* Regression: black screen on VGA w/ nouveau in Linux 3.3 @ 2012-03-19 14:35 Nick Bowler 2012-03-23 19:50 ` Maciej Rutecki 2012-04-04 1:27 ` Nick Bowler 0 siblings, 2 replies; 4+ messages in thread From: Nick Bowler @ 2012-03-19 14:35 UTC (permalink / raw) To: linux-kernel, dri-devel Hi folks, Just upgraded to Linux 3.3 on my desktop and noticed that the VGA output on my card w/ nouveau is totally black (both at the console and in X). Almost everything appears to work normally: DPMS works, modesetting works, DDC works... all messages indicate that things are working -- just the image is completely black. The VGA is one of two outputs in use: the other (DVI) output works normally. The card also has an unused TV-out port, FWIW. The card is an NV36 generation (Geforce FX5700 AGP). This is a regression from Linux 3.2 -- unfortunately, bisection has proved extremely difficult because the intermediate kernels git is asking me to test panic immediately on boot (and compiling Linux takes a fairly long time on this box too). The failed attempt went like this: git bisect start 'drivers/gpu' # bad: [c16fa4f2ad19908a47c63d8fa436a1178438c7e7] Linux 3.3 git bisect bad c16fa4f2ad19908a47c63d8fa436a1178438c7e7 # good: [805a6af8dba5dfdd35ec35dc52ec0122400b2610] Linux 3.2 git bisect good 805a6af8dba5dfdd35ec35dc52ec0122400b2610 # skip: [5d56fe5fd794a98c4f446f8665fd06b82e93ff64] Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-core-next git bisect skip 5d56fe5fd794a98c4f446f8665fd06b82e93ff64 # good: [dffc9ceb55695f121adc57dd1fde7304c3afe81e] gma500: kill virtual mapping support git bisect good dffc9ceb55695f121adc57dd1fde7304c3afe81e # skip: [5c2a5ce689c99037771a6c110374461781a6f042] drm: add missing exports for i810 driver. git bisect skip 5c2a5ce689c99037771a6c110374461781a6f042 # skip: [44517c44496062180a6376cc704b33129441ce60] drm/radeon/kms: Add an MSI quirk for Dell RS690 git bisect skip 44517c44496062180a6376cc704b33129441ce60 (I stopped at this point) I'm running the latest git xf86-video-nouveau, but since the issue occurs at the console it's probably not too important... Let me know if you need any more info, -- Nick Bowler, Elliptic Technologies (http://www.elliptictech.com/) ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Regression: black screen on VGA w/ nouveau in Linux 3.3 2012-03-19 14:35 Regression: black screen on VGA w/ nouveau in Linux 3.3 Nick Bowler @ 2012-03-23 19:50 ` Maciej Rutecki 2012-04-04 1:27 ` Nick Bowler 1 sibling, 0 replies; 4+ messages in thread From: Maciej Rutecki @ 2012-03-23 19:50 UTC (permalink / raw) To: Nick Bowler; +Cc: linux-kernel, dri-devel On poniedziałek, 19 marca 2012 o 15:35:48 Nick Bowler wrote: > Hi folks, > > Just upgraded to Linux 3.3 on my desktop and noticed that the VGA output > on my card w/ nouveau is totally black (both at the console and in X). > Almost everything appears to work normally: DPMS works, modesetting > works, DDC works... all messages indicate that things are working -- > just the image is completely black. > > The VGA is one of two outputs in use: the other (DVI) output works > normally. The card also has an unused TV-out port, FWIW. > > The card is an NV36 generation (Geforce FX5700 AGP). This is a > regression from Linux 3.2 -- unfortunately, bisection has proved > extremely difficult because the intermediate kernels git is asking me > to test panic immediately on boot (and compiling Linux takes a fairly > long time on this box too). The failed attempt went like this: > > git bisect start 'drivers/gpu' > # bad: [c16fa4f2ad19908a47c63d8fa436a1178438c7e7] Linux 3.3 > git bisect bad c16fa4f2ad19908a47c63d8fa436a1178438c7e7 > # good: [805a6af8dba5dfdd35ec35dc52ec0122400b2610] Linux 3.2 > git bisect good 805a6af8dba5dfdd35ec35dc52ec0122400b2610 > # skip: [5d56fe5fd794a98c4f446f8665fd06b82e93ff64] Merge branch > 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 > into drm-core-next git bisect skip > 5d56fe5fd794a98c4f446f8665fd06b82e93ff64 > # good: [dffc9ceb55695f121adc57dd1fde7304c3afe81e] gma500: kill virtual > mapping support git bisect good dffc9ceb55695f121adc57dd1fde7304c3afe81e > # skip: [5c2a5ce689c99037771a6c110374461781a6f042] drm: add missing > exports for i810 driver. git bisect skip > 5c2a5ce689c99037771a6c110374461781a6f042 > # skip: [44517c44496062180a6376cc704b33129441ce60] drm/radeon/kms: Add an > MSI quirk for Dell RS690 git bisect skip > 44517c44496062180a6376cc704b33129441ce60 > > (I stopped at this point) > > I'm running the latest git xf86-video-nouveau, but since the issue > occurs at the console it's probably not too important... > > Let me know if you need any more info, I created a Bugzilla entry at https://bugzilla.kernel.org/show_bug.cgi?id=42983 for your bug/regression report, please add your address to the CC list in there, thanks! -- Maciej Rutecki http://www.mrutecki.pl ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Regression: black screen on VGA w/ nouveau in Linux 3.3 2012-03-19 14:35 Regression: black screen on VGA w/ nouveau in Linux 3.3 Nick Bowler 2012-03-23 19:50 ` Maciej Rutecki @ 2012-04-04 1:27 ` Nick Bowler 2012-04-18 2:01 ` Nick Bowler 1 sibling, 1 reply; 4+ messages in thread From: Nick Bowler @ 2012-04-04 1:27 UTC (permalink / raw) To: linux-kernel, dri-devel; +Cc: Tom Bylander, David Airlie, Ben Skeggs [-- Attachment #1: Type: text/plain, Size: 8151 bytes --] CCing Tom Bylander as he sent me a mail off-list saying he experiences a similar issue on an FX 5200. Tom, maybe you'll have better luck bisecting this than I did? On 2012-03-19 10:35 -0400, Nick Bowler wrote: > Just upgraded to Linux 3.3 on my desktop and noticed that the VGA output > on my card w/ nouveau is totally black (both at the console and in X). > Almost everything appears to work normally: DPMS works, modesetting > works, DDC works... all messages indicate that things are working -- > just the image is completely black. OK, so this is still reproducible on Linux 3.4-rc1+ (Linus' master). I captured the dmesg output before (3.2.13, which is a working kernel), and after (3.3.1 and 3.4-rc1-00144-g01627d9 - both fail in an identical manner). All three logs are attached in full (gzipped). One thing that immediately jumps out is the WARNING in the 3.4-rc1+ log that occurs early and did not appear in either of the other logs: ------------[ cut here ]------------ WARNING: at /home/nick/misc/linux-2.6/arch/x86/pci/i386.c:60 pcibios_fwaddrmap_lookup+0x1d/0x3d() Hardware name: K8N-E-Deluxe Modules linked in: Pid: 1, comm: swapper Not tainted 3.4.0-rc1-00144-g01627d9 #47 Call Trace: [<ffffffff81026baf>] warn_slowpath_common+0x80/0x98 [<ffffffff81026bdc>] warn_slowpath_null+0x15/0x17 [<ffffffff8129f79f>] pcibios_fwaddrmap_lookup+0x1d/0x3d [<ffffffff81687306>] pcibios_allocate_resources+0xd4/0x217 [<ffffffff81688447>] ? pci_legacy_init+0x3e/0x3e [<ffffffff81687460>] pcibios_resource_survey+0x17/0x2d [<ffffffff81688dfd>] pcibios_init+0x28/0x3a [<ffffffff8168848e>] pci_subsys_init+0x47/0x4d [<ffffffff810002e2>] do_one_initcall+0x78/0x126 [<ffffffff81662bab>] kernel_init+0xe9/0x17a [<ffffffff8166248a>] ? rdinit_setup+0x28/0x28 [<ffffffff8131ac44>] kernel_thread_helper+0x4/0x10 [<ffffffff81662ac2>] ? start_kernel+0x321/0x321 [<ffffffff8131ac40>] ? gs_change+0xb/0xb ---[ end trace 4eaa2a86a8e2da22 ]--- Other than that, I diffed the 3.2.13 log and 3.4-rc1+ log and grepped for nouveau-related differences. I see no obvious errors, but I admit that I don't really know what to look for. % diff -u nouveau-3.2.13.log nouveau-3.4-rc1+.log | grep -C3 '\[drm\]' @@ -418,19 +429,21 @@ Real Time Clock Driver v1.12b Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 +VGA switcheroo: detected Optimus DSM method \ handle ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 19 -nouveau 0000:01:00.0: PCI INT A -> Link[LNKE] -> GSI 19 (level, low) -> IRQ 19 [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x436200a1) -[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN +[drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS [drm] nouveau 0000:01:00.0: ... appears to be valid +[drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN [drm] nouveau 0000:01:00.0: BMP BIOS found [drm] nouveau 0000:01:00.0: BMP version 5.40 [drm] nouveau 0000:01:00.0: Bios version 04.36.20.21 -[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 -[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00009c40 -[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 00009c40 -[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04000302 00000000 -[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000303 +[drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do +[drm] nouveau 0000:01:00.0: DCB version 2.2 +[drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 00009c40 +[drm] nouveau 0000:01:00.0: DCB outp 01: 02010310 00009c40 +[drm] nouveau 0000:01:00.0: DCB outp 02: 04000302 00000000 +[drm] nouveau 0000:01:00.0: DCB outp 03: 02020321 00000303 [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF01D [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF4E1 @@ -439,11 +452,10 @@ [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF8B3 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF8D0 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF959 -[drm] nouveau 0000:01:00.0: 0 available performance level(s) -[drm] nouveau 0000:01:00.0: c: core 425MHz memory 501MHz voltage 1350mV -[TTM] Zone kernel: Available graphics memory: 512160 kiB. -[TTM] Initializing pool allocator. -[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM +[TTM] Zone kernel: Available graphics memory: 512142 kiB +[TTM] Initializing pool allocator +[TTM] Initializing DMA pool allocator +[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM (DDR1) agpgart-amd64 0000:00:00.0: AGP 3.0 bridge agpgart: swapper tried to set rate=x12. Setting to AGP3 x8 mode. agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode @@ -452,11 +464,14 @@ [drm] nouveau 0000:01:00.0: Saving VGA fonts [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. +[drm] nouveau 0000:01:00.0: 0 available performance level(s) +[drm] nouveau 0000:01:00.0: c: core 425MHz memory 501MHz voltage 1350mV +[drm] nouveau 0000:01:00.0: 0xE51A: Parsing digital output script table [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) -[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88003da11400 +[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88003e314c00 fbcon: nouveaufb (fb0) is primary device [drm] nouveau 0000:01:00.0: 0xE51A: Parsing digital output script table [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) @@ -466,12 +481,11 @@ Console: switching to colour frame buffer device 160x64 fb0: nouveaufb frame buffer device drm: registered panic notifier -[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 +[drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0 brd: module loaded sata_nv 0000:00:0a.0: version 3.5 ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 22 -- +NFS: Registering the id_resolver key type it87: Found IT8712F chip at 0xd00, revision 7 it87: VID is disabled (pins used for GPIO) [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) > The VGA is one of two outputs in use: the other (DVI) output works > normally. The card also has an unused TV-out port, FWIW. > > The card is an NV36 generation (Geforce FX5700 AGP). This is a > regression from Linux 3.2 -- unfortunately, bisection has proved > extremely difficult because the intermediate kernels git is asking me > to test panic immediately on boot (and compiling Linux takes a fairly > long time on this box too). The failed attempt went like this: > > git bisect start 'drivers/gpu' > # bad: [c16fa4f2ad19908a47c63d8fa436a1178438c7e7] Linux 3.3 > git bisect bad c16fa4f2ad19908a47c63d8fa436a1178438c7e7 > # good: [805a6af8dba5dfdd35ec35dc52ec0122400b2610] Linux 3.2 > git bisect good 805a6af8dba5dfdd35ec35dc52ec0122400b2610 > # skip: [5d56fe5fd794a98c4f446f8665fd06b82e93ff64] Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-core-next > git bisect skip 5d56fe5fd794a98c4f446f8665fd06b82e93ff64 > # good: [dffc9ceb55695f121adc57dd1fde7304c3afe81e] gma500: kill virtual mapping support > git bisect good dffc9ceb55695f121adc57dd1fde7304c3afe81e > # skip: [5c2a5ce689c99037771a6c110374461781a6f042] drm: add missing exports for i810 driver. > git bisect skip 5c2a5ce689c99037771a6c110374461781a6f042 > # skip: [44517c44496062180a6376cc704b33129441ce60] drm/radeon/kms: Add an MSI quirk for Dell RS690 > git bisect skip 44517c44496062180a6376cc704b33129441ce60 > > (I stopped at this point) > > I'm running the latest git xf86-video-nouveau, but since the issue > occurs at the console it's probably not too important... Please let me know if you need any more info, -- Nick Bowler, Elliptic Technologies (http://www.elliptictech.com/) [-- Attachment #2: nouveau-3.2.13.log.gz --] [-- Type: application/octet-stream, Size: 10448 bytes --] [-- Attachment #3: nouveau-3.3.1.log.gz --] [-- Type: application/octet-stream, Size: 10298 bytes --] [-- Attachment #4: nouveau-3.4-rc1+.log.gz --] [-- Type: application/octet-stream, Size: 10747 bytes --] ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Regression: black screen on VGA w/ nouveau in Linux 3.3 2012-04-04 1:27 ` Nick Bowler @ 2012-04-18 2:01 ` Nick Bowler 0 siblings, 0 replies; 4+ messages in thread From: Nick Bowler @ 2012-04-18 2:01 UTC (permalink / raw) To: linux-kernel, dri-devel; +Cc: Tom Bylander, David Airlie, Ben Skeggs On 2012-04-03 21:27 -0400, Nick Bowler wrote: > CCing Tom Bylander as he sent me a mail off-list saying he experiences > a similar issue on an FX 5200. > > Tom, maybe you'll have better luck bisecting this than I did? > > On 2012-03-19 10:35 -0400, Nick Bowler wrote: > > Just upgraded to Linux 3.3 on my desktop and noticed that the VGA output > > on my card w/ nouveau is totally black (both at the console and in X). > > Almost everything appears to work normally: DPMS works, modesetting > > works, DDC works... all messages indicate that things are working -- > > just the image is completely black. > > OK, so this is still reproducible on Linux 3.4-rc1+ (Linus' master). I > captured the dmesg output before (3.2.13, which is a working kernel), > and after (3.3.1 and 3.4-rc1-00144-g01627d9 - both fail in an identical > manner). All three logs are attached in full (gzipped). Ping? I'm still seeing this on 3.4-rc3+. Is there any other info that I need to provide? > One thing that immediately jumps out is the WARNING in the 3.4-rc1+ log > that occurs early and did not appear in either of the other logs: > > ------------[ cut here ]------------ > WARNING: at /home/nick/misc/linux-2.6/arch/x86/pci/i386.c:60 > pcibios_fwaddrmap_lookup+0x1d/0x3d() > Hardware name: K8N-E-Deluxe > Modules linked in: > Pid: 1, comm: swapper Not tainted 3.4.0-rc1-00144-g01627d9 #47 > Call Trace: > [<ffffffff81026baf>] warn_slowpath_common+0x80/0x98 > [<ffffffff81026bdc>] warn_slowpath_null+0x15/0x17 > [<ffffffff8129f79f>] pcibios_fwaddrmap_lookup+0x1d/0x3d > [<ffffffff81687306>] pcibios_allocate_resources+0xd4/0x217 > [<ffffffff81688447>] ? pci_legacy_init+0x3e/0x3e > [<ffffffff81687460>] pcibios_resource_survey+0x17/0x2d > [<ffffffff81688dfd>] pcibios_init+0x28/0x3a > [<ffffffff8168848e>] pci_subsys_init+0x47/0x4d > [<ffffffff810002e2>] do_one_initcall+0x78/0x126 > [<ffffffff81662bab>] kernel_init+0xe9/0x17a > [<ffffffff8166248a>] ? rdinit_setup+0x28/0x28 > [<ffffffff8131ac44>] kernel_thread_helper+0x4/0x10 > [<ffffffff81662ac2>] ? start_kernel+0x321/0x321 > [<ffffffff8131ac40>] ? gs_change+0xb/0xb > ---[ end trace 4eaa2a86a8e2da22 ]--- > > Other than that, I diffed the 3.2.13 log and 3.4-rc1+ log and grepped > for nouveau-related differences. I see no obvious errors, but I admit > that I don't really know what to look for. > > % diff -u nouveau-3.2.13.log nouveau-3.4-rc1+.log | grep -C3 '\[drm\]' > > @@ -418,19 +429,21 @@ > Real Time Clock Driver v1.12b > Linux agpgart interface v0.103 > [drm] Initialized drm 1.1.0 20060810 > +VGA switcheroo: detected Optimus DSM method \ handle > ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 19 > -nouveau 0000:01:00.0: PCI INT A -> Link[LNKE] -> GSI 19 (level, low) -> IRQ 19 > [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x436200a1) > -[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN > +[drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS > [drm] nouveau 0000:01:00.0: ... appears to be valid > +[drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN > [drm] nouveau 0000:01:00.0: BMP BIOS found > [drm] nouveau 0000:01:00.0: BMP version 5.40 > [drm] nouveau 0000:01:00.0: Bios version 04.36.20.21 > -[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 > -[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00009c40 > -[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010310 00009c40 > -[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04000302 00000000 > -[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02020321 00000303 > +[drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do > +[drm] nouveau 0000:01:00.0: DCB version 2.2 > +[drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 00009c40 > +[drm] nouveau 0000:01:00.0: DCB outp 01: 02010310 00009c40 > +[drm] nouveau 0000:01:00.0: DCB outp 02: 04000302 00000000 > +[drm] nouveau 0000:01:00.0: DCB outp 03: 02020321 00000303 > [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode > [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xF01D > [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF4E1 > @@ -439,11 +452,10 @@ > [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF8B3 > [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF8D0 > [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF959 > -[drm] nouveau 0000:01:00.0: 0 available performance level(s) > -[drm] nouveau 0000:01:00.0: c: core 425MHz memory 501MHz voltage 1350mV > -[TTM] Zone kernel: Available graphics memory: 512160 kiB. > -[TTM] Initializing pool allocator. > -[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM > +[TTM] Zone kernel: Available graphics memory: 512142 kiB > +[TTM] Initializing pool allocator > +[TTM] Initializing DMA pool allocator > +[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM (DDR1) > agpgart-amd64 0000:00:00.0: AGP 3.0 bridge > agpgart: swapper tried to set rate=x12. Setting to AGP3 x8 mode. > agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode > @@ -452,11 +464,14 @@ > [drm] nouveau 0000:01:00.0: Saving VGA fonts > [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > [drm] No driver support for vblank timestamp query. > +[drm] nouveau 0000:01:00.0: 0 available performance level(s) > +[drm] nouveau 0000:01:00.0: c: core 425MHz memory 501MHz voltage 1350mV > +[drm] nouveau 0000:01:00.0: 0xE51A: Parsing digital output script table > [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) > [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) > [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) > [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) > -[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88003da11400 > +[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88003e314c00 > fbcon: nouveaufb (fb0) is primary device > [drm] nouveau 0000:01:00.0: 0xE51A: Parsing digital output script table > [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) > @@ -466,12 +481,11 @@ > Console: switching to colour frame buffer device 160x64 > fb0: nouveaufb frame buffer device > drm: registered panic notifier > -[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 > +[drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0 > brd: module loaded > sata_nv 0000:00:0a.0: version 3.5 > ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 22 > -- > +NFS: Registering the id_resolver key type > it87: Found IT8712F chip at 0xd00, revision 7 > it87: VID is disabled (pins used for GPIO) > [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) > > > The VGA is one of two outputs in use: the other (DVI) output works > > normally. The card also has an unused TV-out port, FWIW. > > > > The card is an NV36 generation (Geforce FX5700 AGP). This is a > > regression from Linux 3.2 -- unfortunately, bisection has proved > > extremely difficult because the intermediate kernels git is asking me > > to test panic immediately on boot (and compiling Linux takes a fairly > > long time on this box too). The failed attempt went like this: > > > > git bisect start 'drivers/gpu' > > # bad: [c16fa4f2ad19908a47c63d8fa436a1178438c7e7] Linux 3.3 > > git bisect bad c16fa4f2ad19908a47c63d8fa436a1178438c7e7 > > # good: [805a6af8dba5dfdd35ec35dc52ec0122400b2610] Linux 3.2 > > git bisect good 805a6af8dba5dfdd35ec35dc52ec0122400b2610 > > # skip: [5d56fe5fd794a98c4f446f8665fd06b82e93ff64] Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-core-next > > git bisect skip 5d56fe5fd794a98c4f446f8665fd06b82e93ff64 > > # good: [dffc9ceb55695f121adc57dd1fde7304c3afe81e] gma500: kill virtual mapping support > > git bisect good dffc9ceb55695f121adc57dd1fde7304c3afe81e > > # skip: [5c2a5ce689c99037771a6c110374461781a6f042] drm: add missing exports for i810 driver. > > git bisect skip 5c2a5ce689c99037771a6c110374461781a6f042 > > # skip: [44517c44496062180a6376cc704b33129441ce60] drm/radeon/kms: Add an MSI quirk for Dell RS690 > > git bisect skip 44517c44496062180a6376cc704b33129441ce60 > > > > (I stopped at this point) > > > > I'm running the latest git xf86-video-nouveau, but since the issue > > occurs at the console it's probably not too important... Thanks, -- Nick Bowler, Elliptic Technologies (http://www.elliptictech.com/) ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-04-18 2:01 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-03-19 14:35 Regression: black screen on VGA w/ nouveau in Linux 3.3 Nick Bowler 2012-03-23 19:50 ` Maciej Rutecki 2012-04-04 1:27 ` Nick Bowler 2012-04-18 2:01 ` Nick Bowler
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).