From: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
To: dri-devel@lists.freedesktop.org, anitha.chrisanthus@intel.com,
bob.j.paauwe@intel.com, edmund.j.dea@intel.com
Cc: daniel.vetter@intel.com, intel-gfx@lists.freedesktop.org,
rodrigo.vivi@intel.com
Subject: [PATCH 20/59] drm/kmb: Register IRQ for LCD
Date: Tue, 30 Jun 2020 14:27:32 -0700 [thread overview]
Message-ID: <1593552491-23698-21-git-send-email-anitha.chrisanthus@intel.com> (raw)
In-Reply-To: <1593552491-23698-1-git-send-email-anitha.chrisanthus@intel.com>
This code is commented out until firmware is updated to
redirect LCD IRQ from MSSCPU to A53.
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
---
drivers/gpu/drm/kmb/kmb_drv.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/kmb/kmb_drv.c b/drivers/gpu/drm/kmb/kmb_drv.c
index a94d387..d35f1b2 100644
--- a/drivers/gpu/drm/kmb/kmb_drv.c
+++ b/drivers/gpu/drm/kmb/kmb_drv.c
@@ -48,12 +48,16 @@
#include "kmb_plane.h"
#include "kmb_dsi.h"
+/*IRQ handler*/
+static irqreturn_t kmb_isr(int irq, void *arg);
+
static int kmb_load(struct drm_device *drm, unsigned long flags)
{
struct kmb_drm_private *dev_p = drm->dev_private;
struct platform_device *pdev = to_platform_device(drm->dev);
/*struct resource *res;*/
/*u32 version;*/
+ /*int irq_lcd, irq_mipi; */
int ret;
/* TBD - not sure if clock_get needs to be called here */
@@ -104,6 +108,12 @@ static int kmb_load(struct drm_device *drm, unsigned long flags)
dev_p->msscam_mmio = ioremap_cache(MSS_CAM_BASE_ADDR,
MSS_CAM_MMIO_SIZE);
+ /*TODO - register irqs here - section 17.3 in databook
+ * lists LCD at 79 under MSS CPU - firmware has to redirect it to A53
+ * May be 33 for LCD and 34 for MIPI? Will wait till firmware
+ * finalizes the IRQ numbers for redirection
+ */
+
/*TBD read and check for correct product version here */
/* Get the optional framebuffer memory resource */
@@ -151,7 +161,7 @@ static void kmb_setup_mode_config(struct drm_device *drm)
drm->mode_config.funcs = &kmb_mode_config_funcs;
}
-static irqreturn_t kmb_irq(int irq, void *arg)
+static irqreturn_t kmb_isr(int irq, void *arg)
{
struct drm_device *dev = (struct drm_device *)arg;
unsigned long status, val;
@@ -196,8 +206,9 @@ DEFINE_DRM_GEM_CMA_FOPS(fops);
static struct drm_driver kmb_driver = {
.driver_features = DRIVER_HAVE_IRQ | DRIVER_GEM |
- DRIVER_MODESET | DRIVER_ATOMIC,
- .irq_handler = kmb_irq,
+ DRIVER_MODESET |
+ DRIVER_ATOMIC,
+ .irq_handler = kmb_isr,
.irq_preinstall = kmb_irq_reset,
.irq_uninstall = kmb_irq_reset,
.gem_free_object_unlocked = drm_gem_cma_free_object,
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-06-30 21:30 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-30 21:27 [PATCH 00/59] Add support for Keem Bay DRM driver Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 01/59] drm/kmb: Add support for KeemBay Display Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 02/59] drm/kmb: Added id to kmb_plane Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 03/59] drm/kmb: Set correct values in the LAYERn_CFG register Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 04/59] drm/kmb: Use biwise operators for register definitions Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 05/59] drm/kmb: Updated kmb_plane_atomic_check Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 06/59] drm/kmb: Initial check-in for Mipi DSI Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 07/59] drm/kmb: Set OUT_FORMAT_CFG register Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 08/59] drm/kmb: Added mipi_dsi_host initialization Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 09/59] drm/kmb: Part 1 of Mipi Tx Initialization Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 10/59] drm/kmb: Part 2 " Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 11/59] drm/kmb: Use correct mmio offset from data book Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 12/59] drm/kmb: Part3 of Mipi Tx initialization Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 13/59] drm/kmb: Part4 of Mipi Tx Initialization Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 14/59] drm/kmb: Correct address offsets for mipi registers Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 15/59] drm/kmb: Part5 of Mipi Tx Intitialization Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 16/59] drm/kmb: Part6 of Mipi Tx Initialization Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 17/59] drm/kmb: Part7 " Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 18/59] drm/kmb: Part8 " Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 19/59] drm/kmb: Added ioremap/iounmap for register access Anitha Chrisanthus
2020-06-30 21:27 ` Anitha Chrisanthus [this message]
2020-06-30 21:27 ` [PATCH 21/59] drm/kmb: IRQ handlers for LCD and mipi dsi Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 22/59] drm/kmb: Set hardcoded values to LCD_VSYNC_START Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 23/59] drm/kmb: Additional register programming to update_plane Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 24/59] drm/kmb: Add ADV7535 bridge Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 25/59] drm/kmb: Display clock enable/disable Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 26/59] drm/kmb: rebase to newer kernel version Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 27/59] drm/kmb: minor name change to match device tree Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 28/59] drm/kmb: Changed MMIO size Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 29/59] drm/kmb: Defer Probe Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 30/59] drm/kmb: call bridge init in the very beginning Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 31/59] drm/kmb: Cleanup probe functions Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 32/59] drm/kmb: Revert dsi_host back to a static variable Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 33/59] drm/kmb: Initialize clocks for clk_msscam, clk_mipi_ecfg, & clk_mipi_cfg Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 34/59] drm/kmb: Enable MSS_CAM_CLK_CTRL for LCD and MIPI Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 35/59] drm/kmb: Remove declaration of irq_lcd/irq_mipi Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 36/59] drm/kmb: Enable MIPI TX HS Test Pattern Generation Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 37/59] drm/kmb: Set MSS_CAM_RSTN_CTRL along with enable Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 38/59] drm/kmb: Mipi DPHY initialization changes Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 39/59] drm/kmb: Fixed driver unload Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 40/59] drm/kmb: Added LCD_TEST config Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 41/59] drm/kmb: Changes for LCD to Mipi Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 42/59] drm/kmb: Update LCD programming to match MIPI Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 43/59] drm/kmb: Changed name of driver to kmb-drm Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 44/59] drm/kmb: Mipi settings from input timings Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 45/59] drm/kmb: Enable LCD interrupts Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 46/59] drm/kmb: Enable LCD interrupts during modeset Anitha Chrisanthus
2020-06-30 21:27 ` [PATCH 47/59] drm/kmb: Don’t inadvertantly disable LCD controller Anitha Chrisanthus
2020-06-30 21:28 ` [PATCH 48/59] drm/kmb: SWAP R and B LCD Layer order Anitha Chrisanthus
2020-06-30 21:28 ` [PATCH 49/59] drm/kmb: Disable ping pong mode Anitha Chrisanthus
2020-06-30 21:28 ` [PATCH 50/59] drm/kmb: Do the layer initializations only once Anitha Chrisanthus
2020-06-30 21:28 ` [PATCH 51/59] drm/kmb: Write to LCD_LAYERn_CFG " Anitha Chrisanthus
2020-06-30 21:28 ` [PATCH 52/59] drm/kmb: Cleaned up code Anitha Chrisanthus
2020-06-30 21:28 ` [PATCH 53/59] drm/kmb: disable the LCD layer in EOF irq handler Anitha Chrisanthus
2020-06-30 21:28 ` [PATCH 54/59] drm/kmb: Initialize uninitialized variables Anitha Chrisanthus
2020-06-30 21:28 ` [PATCH 55/59] drm/kmb: Added useful messages in LCD ISR Anitha Chrisanthus
2020-06-30 21:28 ` [PATCH 56/59] kmb/drm: Prune unsupported modes Anitha Chrisanthus
2020-06-30 21:28 ` [PATCH 57/59] drm/kmb: workaround for dma undeflow issue Anitha Chrisanthus
2020-06-30 21:28 ` [PATCH 58/59] drm/kmb: Get System Clock from SCMI Anitha Chrisanthus
2020-06-30 21:28 ` [PATCH 59/59] drm/kmb: work around for planar formats Anitha Chrisanthus
2020-07-01 7:01 ` [PATCH 00/59] Add support for Keem Bay DRM driver Sam Ravnborg
2020-07-01 21:53 ` Chrisanthus, Anitha
2020-07-02 10:19 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1593552491-23698-21-git-send-email-anitha.chrisanthus@intel.com \
--to=anitha.chrisanthus@intel.com \
--cc=bob.j.paauwe@intel.com \
--cc=daniel.vetter@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=edmund.j.dea@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox