From: bugzilla-daemon@freedesktop.org
To: dri-devel@lists.freedesktop.org
Subject: [Bug 36221] KMS with X1950 XT i2c error --> no ddc
Date: Thu, 14 Apr 2011 16:38:08 -0700 (PDT) [thread overview]
Message-ID: <20110414233809.0C05C13004F@annarchy.freedesktop.org> (raw)
In-Reply-To: <bug-36221-502@http.bugs.freedesktop.org/>
https://bugs.freedesktop.org/show_bug.cgi?id=36221
--- Comment #35 from revealed <revealed@freakmail.de> 2011-04-14 16:38:08 PDT ---
Seems to work fine!
disk@wild-thing:~> grep command /var/log/boot.msg
<5>[ 0.000000] Kernel command line: root=/dev/sdc6 resume=/dev/sdc5
splash=silent
disk@wild-thing:~> dmesg | grep i2c
[ 8.316773] ivtv0: Reopen i2c bus for IR-blaster support
[ 8.522473] cx25840 5-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
[ 8.656997] tuner 5-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[ 8.889160] wm8775 5-001b: chip found @ 0x36 (ivtv i2c driver #0)
[ 29.856130] input: i2c IR (Hauppauge WinTV PVR-150 as
/devices/virtual/rc/rc0/input6
[ 29.856207] rc0: i2c IR (Hauppauge WinTV PVR-150 as /devices/virtual/rc/rc0
[ 29.856210] ir-kbd-i2c: i2c IR (Hauppauge WinTV PVR-150 detected at
i2c-5/5-0071/ir0 [ivtv i2c driver #0]
disk@wild-thing:~> dmesg | grep drm
[ 2.461044] [drm] Initialized drm 1.1.0 20060810
[ 2.513747] [drm] radeon defaulting to kernel modesetting.
[ 2.513801] [drm] radeon kernel modesetting enabled.
[ 2.515575] [drm] initializing kernel modesetting (R580 0x1002:0x7240).
[ 2.515685] [drm] register mmio base: 0xFF7F0000
[ 2.515733] [drm] register mmio size: 65536
[ 2.517031] [drm] Generation 2 PCI interface, using max accessible memory
[ 2.517335] [drm] radeon: irq initialized.
[ 2.517455] [drm] Detected VRAM RAM=512M, BAR=256M
[ 2.517502] [drm] RAM width 256bits DDR
[ 2.517739] [drm] radeon: 512M of VRAM memory ready
[ 2.517786] [drm] radeon: 512M of GTT memory ready.
[ 2.517845] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.519502] [drm] radeon: 4 quad pipes, 1 z pipes initialized.
[ 2.520495] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 2.520643] [drm] Loading R500 Microcode
[ 2.522154] [drm] radeon: ring at 0x0000000020001000
[ 2.522225] [drm] ring test succeeded in 3 usecs
[ 2.522411] [drm] radeon: ib pool ready.
[ 2.522519] [drm] ib test succeeded in 0 usecs
[ 2.523408] [drm] Radeon Display Connectors
[ 2.523456] [drm] Connector 0:
[ 2.523502] [drm] DVI-I
[ 2.523568] [drm] HPD2
[ 2.523621] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c
0x7e4c
[ 2.523709] [drm] Encoders:
[ 2.523762] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.523809] [drm] DFP3: INTERNAL_LVTM1
[ 2.523874] [drm] Connector 1:
[ 2.523926] [drm] S-video
[ 2.523972] [drm] Encoders:
[ 2.524050] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 2.524104] [drm] Connector 2:
[ 2.524150] [drm] DVI-I
[ 2.524214] [drm] HPD1
[ 2.524267] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c
0x7e5c
[ 2.524354] [drm] Encoders:
[ 2.524407] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 2.524454] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 2.636077] [drm] Possible lm64 thermal controller at 0x18
[ 2.636172] [drm] radeon: power management initialized
[ 2.762666] [drm] fb mappable at 0xC00C0000
[ 2.762722] [drm] vram apper at 0xC0000000
[ 2.762775] [drm] size 9216000
[ 2.762827] [drm] fb depth is 24
[ 2.762879] [drm] pitch is 7680
[ 2.775905] fb0: radeondrmfb frame buffer device
[ 2.775926] drm: registered panic notifier
[ 2.775949] [drm] Initialized radeon 2.7.0 20080528 for 0000:01:00.0 on
minor 0
--
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
next prev parent reply other threads:[~2011-04-14 23:38 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-13 20:41 [Bug 36221] New: KMS with X1950 XT i2c error --> no ddc bugzilla-daemon
2011-04-13 20:41 ` [Bug 36221] " bugzilla-daemon
2011-04-13 20:43 ` bugzilla-daemon
2011-04-14 16:23 ` bugzilla-daemon
2011-04-14 16:44 ` bugzilla-daemon
2011-04-14 16:58 ` bugzilla-daemon
2011-04-14 17:30 ` bugzilla-daemon
2011-04-14 17:48 ` bugzilla-daemon
2011-04-14 17:58 ` bugzilla-daemon
2011-04-14 18:03 ` bugzilla-daemon
2011-04-14 18:05 ` bugzilla-daemon
2011-04-14 18:06 ` bugzilla-daemon
2011-04-14 18:10 ` bugzilla-daemon
2011-04-14 18:14 ` bugzilla-daemon
2011-04-14 19:37 ` bugzilla-daemon
2011-04-14 20:13 ` bugzilla-daemon
2011-04-14 21:03 ` bugzilla-daemon
2011-04-14 21:22 ` bugzilla-daemon
2011-04-14 21:28 ` bugzilla-daemon
2011-04-14 21:34 ` bugzilla-daemon
2011-04-14 21:39 ` bugzilla-daemon
2011-04-14 21:41 ` bugzilla-daemon
2011-04-14 21:44 ` bugzilla-daemon
2011-04-14 22:05 ` bugzilla-daemon
2011-04-14 22:16 ` bugzilla-daemon
2011-04-14 22:20 ` bugzilla-daemon
2011-04-14 22:21 ` bugzilla-daemon
2011-04-14 22:27 ` bugzilla-daemon
2011-04-14 22:31 ` bugzilla-daemon
2011-04-14 22:31 ` bugzilla-daemon
2011-04-14 22:37 ` bugzilla-daemon
2011-04-14 22:39 ` bugzilla-daemon
2011-04-14 23:05 ` bugzilla-daemon
2011-04-14 23:06 ` bugzilla-daemon
2011-04-14 23:09 ` bugzilla-daemon
2011-04-14 23:11 ` bugzilla-daemon
2011-04-14 23:33 ` bugzilla-daemon
2011-04-14 23:38 ` bugzilla-daemon [this message]
2011-04-14 23:44 ` bugzilla-daemon
2011-04-14 23:48 ` bugzilla-daemon
2011-04-14 23:52 ` bugzilla-daemon
2011-04-14 23:53 ` bugzilla-daemon
2011-04-14 23:58 ` bugzilla-daemon
2011-04-30 10:45 ` bugzilla-daemon
2011-04-30 15:17 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110414233809.0C05C13004F@annarchy.freedesktop.org \
--to=bugzilla-daemon@freedesktop.org \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox