From: Vernon Mauery <vernon.mauery@intel.com>
To: YC Chen <yc_chen@aspeedtech.com>
Cc: "airlied@redhat.com" <airlied@redhat.com>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>,
"eich@suse.com" <eich@suse.com>
Subject: Re: [PATCH] drm/ast: Fixed system hanged if disable P2A
Date: Mon, 13 Feb 2017 11:17:30 -0800 [thread overview]
Message-ID: <20170213191730.GA71581@mauery> (raw)
In-Reply-To: <1485395140-8230-1-git-send-email-yc_chen@aspeedtech.com>
On 26-Jan-2017 01:45 AM, YC Chen wrote:
> From: "Y.C. Chen" <yc_chen@aspeedtech.com>
>
> The original ast driver will access some BMC configuration through P2A bridge
> that can be disabled since AST2300 and after.
> It will cause system hanged if P2A bridge is disabled.
> Here is the update to fix it.
>
> Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
This change worked for me on my system when I had the P2A bridge
disabled.
Tested-by: Vernon Mauery <vernon.mauery@intel.com>
--Vernon
> ---
> drivers/gpu/drm/ast/ast_drv.h | 1 +
> drivers/gpu/drm/ast/ast_main.c | 156 ++++++++++++++++++++++-------------------
> drivers/gpu/drm/ast/ast_post.c | 18 +++--
> 3 files changed, 96 insertions(+), 79 deletions(-)
>
> diff --git a/drivers/gpu/drm/ast/ast_drv.h b/drivers/gpu/drm/ast/ast_drv.h
> index 908011d..7abda94 100644
> --- a/drivers/gpu/drm/ast/ast_drv.h
> +++ b/drivers/gpu/drm/ast/ast_drv.h
> @@ -113,6 +113,7 @@ struct ast_private {
> struct ttm_bo_kmap_obj cache_kmap;
> int next_cursor;
> bool support_wide_screen;
> + bool DisableP2A;
>
> enum ast_tx_chip tx_chip_type;
> u8 dp501_maxclk;
> diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c
> index f75c642..c374685 100644
> --- a/drivers/gpu/drm/ast/ast_main.c
> +++ b/drivers/gpu/drm/ast/ast_main.c
> @@ -124,6 +124,11 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
> } else
> *need_post = false;
>
> + /* Check P2A Access */
> + ast->DisableP2A = true;
> + data = ast_read32(ast, 0xf004);
> + if (data != 0xFFFFFFFF) ast->DisableP2A = false;
> +
> /* Check if we support wide screen */
> switch (ast->chip) {
> case AST1180:
> @@ -140,15 +145,17 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post)
> ast->support_wide_screen = true;
> else {
> ast->support_wide_screen = false;
> - /* Read SCU7c (silicon revision register) */
> - ast_write32(ast, 0xf004, 0x1e6e0000);
> - ast_write32(ast, 0xf000, 0x1);
> - data = ast_read32(ast, 0x1207c);
> - data &= 0x300;
> - if (ast->chip == AST2300 && data == 0x0) /* ast1300 */
> - ast->support_wide_screen = true;
> - if (ast->chip == AST2400 && data == 0x100) /* ast1400 */
> - ast->support_wide_screen = true;
> + if (ast->DisableP2A == false) {
> + /* Read SCU7c (silicon revision register) */
> + ast_write32(ast, 0xf004, 0x1e6e0000);
> + ast_write32(ast, 0xf000, 0x1);
> + data = ast_read32(ast, 0x1207c);
> + data &= 0x300;
> + if (ast->chip == AST2300 && data == 0x0) /* ast1300 */
> + ast->support_wide_screen = true;
> + if (ast->chip == AST2400 && data == 0x100) /* ast1400 */
> + ast->support_wide_screen = true;
> + }
> }
> break;
> }
> @@ -216,80 +223,81 @@ static int ast_get_dram_info(struct drm_device *dev)
> uint32_t data, data2;
> uint32_t denum, num, div, ref_pll;
>
> - ast_write32(ast, 0xf004, 0x1e6e0000);
> - ast_write32(ast, 0xf000, 0x1);
> -
> -
> - ast_write32(ast, 0x10000, 0xfc600309);
> -
> - do {
> - if (pci_channel_offline(dev->pdev))
> - return -EIO;
> - } while (ast_read32(ast, 0x10000) != 0x01);
> - data = ast_read32(ast, 0x10004);
> -
> - if (data & 0x40)
> + if (ast->DisableP2A)
> + {
> ast->dram_bus_width = 16;
> + ast->dram_type = AST_DRAM_1Gx16;
> + ast->mclk = 396;
> + }
> else
> - ast->dram_bus_width = 32;
> + {
> + ast_write32(ast, 0xf004, 0x1e6e0000);
> + ast_write32(ast, 0xf000, 0x1);
> + data = ast_read32(ast, 0x10004);
> +
> + if (data & 0x40)
> + ast->dram_bus_width = 16;
> + else
> + ast->dram_bus_width = 32;
> +
> + if (ast->chip == AST2300 || ast->chip == AST2400) {
> + switch (data & 0x03) {
> + case 0:
> + ast->dram_type = AST_DRAM_512Mx16;
> + break;
> + default:
> + case 1:
> + ast->dram_type = AST_DRAM_1Gx16;
> + break;
> + case 2:
> + ast->dram_type = AST_DRAM_2Gx16;
> + break;
> + case 3:
> + ast->dram_type = AST_DRAM_4Gx16;
> + break;
> + }
> + } else {
> + switch (data & 0x0c) {
> + case 0:
> + case 4:
> + ast->dram_type = AST_DRAM_512Mx16;
> + break;
> + case 8:
> + if (data & 0x40)
> + ast->dram_type = AST_DRAM_1Gx16;
> + else
> + ast->dram_type = AST_DRAM_512Mx32;
> + break;
> + case 0xc:
> + ast->dram_type = AST_DRAM_1Gx32;
> + break;
> + }
> + }
>
> - if (ast->chip == AST2300 || ast->chip == AST2400) {
> - switch (data & 0x03) {
> - case 0:
> - ast->dram_type = AST_DRAM_512Mx16;
> - break;
> - default:
> - case 1:
> - ast->dram_type = AST_DRAM_1Gx16;
> - break;
> - case 2:
> - ast->dram_type = AST_DRAM_2Gx16;
> - break;
> + data = ast_read32(ast, 0x10120);
> + data2 = ast_read32(ast, 0x10170);
> + if (data2 & 0x2000)
> + ref_pll = 14318;
> + else
> + ref_pll = 12000;
> +
> + denum = data & 0x1f;
> + num = (data & 0x3fe0) >> 5;
> + data = (data & 0xc000) >> 14;
> + switch (data) {
> case 3:
> - ast->dram_type = AST_DRAM_4Gx16;
> - break;
> - }
> - } else {
> - switch (data & 0x0c) {
> - case 0:
> - case 4:
> - ast->dram_type = AST_DRAM_512Mx16;
> + div = 0x4;
> break;
> - case 8:
> - if (data & 0x40)
> - ast->dram_type = AST_DRAM_1Gx16;
> - else
> - ast->dram_type = AST_DRAM_512Mx32;
> + case 2:
> + case 1:
> + div = 0x2;
> break;
> - case 0xc:
> - ast->dram_type = AST_DRAM_1Gx32;
> + default:
> + div = 0x1;
> break;
> }
> + ast->mclk = ref_pll * (num + 2) / (denum + 2) * (div * 1000);
> }
> -
> - data = ast_read32(ast, 0x10120);
> - data2 = ast_read32(ast, 0x10170);
> - if (data2 & 0x2000)
> - ref_pll = 14318;
> - else
> - ref_pll = 12000;
> -
> - denum = data & 0x1f;
> - num = (data & 0x3fe0) >> 5;
> - data = (data & 0xc000) >> 14;
> - switch (data) {
> - case 3:
> - div = 0x4;
> - break;
> - case 2:
> - case 1:
> - div = 0x2;
> - break;
> - default:
> - div = 0x1;
> - break;
> - }
> - ast->mclk = ref_pll * (num + 2) / (denum + 2) * (div * 1000);
> return 0;
> }
>
> diff --git a/drivers/gpu/drm/ast/ast_post.c b/drivers/gpu/drm/ast/ast_post.c
> index 810c51d..5331ee1 100644
> --- a/drivers/gpu/drm/ast/ast_post.c
> +++ b/drivers/gpu/drm/ast/ast_post.c
> @@ -379,12 +379,20 @@ void ast_post_gpu(struct drm_device *dev)
> ast_open_key(ast);
> ast_set_def_ext_reg(dev);
>
> - if (ast->chip == AST2300 || ast->chip == AST2400)
> - ast_init_dram_2300(dev);
> - else
> - ast_init_dram_reg(dev);
> + if (ast->DisableP2A == false)
> + {
> + if (ast->chip == AST2300 || ast->chip == AST2400)
> + ast_init_dram_2300(dev);
> + else
> + ast_init_dram_reg(dev);
>
> - ast_init_3rdtx(dev);
> + ast_init_3rdtx(dev);
> + }
> + else
> + {
> + if (ast->tx_chip_type != AST_TX_NONE)
> + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xcf, 0x80); /* Enable DVO */
> + }
> }
>
> /* AST 2300 DRAM settings */
> --
> 1.8.3.1
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-02-13 19:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-26 1:45 [PATCH] drm/ast: Fixed system hanged if disable P2A Y.C. Chen
2017-02-13 19:17 ` Vernon Mauery [this message]
2017-02-16 3:58 ` Benjamin Herrenschmidt
2017-02-16 6:34 ` YC Chen
2017-02-16 6:43 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170213191730.GA71581@mauery \
--to=vernon.mauery@intel.com \
--cc=airlied@redhat.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=eich@suse.com \
--cc=yc_chen@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox