From: Hans de Goede <hdegoede@redhat.com>
To: "Thierry Reding" <thierry.reding@gmail.com>,
"Daniel Vetter" <daniel.vetter@intel.com>,
"Jani Nikula" <jani.nikula@linux.intel.com>,
"Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: linux-pwm@vger.kernel.org,
intel-gfx <intel-gfx@lists.freedesktop.org>,
dri-devel@lists.freedesktop.org,
Hans de Goede <hdegoede@redhat.com>
Subject: [PATCH 1/2] pwm: lpss: Make builtin and add lookup-table so that i915 can find the pwm_backlight
Date: Fri, 2 Dec 2016 11:17:35 +0100 [thread overview]
Message-ID: <20161202101736.12236-1-hdegoede@redhat.com> (raw)
The primary consumer of the lpss pwm is the i915 kms driver, but
currently that driver cannot get the pwm because i915 platforms are
not using devicetree and pwm-lpss does not call pwm_add_table.
Another problem is that i915 does not support get_pwm returning
-EPROBE_DEFER and i915's init is very complex and this is almost
impossible to fix.
This commit changes the PWM_LPSS Kconfig from a tristate to a bool, so
that when the i915 driver loads the lpss pwm will be available avoiding
the -EPROBE_DEFER issue. Note that this is identical to how the same
problem was solved for the pwm-crc driver.
Being builtin also allows calling pwm_add_table directly from the
pwm-lpss code, otherwise the pwm_add_table call would need to be put
somewhere else to ensure it happens before i915 calls pwm_get,
even if i915 would support -EPROBE_DEFER.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/pwm/Kconfig | 12 +++---------
drivers/pwm/pwm-lpss.c | 11 +++++++++++
2 files changed, 14 insertions(+), 9 deletions(-)
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index bf01288..cda31ea 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -240,28 +240,22 @@ config PWM_LPC32XX
will be called pwm-lpc32xx.
config PWM_LPSS
- tristate
+ bool
config PWM_LPSS_PCI
- tristate "Intel LPSS PWM PCI driver"
+ bool "Intel LPSS PWM PCI driver"
depends on X86 && PCI
select PWM_LPSS
help
The PCI driver for Intel Low Power Subsystem PWM controller.
- To compile this driver as a module, choose M here: the module
- will be called pwm-lpss-pci.
-
config PWM_LPSS_PLATFORM
- tristate "Intel LPSS PWM platform driver"
+ bool "Intel LPSS PWM platform driver"
depends on X86 && ACPI
select PWM_LPSS
help
The platform driver for Intel Low Power Subsystem PWM controller.
- To compile this driver as a module, choose M here: the module
- will be called pwm-lpss-platform.
-
config PWM_MESON
tristate "Amlogic Meson PWM driver"
depends on ARCH_MESON
diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c
index 72c0bce..b4d8835 100644
--- a/drivers/pwm/pwm-lpss.c
+++ b/drivers/pwm/pwm-lpss.c
@@ -161,6 +161,12 @@ static const struct pwm_ops pwm_lpss_ops = {
.owner = THIS_MODULE,
};
+/* PWM consumed by the Intel GFX */
+static struct pwm_lookup pwm_lpss_lookup[] = {
+ PWM_LOOKUP("pwm-lpss", 0, "0000:00:02.0", "pwm_backlight", 0,
+ PWM_POLARITY_NORMAL),
+};
+
struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r,
const struct pwm_lpss_boardinfo *info)
{
@@ -193,12 +199,17 @@ struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r,
return ERR_PTR(ret);
}
+ /* Add lookup table for pwm_backlight */
+ pwm_lpss_lookup[0].provider = dev_name(dev);
+ pwm_add_table(pwm_lpss_lookup, ARRAY_SIZE(pwm_lpss_lookup));
+
return lpwm;
}
EXPORT_SYMBOL_GPL(pwm_lpss_probe);
int pwm_lpss_remove(struct pwm_lpss_chip *lpwm)
{
+ pwm_remove_table(pwm_lpss_lookup, ARRAY_SIZE(pwm_lpss_lookup));
return pwmchip_remove(&lpwm->chip);
}
EXPORT_SYMBOL_GPL(pwm_lpss_remove);
--
2.9.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2016-12-02 10:17 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-02 10:17 Hans de Goede [this message]
2016-12-02 10:17 ` [PATCH 2/2] pwm: lpss: Add get_state callback Hans de Goede
2016-12-05 7:36 ` Thierry Reding
2016-12-02 10:55 ` [PATCH 1/2] pwm: lpss: Make builtin and add lookup-table so that i915 can find the pwm_backlight Jani Nikula
2016-12-05 7:46 ` Thierry Reding
2016-12-05 8:18 ` Hans de Goede
2016-12-05 10:59 ` Thierry Reding
2016-12-05 13:23 ` Hans de Goede
2016-12-12 11:54 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161202101736.12236-1-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=daniel.vetter@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=linux-pwm@vger.kernel.org \
--cc=thierry.reding@gmail.com \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).