From: bugzilla-daemon@bugzilla.kernel.org
To: dri-devel@lists.freedesktop.org
Subject: [Bug 42727] radeon KMS with CRT TV
Date: Thu, 1 Mar 2012 16:13:22 GMT [thread overview]
Message-ID: <201203011613.q21GDM6j010137@bugzilla.kernel.org> (raw)
In-Reply-To: <bug-42727-2300@https.bugzilla.kernel.org/>
https://bugzilla.kernel.org/show_bug.cgi?id=42727
--- Comment #27 from Egor Y. Egorov <egorov_egor@bk.ru> 2012-03-01 16:13:21 ---
No, did not help. :(
$ xrandr --verbose
Screen 0: minimum 320 x 200, current 2304 x 1024, maximum 8192 x 8192
DVI-0 connected 1280x1024+0+0 (0x54) normal (normal left inverted right x axis
y axis) 337mm x 270mm
Identifier: 0x51
Timestamp: 264987
Subpixel: horizontal rgb
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones: DVI-1
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff000469b4175b070000
2f0f010380221b962ac5c8a3574a9c23
12484cbfee0081800101010101010101
010101010101302a009851002a403070
1300510e1100001e000000fd003c4b1e
410b000a202020202020000000fc0041
53555320504d313754550a20000000ff
0035414c373030313838330a2020006f
load detection: 1 (0x00000001) range: (0,1)
underscan vborder: 0 (0x00000000) range: (0,128)
underscan hborder: 0 (0x00000000) range: (0,128)
underscan: off
supported: off on auto
coherent: 1 (0x00000001) range: (0,1)
1280x1024 (0x54) 108.0MHz +HSync +VSync *current +preferred
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1024x768 (0x55) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x56) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x57) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
832x624 (0x58) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x59) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x5a) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x5b) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x5c) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x5d) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 491 total 520 clock 72.8Hz
640x480 (0x5e) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x5f) 30.2MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz
v: height 480 start 483 end 486 total 525 clock 66.7Hz
640x480 (0x60) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0x61) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
S-video connected 1024x768+1280+0 (0x177) normal (normal left inverted right x
axis y axis) 0mm x 0mm
Identifier: 0x52
Timestamp: 264987
Subpixel: no subpixels
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 1
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
tv standard: pal
supported: ntsc pal pal-m pal-60
ntsc-j scart-pal pal-cn secam
load detection: 1 (0x00000001) range: (0,1)
1024x768 (0x177) 63.5MHz -HSync +VSync *current
h: width 1024 start 1072 end 1176 total 1328 skew 0 clock 47.8KHz
v: height 768 start 771 end 775 total 798 clock 59.9Hz
800x600 (0x178) 38.2MHz -HSync +VSync
h: width 800 start 832 end 912 total 1024 skew 0 clock 37.4KHz
v: height 600 start 603 end 607 total 624 clock 59.9Hz
848x480 (0x179) 31.5MHz -HSync +VSync
h: width 848 start 872 end 952 total 1056 skew 0 clock 29.8KHz
v: height 480 start 483 end 493 total 500 clock 59.7Hz
720x480 (0x17a) 26.8MHz -HSync +VSync
h: width 720 start 744 end 808 total 896 skew 0 clock 29.9KHz
v: height 480 start 483 end 493 total 500 clock 59.7Hz
640x480 (0x17b) 23.8MHz -HSync +VSync
h: width 640 start 664 end 720 total 800 skew 0 clock 29.7KHz
v: height 480 start 483 end 487 total 500 clock 59.4Hz
DVI-1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x53
Timestamp: 264987
Subpixel: horizontal rgb
Clones: DVI-0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
load detection: 1 (0x00000001) range: (0,1)
underscan vborder: 0 (0x00000000) range: (0,128)
underscan hborder: 0 (0x00000000) range: (0,128)
underscan: off
supported: off on auto
coherent: 1 (0x00000001) range: (0,1)
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
next prev parent reply other threads:[~2012-03-01 16:13 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-04 12:06 [Bug 42727] New: radeon KMS with CRT TV bugzilla-daemon
2012-02-04 12:25 ` [Bug 42727] " bugzilla-daemon
2012-02-04 12:37 ` bugzilla-daemon
2012-02-09 9:13 ` bugzilla-daemon
2012-02-09 17:48 ` bugzilla-daemon
2012-02-09 18:29 ` bugzilla-daemon
2012-02-21 16:37 ` bugzilla-daemon
2012-02-26 14:12 ` bugzilla-daemon
2012-02-26 17:41 ` bugzilla-daemon
2012-02-27 2:13 ` bugzilla-daemon
2012-02-27 13:54 ` bugzilla-daemon
2012-02-27 14:26 ` bugzilla-daemon
2012-02-27 14:26 ` bugzilla-daemon
2012-02-27 15:31 ` bugzilla-daemon
2012-02-28 2:10 ` bugzilla-daemon
2012-02-28 12:49 ` bugzilla-daemon
2012-02-28 12:50 ` bugzilla-daemon
2012-02-28 12:50 ` bugzilla-daemon
2012-02-28 12:50 ` bugzilla-daemon
2012-02-28 15:50 ` bugzilla-daemon
2012-02-28 16:29 ` bugzilla-daemon
2012-02-29 21:04 ` bugzilla-daemon
2012-03-01 13:39 ` bugzilla-daemon
2012-03-01 14:40 ` bugzilla-daemon
2012-03-01 14:45 ` bugzilla-daemon
2012-03-01 15:04 ` bugzilla-daemon
2012-03-01 15:53 ` bugzilla-daemon
2012-03-01 16:13 ` bugzilla-daemon [this message]
2012-03-01 16:18 ` bugzilla-daemon
2012-03-01 16:26 ` bugzilla-daemon
2012-03-02 13:34 ` bugzilla-daemon
2012-03-02 13:35 ` bugzilla-daemon
2012-03-03 10:03 ` bugzilla-daemon
2012-03-03 10:04 ` bugzilla-daemon
2012-03-03 10:04 ` bugzilla-daemon
2012-03-03 10:05 ` bugzilla-daemon
2012-03-03 10:05 ` bugzilla-daemon
2012-03-03 10:06 ` bugzilla-daemon
2012-03-03 10:07 ` bugzilla-daemon
2012-03-03 10:07 ` bugzilla-daemon
2012-03-03 10:07 ` bugzilla-daemon
2012-03-03 10:08 ` bugzilla-daemon
2012-03-03 10:08 ` bugzilla-daemon
2012-03-03 10:09 ` bugzilla-daemon
2012-03-03 10:10 ` bugzilla-daemon
2012-03-03 10:10 ` bugzilla-daemon
2012-04-01 4:52 ` bugzilla-daemon
2012-04-01 13:03 ` bugzilla-daemon
2012-04-01 15:29 ` bugzilla-daemon
2012-05-29 4:34 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201203011613.q21GDM6j010137@bugzilla.kernel.org \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox