 8;
> + else if (clock <= 256000)
> + return 4;
> + else
> + return 2;
> +}
> +
> static const struct mtk_dpi_conf mt8173_conf = {
> .cal_factor = mt8173_calculate_factor,
> .reg_h_fre_con = 0xe0,
> };
>
> +static const struct mtk_dpi_conf mt2701_conf = {
> + .cal_factor = mt2701_calculate_factor,
> + .reg_h_fre_con = 0xb0,
> + .edge_sel_en = true,
> +};
> +
> static const struct of_device_id mtk_dpi_of_ids[] = {
> + { .compatible = "mediatek,mt2701-dpi",
> + .data = &mt2701_conf,
> + },
> { .compatible = "mediatek,mt8173-dpi",
> .data = &mt8173_conf,
> },
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index a2ca90fc403c..f4fb86ab7b8d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -372,6 +372,7 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
> { .compatible = "mediatek,mt8173-disp-ufoe", .data = (void *)MTK_DISP_UFOE },
> { .compatible = "mediatek,mt2701-dsi", .data = (void *)MTK_DSI },
> { .compatible = "mediatek,mt8173-dsi", .data = (void *)MTK_DSI },
> + { .compatible = "mediatek,mt2701-dpi", .data = (void *)MTK_DPI },
> { .compatible = "mediatek,mt8173-dpi", .data = (void *)MTK_DPI },
> { .compatible = "mediatek,mt2701-disp-mutex", .data = (void *)MTK_DISP_MUTEX },
> { .compatible = "mediatek,mt8173-disp-mutex", .data = (void *)MTK_DISP_MUTEX },
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2018-05-28 9:11 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-14 7:52 [PATCH v1 0/7] drm/mediatek: support hdmi output for mt2701 and mt7623 Bibby Hsieh
2018-05-14 7:52 ` [PATCH v1 1/7] drm/mediatek: move dpi private data to device Bibby Hsieh
2018-05-28 8:25 ` CK Hu
2018-05-14 7:52 ` [PATCH v1 2/7] drm/mediatek: fix to get right bridge for dpi encoder Bibby Hsieh
2018-05-28 8:30 ` CK Hu
2018-05-14 7:52 ` [PATCH v1 3/7] drm/mediatek: add dpi driver for mt2701 and mt7623 Bibby Hsieh
2018-05-28 9:11 ` CK Hu [this message]
2018-05-14 7:52 ` [PATCH v1 4/7] drm/mediatek: add hdmi driver for different hardware Bibby Hsieh
2018-05-28 8:32 ` CK Hu
2018-05-14 7:52 ` [PATCH v1 5/7] drm/mediatek: implement connection from BLS to DPI0 Bibby Hsieh
2018-05-28 9:05 ` CK Hu
2018-05-14 7:52 ` [PATCH v1 6/7] drm/mediatek: add a error return value when clock driver has been prepared Bibby Hsieh
2018-05-28 9:12 ` CK Hu
2018-05-14 7:52 ` [PATCH v1 7/7] drm/mediatek: config component output by device node port Bibby Hsieh
2018-05-28 8:38 ` CK Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1527498688.14913.5.camel@mtksdaap41 \
--to=ck.hu@mediatek.com \
--cc=airlied@linux.ie \
--cc=bibby.hsieh@mediatek.com \
--cc=cawa.cheng@mediatek.com \
--cc=chunhui.dai@mediatek.com \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=littlecvr@chromium.org \
--cc=matthias.bgg@gmail.com \
--cc=thierry.reding@gmail.com \
--cc=yingjoe.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).