From: Sharat Masetty <smasetty-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
Sharat Masetty <smasetty-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: [v4 4/4] drm/msm/a6xx: Add devfreq support for a6xx
Date: Thu, 4 Oct 2018 15:11:43 +0530 [thread overview]
Message-ID: <1538646103-27445-5-git-send-email-smasetty@codeaurora.org> (raw)
In-Reply-To: <1538646103-27445-1-git-send-email-smasetty-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Implement routines to estimate GPU busy time and fetching the
current frequency for the polling interval. This is required by
the devfreq framework which recommends a frequency change if needed.
The driver code then tries to set this new frequency on the GPU by
sending an Out Of Band(OOB) request to the GMU.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
---
drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 38 +++++++++++++++++++++++++++++++----
drivers/gpu/drm/msm/adreno/a6xx_gmu.h | 2 ++
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 27 +++++++++++++++++++++++++
drivers/gpu/drm/msm/adreno/a6xx_gpu.h | 3 ++-
4 files changed, 65 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
index 613d639..5b65873 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
@@ -61,7 +61,7 @@ static bool a6xx_gmu_gx_is_on(struct a6xx_gmu *gmu)
A6XX_GMU_SPTPRAC_PWR_CLK_STATUS_GX_HM_CLK_OFF));
}
-static int a6xx_gmu_set_freq(struct a6xx_gmu *gmu, int index)
+static void __a6xx_gmu_set_freq(struct a6xx_gmu *gmu, int index)
{
gmu_write(gmu, REG_A6XX_GMU_DCVS_ACK_OPTION, 0);
@@ -78,7 +78,37 @@ static int a6xx_gmu_set_freq(struct a6xx_gmu *gmu, int index)
a6xx_gmu_set_oob(gmu, GMU_OOB_DCVS_SET);
a6xx_gmu_clear_oob(gmu, GMU_OOB_DCVS_SET);
- return gmu_read(gmu, REG_A6XX_GMU_DCVS_RETURN);
+ ret = gmu_read(gmu, REG_A6XX_GMU_DCVS_RETURN);
+ if (ret)
+ dev_err(gmu->dev, "GMU set GPU frequency error: %d\n", ret);
+
+ gmu->freq = gmu->gpu_freqs[index];
+}
+
+void a6xx_gmu_set_freq(struct msm_gpu *gpu, unsigned long freq)
+{
+ struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
+ struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
+ struct a6xx_gmu *gmu = &a6xx_gpu->gmu;
+ u32 perf_index = 0;
+
+ if (freq == gmu->freq)
+ return;
+
+ for (perf_index = 0; perf_index < gmu->nr_gpu_freqs - 1; perf_index++)
+ if (freq == gmu->gpu_freqs[perf_index])
+ break;
+
+ __a6xx_gmu_set_freq(gmu, perf_index);
+}
+
+unsigned long a6xx_gmu_get_freq(struct msm_gpu *gpu)
+{
+ struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
+ struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
+ struct a6xx_gmu *gmu = &a6xx_gpu->gmu;
+
+ return gmu->freq;
}
static bool a6xx_gmu_check_idle_level(struct a6xx_gmu *gmu)
@@ -637,7 +667,7 @@ int a6xx_gmu_reset(struct a6xx_gpu *a6xx_gpu)
ret = a6xx_hfi_start(gmu, GMU_COLD_BOOT);
/* Set the GPU back to the highest power frequency */
- a6xx_gmu_set_freq(gmu, gmu->nr_gpu_freqs - 1);
+ __a6xx_gmu_set_freq(gmu, gmu->nr_gpu_freqs - 1);
out:
if (ret)
@@ -676,7 +706,7 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
ret = a6xx_hfi_start(gmu, status);
/* Set the GPU to the highest power frequency */
- a6xx_gmu_set_freq(gmu, gmu->nr_gpu_freqs - 1);
+ __a6xx_gmu_set_freq(gmu, gmu->nr_gpu_freqs - 1);
out:
/* Make sure to turn off the boot OOB request on error */
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.h b/drivers/gpu/drm/msm/adreno/a6xx_gmu.h
index f34630c..35f765a 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.h
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.h
@@ -74,6 +74,8 @@ struct a6xx_gmu {
unsigned long gmu_freqs[4];
u32 cx_arc_votes[4];
+ unsigned long freq;
+
struct a6xx_hfi_queue queues[2];
struct tasklet_struct hfi_tasklet;
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
index 5f36b8d..e4ac95f 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -7,6 +7,8 @@
#include "a6xx_gpu.h"
#include "a6xx_gmu.xml.h"
+#include <linux/devfreq.h>
+
static inline bool _a6xx_check_idle(struct msm_gpu *gpu)
{
struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
@@ -682,6 +684,8 @@ static int a6xx_pm_resume(struct msm_gpu *gpu)
gpu->needs_hw_init = true;
+ msm_gpu_resume_devfreq(gpu);
+
return ret;
}
@@ -690,6 +694,8 @@ static int a6xx_pm_suspend(struct msm_gpu *gpu)
struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
+ devfreq_suspend_device(gpu->devfreq.devfreq);
+
/*
* Make sure the GMU is idle before continuing (because some transitions
* may use VBIF
@@ -753,6 +759,24 @@ static void a6xx_destroy(struct msm_gpu *gpu)
kfree(a6xx_gpu);
}
+static unsigned long a6xx_gpu_busy(struct msm_gpu *gpu)
+{
+ struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
+ struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
+ u64 busy_cycles;
+ unsigned long busy_time;
+
+ busy_cycles = gmu_read64(&a6xx_gpu->gmu,
+ REG_A6XX_GMU_CX_GMU_POWER_COUNTER_XOCLK_0_L,
+ REG_A6XX_GMU_CX_GMU_POWER_COUNTER_XOCLK_0_H);
+
+ busy_time = ((busy_cycles - gpu->devfreq.busy_cycles) * 10) / 192;
+
+ gpu->devfreq.busy_cycles = busy_cycles;
+
+ return busy_time;
+}
+
static const struct adreno_gpu_funcs funcs = {
.base = {
.get_param = adreno_get_param,
@@ -768,6 +792,9 @@ static void a6xx_destroy(struct msm_gpu *gpu)
#if defined(CONFIG_DEBUG_FS) || defined(CONFIG_DEV_COREDUMP)
.show = a6xx_show,
#endif
+ .gpu_busy = a6xx_gpu_busy,
+ .gpu_get_freq = a6xx_gmu_get_freq,
+ .gpu_set_freq = a6xx_gmu_set_freq,
},
.get_timestamp = a6xx_get_timestamp,
};
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
index dd69e5b..4127dce 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
@@ -56,5 +56,6 @@ struct a6xx_gpu {
int a6xx_gmu_probe(struct a6xx_gpu *a6xx_gpu, struct device_node *node);
void a6xx_gmu_remove(struct a6xx_gpu *a6xx_gpu);
-
+void a6xx_gmu_set_freq(struct msm_gpu *gpu, unsigned long freq);
+unsigned long a6xx_gmu_get_freq(struct msm_gpu *gpu);
#endif /* __A6XX_GPU_H__ */
--
1.9.1
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
next prev parent reply other threads:[~2018-10-04 9:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-04 9:41 [v4 0/4] msm/drm: a6xx DCVS series Sharat Masetty
[not found] ` <1538646103-27445-1-git-send-email-smasetty-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-10-04 9:41 ` [v4 1/4] drm/msm: suspend devfreq on init Sharat Masetty
2018-10-04 9:41 ` [v4 2/4] drm/msm/a6xx: Add gmu_read64() register read op Sharat Masetty
2018-10-04 9:41 ` Sharat Masetty [this message]
[not found] ` <1538646103-27445-5-git-send-email-smasetty-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-10-04 14:52 ` [v4 4/4] drm/msm/a6xx: Add devfreq support for a6xx Jordan Crouse
2018-10-04 9:41 ` [v4 3/4] drm/msm: re-factor devfreq code Sharat Masetty
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1538646103-27445-5-git-send-email-smasetty@codeaurora.org \
--to=smasetty-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox