From: Peter Wu <peter-VTkQYDcBqhK7DlmcbJSQ7g@public.gmane.org>
To: Lukas Wunner <lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
Cc: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
Dave Airlie <airlied-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: Re: [PATCH 1/9] drm/nouveau: Don't leak runtime pm ref on driver unload
Date: Fri, 27 May 2016 03:07:33 +0200 [thread overview]
Message-ID: <20160527010733.GA1029@al> (raw)
In-Reply-To: <dd120a30cb769c93af8973cae41f61831d17e04b.1464103767.git.lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
On Tue, May 24, 2016 at 06:03:27PM +0200, Lukas Wunner wrote:
> nouveau_drm_load() calls pm_runtime_put() if nouveau_runtime_pm != 0,
> but nouveau_drm_unload() calls pm_runtime_get_sync() unconditionally.
> We therefore leak a runtime pm ref whenever nouveau is loaded with
> runpm=0 and then unloaded. The GPU will subsequently never runtime
> suspend even if nouveau is loaded again with runpm=1.
>
> Fix by taking the runtime pm ref under the same condition that it was
> released on driver load.
>
> Fixes: 5addcf0a5f0f ("nouveau: add runtime PM support (v0.9)")
> Cc: Dave Airlie <airlied@redhat.com>
> Reported-by: Karol Herbst <nouveau@karolherbst.de>
> Tested-by: Karol Herbst <nouveau@karolherbst.de>
> Signed-off-by: Lukas Wunner <lukas@wunner.de>
Looks good, I tested this scenario:
ru(){ cat /sys/bus/pci/devices/0000\:01:00.0/power/runtime_usage;}
ru # reports 1
modprobe nouveau runpm=0
ru # reports 2
rmmod nouveau
ru # reports 1
Without runpm=0 the count drops to 0 in the second step and stays 0 in
the third step. After applying patch 2/9, this correctly reports 1 as
expected (this is the same as manually setting power/control to on).
Peter
> ---
> drivers/gpu/drm/nouveau/nouveau_drm.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
> index 11f8dd9..faf7438 100644
> --- a/drivers/gpu/drm/nouveau/nouveau_drm.c
> +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
> @@ -498,7 +498,10 @@ nouveau_drm_unload(struct drm_device *dev)
> {
> struct nouveau_drm *drm = nouveau_drm(dev);
>
> - pm_runtime_get_sync(dev->dev);
> + if (nouveau_runtime_pm != 0) {
> + pm_runtime_get_sync(dev->dev);
> + }
> +
> nouveau_fbcon_fini(dev);
> nouveau_accel_fini(drm);
> nouveau_hwmon_fini(dev);
> --
> 2.8.1
>
> _______________________________________________
> Nouveau mailing list
> Nouveau@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/nouveau
--
Kind regards,
Peter Wu
https://lekensteyn.nl
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
next prev parent reply other threads:[~2016-05-27 1:07 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-24 16:03 [PATCH 0/9] Fix runtime pm ref leaks Lukas Wunner
[not found] ` <cover.1464103767.git.lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
2016-05-24 16:03 ` [PATCH 9/9] drm: Turn off crtc before tearing down its data structure Lukas Wunner
2016-05-24 21:30 ` [Nouveau] " Daniel Vetter
2016-05-24 22:07 ` Lukas Wunner
[not found] ` <20160524220753.GA5941-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
2016-05-24 22:30 ` Daniel Vetter
[not found] ` <20160524213042.GC27098-dv86pmgwkMBes7Z6vYuT8azUEOm+Xw19@public.gmane.org>
2016-05-25 10:51 ` Lukas Wunner
2016-05-25 13:43 ` [Nouveau] " Daniel Vetter
[not found] ` <CAKMK7uGFb9ihRtjeK7s0ezPPv-C6S9GKbE4h9MLoPyHyN=9W5Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-06-01 12:36 ` Lukas Wunner
[not found] ` <20160601123641.GA15243-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
2016-06-01 14:40 ` Daniel Vetter
2016-06-03 7:30 ` [Nouveau] " Lukas Wunner
2016-06-03 18:21 ` Daniel Vetter
2016-06-08 16:55 ` Lukas Wunner
2016-05-24 16:03 ` [PATCH 1/9] drm/nouveau: Don't leak runtime pm ref on driver unload Lukas Wunner
[not found] ` <dd120a30cb769c93af8973cae41f61831d17e04b.1464103767.git.lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
2016-05-27 1:07 ` Peter Wu [this message]
2016-05-29 15:50 ` Lukas Wunner
[not found] ` <20160529155006.GA12909-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
2016-05-30 17:03 ` Peter Wu
2016-05-31 11:34 ` Lukas Wunner
[not found] ` <20160531113443.GA14098-JFq808J9C/izQB+pC5nmwQ@public.gmane.org>
2016-05-31 11:41 ` Peter Wu
2016-05-24 16:03 ` [PATCH 2/9] drm/nouveau: Forbid runtime pm " Lukas Wunner
2016-05-24 16:03 ` [PATCH 6/9] drm/amdgpu: Don't leak runtime pm ref " Lukas Wunner
2016-05-24 16:03 ` [PATCH 8/9] drm/amdgpu: Forbid runtime pm " Lukas Wunner
2016-05-24 16:03 ` [PATCH 5/9] drm/radeon: " Lukas Wunner
2016-05-24 16:03 ` [PATCH 7/9] drm/amdgpu: Don't leak runtime pm ref on driver load Lukas Wunner
2016-05-24 16:03 ` [PATCH 3/9] drm/radeon: Don't leak runtime pm ref on driver unload Lukas Wunner
2016-05-24 16:03 ` [PATCH 4/9] drm/radeon: Don't leak runtime pm ref on driver load Lukas Wunner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160527010733.GA1029@al \
--to=peter-vtkqydcbqhk7dlmcbjsq7g@public.gmane.org \
--cc=airlied-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=lukas-JFq808J9C/izQB+pC5nmwQ@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox