From: Ulrich Hecht <uli+renesas@fpond.eu>
To: laurent.pinchart@ideasonboard.com
Cc: linux-renesas-soc@vger.kernel.org,
kieran.bingham+renesas@ideasonboard.com,
jacopo+renesas@jmondi.org, Ulrich Hecht <uli+renesas@fpond.eu>,
dri-devel@lists.freedesktop.org
Subject: [PROTO][PATCH 00/10] R-Car D3 LVDS/HDMI support (with PLL)
Date: Tue, 14 Aug 2018 15:49:54 +0200 [thread overview]
Message-ID: <1534254604-24204-1-git-send-email-uli+renesas@fpond.eu> (raw)
Hi!
This is a prototype extension of the series "R-Car D3 LVDS/HDMI support"
that includes an up-port of the LVDS PLL support in the BSP.
While this is prototype-quality code, there are in my judgment no serious
hacks in it. The most significant deviation in behavior between this and
the BSP code is that the LVDS PLL setup is not done in two steps, but in one
go as the LVDS device is enabled. This was easier to implement, and works
just as fine.
Instructions for testing this are found at
https://elinux.org/User:Uli/D3_HDMI_Test, including links to git trees based
on renesas-drivers and drm-next, as well as config files for each.
CU
Uli
Jacopo Mondi (1):
drm: rcar-du: lvds: Handle LVDS interface reset
Kieran Bingham (1):
arm64: dts: renesas: r8a77995: Add LVDS support
Koji Matsuoka (5):
drm: rcar-du: Add clk_set_rate for external clock device
drm: rcar-du: Fix digital RGB routing for R8A77995
drm/bridge: adv7511: Add max-clock, min-vrefresh options
drm: rcar-du: Fix procedure for extal and dotclkin selection
arm64: dts: r8a77995-draak: set external clock for DU
Ulrich Hecht (3):
drm: rcar-du: Add r8a77995 device support
drm: rcar-du: lvds: LVDS PLL support
arm64: dts: renesas: r8a77995-draak: add HDMI output
arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 92 +++++++++-
arch/arm64/boot/dts/renesas/r8a77995.dtsi | 56 ++++++
drivers/gpu/drm/bridge/adv7511/adv7511.h | 7 +
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 22 +++
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 33 ++--
drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 4 +
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 28 +++
drivers/gpu/drm/rcar-du/rcar_du_drv.h | 4 +
drivers/gpu/drm/rcar-du/rcar_du_group.c | 18 +-
drivers/gpu/drm/rcar-du/rcar_lvds.c | 227 +++++++++++++++++++++++++
drivers/gpu/drm/rcar-du/rcar_lvds_regs.h | 44 ++++-
11 files changed, 517 insertions(+), 18 deletions(-)
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2018-08-14 13:50 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-14 13:49 Ulrich Hecht [this message]
2018-08-14 13:49 ` [PROTO][PATCH 01/10] drm: rcar-du: Add clk_set_rate for external clock device Ulrich Hecht
2018-08-20 10:10 ` Laurent Pinchart
2018-08-14 13:49 ` [PROTO][PATCH 02/10] drm: rcar-du: Add r8a77995 device support Ulrich Hecht
2018-08-20 8:39 ` Laurent Pinchart
2018-08-14 13:49 ` [PROTO][PATCH 03/10] drm: rcar-du: Fix digital RGB routing for R8A77995 Ulrich Hecht
2018-08-20 9:25 ` Laurent Pinchart
2018-08-14 13:49 ` [PROTO][PATCH 04/10] drm: rcar-du: lvds: LVDS PLL support Ulrich Hecht
2018-08-20 10:48 ` Laurent Pinchart
2018-08-14 13:49 ` [PROTO][PATCH 05/10] drm/bridge: adv7511: Add max-clock, min-vrefresh options Ulrich Hecht
2018-08-20 9:28 ` Laurent Pinchart
2018-08-21 8:03 ` Ulrich Hecht
2018-08-21 8:09 ` Laurent Pinchart
2018-08-22 9:13 ` Ulrich Hecht
2018-08-22 14:00 ` Laurent Pinchart
2018-08-14 13:50 ` [PROTO][PATCH 06/10] drm: rcar-du: Fix procedure for extal and dotclkin selection Ulrich Hecht
2018-08-20 9:40 ` Laurent Pinchart
2018-08-14 13:50 ` [PROTO][PATCH 07/10] arm64: dts: r8a77995-draak: set external clock for DU Ulrich Hecht
2018-08-20 10:51 ` Laurent Pinchart
2018-08-14 13:50 ` [PROTO][PATCH 08/10] drm: rcar-du: lvds: Handle LVDS interface reset Ulrich Hecht
2018-08-14 13:50 ` [PROTO][PATCH 09/10] arm64: dts: renesas: r8a77995: Add LVDS support Ulrich Hecht
2018-08-14 13:50 ` [PROTO][PATCH 10/10] arm64: dts: renesas: r8a77995-draak: add HDMI output Ulrich Hecht
2018-08-20 11:01 ` Laurent Pinchart
2018-08-20 9:50 ` [PROTO][PATCH 00/10] R-Car D3 LVDS/HDMI support (with PLL) Laurent Pinchart
2018-08-21 8:02 ` Ulrich Hecht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1534254604-24204-1-git-send-email-uli+renesas@fpond.eu \
--to=uli+renesas@fpond.eu \
--cc=dri-devel@lists.freedesktop.org \
--cc=jacopo+renesas@jmondi.org \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).