[PATCH v10 1/6] dt-bindings: display: Add support for Intel KeemBay Display

[Anitha Chrisanthus <anitha.chrisanthus@intel.com>]

This patch adds bindings for Intel KeemBay Display

v2: review changes from Rob Herring
v3: review changes from Sam Ravnborg (removed mipi dsi entries, and
    encoder entry, connect port to dsi)
    MSSCAM is part of the display submodule and its used to reset LCD
    and MIPI DSI clocks, so its best to be on this device tree.

Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
---
 .../bindings/display/intel,keembay-display.yaml    | 75 ++++++++++++++++++++++
 1 file changed, 75 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/intel,keembay-display.yaml

diff --git a/Documentation/devicetree/bindings/display/intel,keembay-display.yaml b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml
new file mode 100644
index 0000000..8a8effe
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/intel,keembay-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Devicetree bindings for Intel Keem Bay display controller
+
+maintainers:
+  - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
+  - Edmond J Dea <edmund.j.dea@intel.com>
+
+properties:
+  compatible:
+    const: intel,keembay-display
+
+  reg:
+    items:
+      - description: LCD registers range
+      - description: Msscam registers range
+
+  reg-names:
+    items:
+      - const: lcd
+      - const: msscam
+
+  clocks:
+    items:
+      - description: LCD controller clock
+      - description: pll0 clock
+
+  clock-names:
+    items:
+      - const: clk_lcd
+      - const: clk_pll0
+
+  interrupts:
+    maxItems: 1
+
+  port:
+    type: object
+    description: Display output node to DSI.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display@20930000 {
+        compatible = "intel,keembay-display";
+        reg = <0x20930000 0x3000>,
+              <0x20910000 0x30>;
+        reg-names = "lcd", "msscam";
+        interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&scmi_clk 0x83>,
+                 <&scmi_clk 0x0>;
+        clock-names = "clk_lcd", "clk_pll0";
+
+        port {
+            disp_out: endpoint {
+                remote-endpoint = <&dsi_in>;
+            };
+        };
+    };
-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel