From mboxrd@z Thu Jan 1 00:00:00 1970 From: Laurent Pinchart Subject: Re: [PATCH 09/10] phy: Add Cadence D-PHY support Date: Wed, 05 Sep 2018 16:48:27 +0300 Message-ID: <1838745.9zNmGlpGXc@avalon> References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7Bit Return-path: In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: Maxime Ripard Cc: Kishon Vijay Abraham I , Boris Brezillon , Thomas Petazzoni , linux-media@vger.kernel.org, Archit Taneja , Andrzej Hajda , Chen-Yu Tsai , linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-arm-kernel@lists.infradead.org, Krzysztof Witos , Rafal Ciepiela List-Id: dri-devel@lists.freedesktop.org Hi Maxime, Thank you for the patch. On Wednesday, 5 September 2018 12:16:40 EEST Maxime Ripard wrote: > Cadence has designed a D-PHY that can be used by the, currently in tree, > DSI bridge (DRM), CSI Transceiver and CSI Receiver (v4l2) drivers. > > Only the DSI driver has an ad-hoc driver for that phy at the moment, while > the v4l2 drivers are completely missing any phy support. In order to make > that phy support available to all these drivers, without having to > duplicate that code three times, let's create a generic phy framework > driver. > > Signed-off-by: Maxime Ripard > --- > drivers/phy/Kconfig | 1 +- > drivers/phy/Makefile | 1 +- > drivers/phy/cadence/Kconfig | 13 +- > drivers/phy/cadence/Makefile | 1 +- > drivers/phy/cadence/cdns-dphy.c | 499 +++++++++++++++++++++++++++++++++- Should the DT bindings be split from Documentation/devicetree/bindings/ display/bridge/cdns,dsi.txt ? > 5 files changed, 515 insertions(+) > create mode 100644 drivers/phy/cadence/Kconfig > create mode 100644 drivers/phy/cadence/Makefile > create mode 100644 drivers/phy/cadence/cdns-dphy.c [snip] -- Regards, Laurent Pinchart