From: Daniel Vetter <daniel@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v2 3/4] drm/atomic: Add macros to access existing old/new state
Date: Wed, 28 Dec 2016 15:25:10 +0100 [thread overview]
Message-ID: <20161228142510.GP347@dvetter-linux.ger.corp.intel.com> (raw)
In-Reply-To: <1479304688-24010-4-git-send-email-maarten.lankhorst@linux.intel.com>
On Wed, Nov 16, 2016 at 02:58:07PM +0100, Maarten Lankhorst wrote:
> During atomic check/commit, these macros should be used in place of
> get_existing_state.
>
> We also ban the use of get_xx_state after atomic check, because at that
> point no new locks should be taken and get_new/old_state should be used
> instead.
>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
So one slightly annoying thing with the new/old split is that const-ness
of these changes. In atomic_check the old state should be const, in
atomic_commit the new state. By going to the new/old split we're losing
that safeguard. Otoh we have lots and lots of exceptions to that rule ...
not sure how much aiming for const correctness is worth it.
-Daniel
> ---
> include/drm/drm_atomic.h | 100 +++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 100 insertions(+)
>
> diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
> index 462408a2d1b8..7be178264732 100644
> --- a/include/drm/drm_atomic.h
> +++ b/include/drm/drm_atomic.h
> @@ -264,6 +264,36 @@ drm_atomic_get_existing_crtc_state(struct drm_atomic_state *state,
> }
>
> /**
> + * drm_atomic_get_old_crtc_state - get old crtc state, if it exists
> + * @state: global atomic state object
> + * @crtc: crtc to grab
> + *
> + * This function returns the old crtc state for the given crtc, or
> + * NULL if the crtc is not part of the global atomic state.
> + */
> +static inline struct drm_crtc_state *
> +drm_atomic_get_old_crtc_state(struct drm_atomic_state *state,
> + struct drm_crtc *crtc)
> +{
> + return state->crtcs[drm_crtc_index(crtc)].old_state;
> +}
> +
> +/**
> + * drm_atomic_get_new_crtc_state - get new crtc state, if it exists
> + * @state: global atomic state object
> + * @crtc: crtc to grab
> + *
> + * This function returns the new crtc state for the given crtc, or
> + * NULL if the crtc is not part of the global atomic state.
> + */
> +static inline struct drm_crtc_state *
> +drm_atomic_get_new_crtc_state(struct drm_atomic_state *state,
> + struct drm_crtc *crtc)
> +{
> + return state->crtcs[drm_crtc_index(crtc)].new_state;
> +}
> +
> +/**
> * drm_atomic_get_existing_plane_state - get plane state, if it exists
> * @state: global atomic state object
> * @plane: plane to grab
> @@ -279,6 +309,36 @@ drm_atomic_get_existing_plane_state(struct drm_atomic_state *state,
> }
>
> /**
> + * drm_atomic_get_old_plane_state - get plane state, if it exists
> + * @state: global atomic state object
> + * @plane: plane to grab
> + *
> + * This function returns the old plane state for the given plane, or
> + * NULL if the plane is not part of the global atomic state.
> + */
> +static inline struct drm_plane_state *
> +drm_atomic_get_old_plane_state(struct drm_atomic_state *state,
> + struct drm_plane *plane)
> +{
> + return state->planes[drm_plane_index(plane)].old_state;
> +}
> +
> +/**
> + * drm_atomic_get_new_plane_state - get plane state, if it exists
> + * @state: global atomic state object
> + * @plane: plane to grab
> + *
> + * This function returns the new plane state for the given plane, or
> + * NULL if the plane is not part of the global atomic state.
> + */
> +static inline struct drm_plane_state *
> +drm_atomic_get_new_plane_state(struct drm_atomic_state *state,
> + struct drm_plane *plane)
> +{
> + return state->planes[drm_plane_index(plane)].new_state;
> +}
> +
> +/**
> * drm_atomic_get_existing_connector_state - get connector state, if it exists
> * @state: global atomic state object
> * @connector: connector to grab
> @@ -299,6 +359,46 @@ drm_atomic_get_existing_connector_state(struct drm_atomic_state *state,
> }
>
> /**
> + * drm_atomic_get_old_connector_state - get connector state, if it exists
> + * @state: global atomic state object
> + * @connector: connector to grab
> + *
> + * This function returns the old connector state for the given connector,
> + * or NULL if the connector is not part of the global atomic state.
> + */
> +static inline struct drm_connector_state *
> +drm_atomic_get_old_connector_state(struct drm_atomic_state *state,
> + struct drm_connector *connector)
> +{
> + int index = drm_connector_index(connector);
> +
> + if (index >= state->num_connector)
> + return NULL;
> +
> + return state->connectors[index].old_state;
> +}
> +
> +/**
> + * drm_atomic_get_new_connector_state - get connector state, if it exists
> + * @state: global atomic state object
> + * @connector: connector to grab
> + *
> + * This function returns the new connector state for the given connector,
> + * or NULL if the connector is not part of the global atomic state.
> + */
> +static inline struct drm_connector_state *
> +drm_atomic_get_new_connector_state(struct drm_atomic_state *state,
> + struct drm_connector *connector)
> +{
> + int index = drm_connector_index(connector);
> +
> + if (index >= state->num_connector)
> + return NULL;
> +
> + return state->connectors[index].new_state;
> +}
> +
> +/**
> * __drm_atomic_get_current_plane_state - get current plane state
> * @state: global atomic state object
> * @plane: plane to grab
> --
> 2.7.4
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2016-12-28 14:25 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-16 13:58 [PATCH v2 0/4] drm/atomic: Add accessor macros for all atomic state Maarten Lankhorst
2016-11-16 13:58 ` [PATCH v2 1/4] drm/atomic: Add new iterators over all state, v2 Maarten Lankhorst
2016-11-16 13:58 ` [PATCH v2 2/4] drm/atomic: Add accessor macros for the current state Maarten Lankhorst
2016-11-16 14:35 ` Ville Syrjälä
2016-11-16 15:04 ` Daniel Vetter
2016-11-16 16:11 ` Maarten Lankhorst
2016-11-16 16:26 ` Daniel Vetter
2016-11-16 16:32 ` Ville Syrjälä
2016-11-17 11:58 ` Maarten Lankhorst
2016-11-17 12:26 ` Ville Syrjälä
2016-11-17 12:42 ` Maarten Lankhorst
2016-11-17 12:50 ` Ville Syrjälä
2016-11-17 13:20 ` [PATCH v2.1 2/4] drm/atomic: Add accessor macros for the current state, v2 Maarten Lankhorst
2016-12-09 22:27 ` Daniel Vetter
2016-12-14 13:15 ` Daniel Vetter
2016-12-15 10:24 ` [PATCH v2.2 2/4] drm/atomic: Add accessor macros for the current state, v3 Maarten Lankhorst
2016-11-16 13:58 ` [PATCH v2 3/4] drm/atomic: Add macros to access existing old/new state Maarten Lankhorst
2016-12-28 14:25 ` Daniel Vetter [this message]
2016-11-16 13:58 ` [PATCH v2 4/4] drm/atomic: Add checks to ensure get_state is not called after swapping Maarten Lankhorst
2016-11-16 14:18 ` [PATCH v2 0/4] drm/atomic: Add accessor macros for all atomic state Daniel Vetter
2016-11-16 16:11 ` Maarten Lankhorst
2016-11-16 16:27 ` Daniel Vetter
2016-12-14 13:17 ` Daniel Vetter
2016-12-15 9:19 ` Maarten Lankhorst
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161228142510.GP347@dvetter-linux.ger.corp.intel.com \
--to=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=maarten.lankhorst@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).