dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jeykumar Sankaran <jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
	Jeykumar Sankaran
	<jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
	robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Subject: [PATCH v5 4/5] drm/msm: clean up display thread
Date: Fri, 14 Dec 2018 15:57:54 -0800	[thread overview]
Message-ID: <1544831875-32566-4-git-send-email-jsanka@codeaurora.org> (raw)
In-Reply-To: <1544831875-32566-1-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>

Since there are no clients using these threads,
cleaning it up.

changes in v2:
	- switch all the dependent clients to use system wq
	  before removing the disp_threads (Sean Paul)
changes in v3:
	- none
changes in v4:
	- none
changes in v5:
	- Rebase on latest tip with [1] (Sean Paul)

[1] https://patchwork.freedesktop.org/patch/255105/

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
---
 drivers/gpu/drm/msm/msm_drv.c | 43 ++-----------------------------------------
 drivers/gpu/drm/msm/msm_drv.h |  1 -
 2 files changed, 2 insertions(+), 42 deletions(-)

diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index c61ce06..f7cb2c7 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -287,13 +287,8 @@ static int msm_drm_uninit(struct device *dev)
 		kfree(vbl_ev);
 	}
 
-	/* clean up display commit/event worker threads */
+	/* clean up event worker threads */
 	for (i = 0; i < priv->num_crtcs; i++) {
-		if (priv->disp_thread[i].thread) {
-			kthread_destroy_worker(&priv->disp_thread[i].worker);
-			priv->disp_thread[i].thread = NULL;
-		}
-
 		if (priv->event_thread[i].thread) {
 			kthread_destroy_worker(&priv->event_thread[i].worker);
 			priv->event_thread[i].thread = NULL;
@@ -551,26 +546,6 @@ static int msm_drm_init(struct device *dev, struct drm_driver *drv)
 	 */
 	param.sched_priority = 16;
 	for (i = 0; i < priv->num_crtcs; i++) {
-
-		/* initialize display thread */
-		priv->disp_thread[i].crtc_id = priv->crtcs[i]->base.id;
-		kthread_init_worker(&priv->disp_thread[i].worker);
-		priv->disp_thread[i].dev = ddev;
-		priv->disp_thread[i].thread =
-			kthread_run(kthread_worker_fn,
-				&priv->disp_thread[i].worker,
-				"crtc_commit:%d", priv->disp_thread[i].crtc_id);
-		ret = sched_setscheduler(priv->disp_thread[i].thread,
-							SCHED_FIFO, &param);
-		if (ret)
-			pr_warn("display thread priority update failed: %d\n",
-									ret);
-
-		if (IS_ERR(priv->disp_thread[i].thread)) {
-			DRM_DEV_ERROR(dev, "failed to create crtc_commit kthread\n");
-			priv->disp_thread[i].thread = NULL;
-		}
-
 		/* initialize event thread */
 		priv->event_thread[i].crtc_id = priv->crtcs[i]->base.id;
 		kthread_init_worker(&priv->event_thread[i].worker);
@@ -580,13 +555,6 @@ static int msm_drm_init(struct device *dev, struct drm_driver *drv)
 				&priv->event_thread[i].worker,
 				"crtc_event:%d", priv->event_thread[i].crtc_id);
 
-		/**
-		 * event thread should also run at same priority as disp_thread
-		 * because it is handling frame_done events. A lower priority
-		 * event thread and higher priority disp_thread can causes
-		 * frame_pending counters beyond 2. This can lead to commit
-		 * failure at crtc commit level.
-		 */
 		ret = sched_setscheduler(priv->event_thread[i].thread,
 							SCHED_FIFO, &param);
 		if (ret)
@@ -598,16 +566,9 @@ static int msm_drm_init(struct device *dev, struct drm_driver *drv)
 			priv->event_thread[i].thread = NULL;
 		}
 
-		if ((!priv->disp_thread[i].thread) ||
-				!priv->event_thread[i].thread) {
+		if (!priv->event_thread[i].thread) {
 			/* clean up previously created threads if any */
 			for ( ; i >= 0; i--) {
-				if (priv->disp_thread[i].thread) {
-					kthread_stop(
-						priv->disp_thread[i].thread);
-					priv->disp_thread[i].thread = NULL;
-				}
-
 				if (priv->event_thread[i].thread) {
 					kthread_stop(
 						priv->event_thread[i].thread);
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index 8fad151..2a30fc4 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -199,7 +199,6 @@ struct msm_drm_private {
 	unsigned int num_crtcs;
 	struct drm_crtc *crtcs[MAX_CRTCS];
 
-	struct msm_drm_thread disp_thread[MAX_CRTCS];
 	struct msm_drm_thread event_thread[MAX_CRTCS];
 
 	unsigned int num_encoders;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

  parent reply	other threads:[~2018-12-14 23:57 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-14 23:57 [PATCH v5 1/5] drm/msm/dpu: use kthread_destroy_worker to release msm workers Jeykumar Sankaran
     [not found] ` <1544831875-32566-1-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-12-14 23:57   ` [PATCH v5 2/5] drm/msm/dpu: use msm wq for vblank events Jeykumar Sankaran
2018-12-14 23:57   ` [PATCH v5 3/5] drm/msm/dpu: use msm wq for idle power collapse Jeykumar Sankaran
2018-12-14 23:57   ` Jeykumar Sankaran [this message]
2018-12-14 23:57   ` [PATCH v5 5/5] drm/msm: subclass work object for vblank events Jeykumar Sankaran

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1544831875-32566-4-git-send-email-jsanka@codeaurora.org \
    --to=jsanka-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
    --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
    --cc=jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox