[PATCH 1/2] drm/etnaviv: ensure write caches are flushed at end of user cmdstream

[Lucas Stach <l.stach@pengutronix.de>]

If the GPU is done with one user command stream the buffers referenced
by this command stream may go away and get unmapped from the MMU. If
the write caches are still dirty at this point later evictions will run
into MMU faults, killing the GPU.

Make sure the write caches are flushed before signaling completion
of the user command stream.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/gpu/drm/etnaviv/etnaviv_buffer.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_buffer.c b/drivers/gpu/drm/etnaviv/etnaviv_buffer.c
index cb86c7e5495c..d9230132dfbc 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_buffer.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_buffer.c
@@ -329,20 +329,34 @@ void etnaviv_buffer_queue(struct etnaviv_gpu *gpu, unsigned int event,
 	/*
 	 * Append a LINK to the submitted command buffer to return to
 	 * the ring buffer.  return_target is the ring target address.
-	 * We need three dwords: event, wait, link.
+	 * We need at most 7 dwords in the return target: 2 cache flush +
+	 * 2 semaphore stall + 1 event + 1 wait + 1 link.
 	 */
-	return_dwords = 3;
+	return_dwords = 7;
 	return_target = etnaviv_buffer_reserve(gpu, buffer, return_dwords);
 	CMD_LINK(cmdbuf, return_dwords, return_target);
 
 	/*
-	 * Append event, wait and link pointing back to the wait
-	 * command to the ring buffer.
+	 * Append a cache flush, stall, event, wait and link pointing back to
+	 * the wait command to the ring buffer.
 	 */
+	if (gpu->exec_state == ETNA_PIPE_2D) {
+		CMD_LOAD_STATE(buffer, VIVS_GL_FLUSH_CACHE,
+				       VIVS_GL_FLUSH_CACHE_PE2D);
+	} else {
+		CMD_LOAD_STATE(buffer, VIVS_GL_FLUSH_CACHE,
+				       VIVS_GL_FLUSH_CACHE_DEPTH |
+				       VIVS_GL_FLUSH_CACHE_COLOR);
+		CMD_LOAD_STATE(buffer, VIVS_TS_FLUSH_CACHE,
+				       VIVS_TS_FLUSH_CACHE_FLUSH);
+	}
+	CMD_SEM(buffer, SYNC_RECIPIENT_FE, SYNC_RECIPIENT_PE);
+	CMD_STALL(buffer, SYNC_RECIPIENT_FE, SYNC_RECIPIENT_PE);
 	CMD_LOAD_STATE(buffer, VIVS_GL_EVENT, VIVS_GL_EVENT_EVENT_ID(event) |
 		       VIVS_GL_EVENT_FROM_PE);
 	CMD_WAIT(buffer);
-	CMD_LINK(buffer, 2, return_target + 8);
+	CMD_LINK(buffer, 2, etnaviv_iommu_get_cmdbuf_va(gpu, buffer) +
+			    buffer->user_size - 4);
 
 	if (drm_debug & DRM_UT_DRIVER)
 		pr_info("stream link to 0x%08x @ 0x%08x %p\n",
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel