From: Russell King <rmk@armlinux.org.uk>
To: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Subject: [GIT PULL] TDA998x I2C driver development updates
Date: Tue, 22 Nov 2016 10:48:37 +0000 [thread overview]
Message-ID: <20161122104837.GA25807@rmk-PC.arm.linux.org.uk> (raw)
David,
Please incorporate the latest TDA998x I2C driver development updates,
which can be found at:
git://git.armlinux.org.uk/~rmk/linux-arm.git drm-tda998x-devel
with SHA1 9b2502b6ebc632ff49743b3639ea12d4f08808a5.
These updates:
* improve the robustness of the driver wrt races
* improve the compliance for sending infoframes and audio
* re-organise the function order in the driver to group like functions
together. (This unfortunately causes a conflict with the change in
drm-misc, but it should be trivial to solve, although it looks more
scarey than it really is - sfr has already sent two reports about
this, one earlier today.)
* simplify tda998x_audio_get_eld and DPMS handling
* power down sections of the chip that we never use
* add some initial preparation for supporting the CEC driver
This will update the following files:
drivers/gpu/drm/i2c/tda998x_drv.c | 953 ++++++++++++++++++++------------------
1 file changed, 503 insertions(+), 450 deletions(-)
through these changes:
Colin Ian King (1):
drm/i2c: tda998x: fix spelling mistake
Russell King (16):
drm/i2c: tda998x: move audio mutex initialisation
drm/i2c: tda998x: avoid race in tda998x_encoder_mode_set()
drm/i2c: tda998x: avoid racy access to mode clock
drm/i2c: tda998x: avoid race when programming audio
drm/i2c: tda998x: only configure infoframes and audio if supported
drm/i2c: tda998x: only enable audio if supported by sink
drm/i2c: tda998x: correct function name in comments
drm/i2c: tda998x: move and rename tda998x_encoder_set_config()
drm/i2c: tda998x: group connector functions and funcs together
drm/i2c: tda998x: separate connector initialisation
drm/i2c: tda998x: group audio functions together
drm/i2c: tda998x: remove complexity from tda998x_audio_get_eld()
drm/i2c: tda998x: switch to boolean is_on
drm/i2c: tda998x: power down pre-filter and color conversion
drm/i2c: tda998x: allow interrupt to be shared
drm/i2c: tda998x: allow sharing of the CEC device accesses
Many thanks.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2016-11-22 10:48 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-22 10:48 Russell King [this message]
-- strict thread matches above, loose matches on Subject: below --
2018-08-02 9:34 [GIT PULL] TDA998x I2C driver development updates Russell King
2018-08-07 9:35 ` Russell King - ARM Linux
2016-09-09 16:16 Russell King
2015-12-22 16:38 Russell King
2015-10-14 16:41 Russell King
2015-05-28 9:33 Russell King
2015-05-09 13:32 Russell King
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161122104837.GA25807@rmk-PC.arm.linux.org.uk \
--to=rmk@armlinux.org.uk \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox