From: Dave Jones <davej@codemonkey.org.uk>
To: dri-devel@lists.freedesktop.org
Cc: "Alex Deucher" <alexander.deucher@amd.com>,
"Christian König" <christian.koenig@amd.com>
Subject: Radeon Verde displayport failure.
Date: Thu, 7 May 2015 19:47:43 -0400 [thread overview]
Message-ID: <20150507234743.GA1467@codemonkey.org.uk> (raw)
I just bought a new radeon (1002:682c), to pair with my shiny new displayport monitor.
It shows a display during through the BIOS POST, and grub, but when the kernel
starts up, it's a coin toss whether or not I get anything.
Sometimes it just goes straight into power saving.
When I do get something on the console, it continues to boot and then X starts up and
puts it into power saving too. Trying to flip back to tty1 doesn't light up the display again.
I'm running On debian stable, with copied-by-hand verde_* firmware files from the linux-firmware git tree.
Here's a log from the 4.0-rc2 kernel.
Any other info I can provide ?
Dave
[drm] register mmio base: 0xFBE00000
[drm] register mmio size: 262144
radeon 0000:01:00.0: Invalid ROM contents
ATOM BIOS: C755
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 16400232 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading verde Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:2f08 = 77a3103/e
input: HDA ATI HDMI HDMI as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input4
input: HDA ATI HDMI HDMI as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input5
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] probing gen 2 caps for device 8086:2f08 = 77a3103/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000277000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880807d0ac00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880807d0ac04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880807d0ac08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880807d0ac0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880807d0ac10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001035a18
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 9 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD4
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD5
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] DP-3
[drm] HPD1
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DP-4
[drm] HPD2
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm:si_dpm_set_power_state [radeon]] *ERROR* si_enable_smc_cac failed
[drm] fb mappable at 0xD047A000
[drm] vram apper at 0xD0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
fbcon: radeondrmfb (fb0) is primary device
[drm:si_dpm_set_power_state [radeon]] *ERROR* si_enable_smc_cac failed
[drm:radeon_dp_link_train [radeon]] *ERROR* displayport link status failed
[drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery failed
Console: switching to colour frame buffer device 128x48
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.42.0 20080528 for 0000:01:00.0 on minor 0
[drm:radeon_dp_link_train [radeon]] *ERROR* displayport link status failed
[drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery failed
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2015-05-08 0:41 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-07 23:47 Dave Jones [this message]
2015-05-08 13:23 ` Radeon Verde displayport failure Deucher, Alexander
2015-05-08 15:40 ` Dave Jones
2015-05-11 18:40 ` Dave Jones
2015-05-11 19:59 ` Alex Deucher
2015-05-11 23:33 ` Dave Jones
2015-05-12 22:38 ` Dave Jones
2015-05-13 0:04 ` Dave Jones
2015-05-14 13:49 ` Alex Deucher
2015-05-14 15:09 ` Dave Jones
2015-05-15 3:52 ` Dave Jones
2015-05-15 9:16 ` Michel Dänzer
2015-05-15 12:44 ` Dave Jones
2015-05-20 22:03 ` Alex Deucher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150507234743.GA1467@codemonkey.org.uk \
--to=davej@codemonkey.org.uk \
--cc=alexander.deucher@amd.com \
--cc=christian.koenig@amd.com \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox