From: bugzilla-daemon@freedesktop.org
To: dri-devel@lists.freedesktop.org
Subject: [Bug 31943] drm EDID checking is too strict
Date: Mon, 9 May 2011 01:58:31 -0700 (PDT) [thread overview]
Message-ID: <20110509085832.B700D13004F@annarchy.freedesktop.org> (raw)
In-Reply-To: <bug-31943-502@http.bugs.freedesktop.org/>
https://bugs.freedesktop.org/show_bug.cgi?id=31943
--- Comment #14 from Igor Strelnikoff <freiheits@mail.ru> 2011-05-09 01:58:31 PDT ---
RADEON 9800 PRO AGP
Monitor DVI: NEC LCD 225WNX
xrandr --verbose
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 4096 x 4096
VGA-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x51
Timestamp: 17179
Subpixel: no subpixels
Clones: DVI-0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
load detection: 1 (0x00000001) range: (0,1)
DVI-0 connected 1680x1050+0+0 (0x54) normal (normal left inverted right x axis
y axis) 433mm x 270mm
Identifier: 0x52
Timestamp: 17179
Subpixel: horizontal rgb
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones: VGA-0
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff0038a32f6701010101
1d120103802f1e78eaee95a3544c9926
0f5054bfef8081c0814081808bc09500
9040b300714f21399030621a274018b0
3640b10e1100001c000000fd00384b1f
5311000a202020202020000000fc004c
4344323235574e580a202020000000ff
00383732303231353459420a2020005f
load detection: 1 (0x00000001) range: (0,1)
1680x1050 (0x54) 146.2MHz -HSync +VSync *current +preferred
h: width 1680 start 1960 end 2136 total 2240 skew 0 clock 65.3KHz
v: height 1050 start 1053 end 1059 total 1089 clock 60.0Hz
1400x1050 (0x55) 121.8MHz -HSync +VSync
h: width 1400 start 1488 end 1632 total 1864 skew 0 clock 65.3KHz
v: height 1050 start 1053 end 1057 total 1089 clock 60.0Hz
1280x1024 (0x56) 135.0MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz
1280x1024 (0x57) 108.0MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1440x900 (0x58) 106.5MHz -HSync +VSync
h: width 1440 start 1520 end 1672 total 1904 skew 0 clock 55.9KHz
v: height 900 start 903 end 909 total 934 clock 59.9Hz
1280x960 (0x59) 108.0MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz
v: height 960 start 961 end 964 total 1000 clock 60.0Hz
1360x768 (0x5a) 84.8MHz -HSync +VSync
h: width 1366 start 1431 end 1567 total 1776 skew 0 clock 47.7KHz
v: height 768 start 771 end 781 total 798 clock 59.8Hz
1152x864 (0x5b) 108.0MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz
v: height 864 start 865 end 868 total 900 clock 75.0Hz
1280x720 (0x5c) 74.4MHz -HSync +VSync
h: width 1280 start 1336 end 1472 total 1664 skew 0 clock 44.7KHz
v: height 720 start 721 end 724 total 746 clock 60.0Hz
1024x768 (0x5d) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x5e) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x5f) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
832x624 (0x60) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x61) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x62) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x63) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x64) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x65) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 491 total 520 clock 72.8Hz
640x480 (0x66) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x67) 30.2MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz
v: height 480 start 483 end 486 total 525 clock 66.7Hz
640x480 (0x68) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0x69) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
S-video disconnected (normal left inverted right x axis y axis)
Identifier: 0x53
Timestamp: 17179
Subpixel: no subpixels
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
tv standard: ntsc
supported: ntsc pal pal-m pal-60
ntsc-j scart-pal pal-cn secam
load detection: 1 (0x00000001) range: (0,1)
--
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
next prev parent reply other threads:[~2011-05-09 8:58 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <bug-31943-502@http.bugs.freedesktop.org/>
2010-11-29 15:08 ` [Bug 31943] [drm:radeon_dvi_detect] *ERROR* HDMI Type A-1: probed a monitor but no|invalid EDID bugzilla-daemon
2010-11-29 15:09 ` bugzilla-daemon
2010-12-04 4:06 ` bugzilla-daemon
2010-12-13 15:32 ` [Bug 31943] drm EDID checking is too strict bugzilla-daemon
2011-01-04 23:04 ` bugzilla-daemon
2011-01-08 17:33 ` bugzilla-daemon
2011-01-08 17:37 ` bugzilla-daemon
2011-01-10 19:16 ` bugzilla-daemon
2011-02-05 17:39 ` bugzilla-daemon
2011-04-08 15:25 ` bugzilla-daemon
2011-04-08 16:05 ` bugzilla-daemon
2011-05-05 16:14 ` bugzilla-daemon
2011-05-09 8:58 ` bugzilla-daemon [this message]
2011-05-09 8:59 ` bugzilla-daemon
2011-05-09 9:27 ` bugzilla-daemon
2011-05-09 9:29 ` bugzilla-daemon
2011-11-02 21:27 ` bugzilla-daemon
2019-10-14 13:20 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110509085832.B700D13004F@annarchy.freedesktop.org \
--to=bugzilla-daemon@freedesktop.org \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).